main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps72101dbvr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps72101dbvr-etched.glb tps72101dbvr: factory component page (tier=mfr) · Ray
tps72101dbvr-etched.step tps72101dbvr: factory component page (tier=mfr) · Ray
tps72101dbvr-hero.glb tps72101dbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps72101dbvr-hero.overlay.json tps72101dbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps72101dbvr.glb Publish 0.1.0 · Ray
tps72101dbvr.kicad_mod Publish 0.1.0 · Ray
tps72101dbvr.kicad_sym Publish 0.1.0 · Ray
tps72101dbvr.lbr Publish 0.1.0 · Ray
tps72101dbvr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TPS72101DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS72101DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage, operating range 1.8 V to 5.5 V, with a 0.1-µF ceramic bypass capacitor required.
2 GND power_in Ground.
3 EN input Enable input; logic low (below 0.4 V) shuts off the output and reduces supply current to less than 1 µA, and it may be tied to VIN if shutdown is not used.
4 FB input Feedback input for the adjustable TPS72101, connected to an external resistor divider (Vref = 1.225 V) to set the output voltage between 1.225 V and 2.5 V.
5 OUT power_out Regulated output voltage, up to 150 mA, with a 0.1-µF ceramic bypass capacitor required.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 1.8 5.5 V Minimum IN operating voltage is 1.8 V or VOUT + VDO, whichever is greater 3
Output voltage range VOUT 1.225 2.5 V TPS72101 3
Continuous output current IOUT 0 150 mA 3
Operating junction temperature TJ -40 125 °C 3
Output voltage VOUT 0.97 1.03 V TPS72101, 0 µA < IOUT < 150 mA, 1.8 V ≤ VOUT ≤ 2.5 V (limits as multiples of VO) 3
Quiescent current (GND current) IQ 85 120 µA TJ = 25°C (typ 85); max 120 over temperature range 3
Quiescent current at full load IQ 570 850 µA IOUT = 150 mA; typ at TJ = 25°C 3
Standby current 0.01 1 µA EN < 0.5 V; typ at TJ = 25°C 3
Reference voltage Vref 1.225 V TJ = 25°C 3
Ripple rejection PSRR 48 dB f = 100 Hz, Co = 10 µF, IOUT = 150 mA, TJ = 25°C 3
Current limit 175 525 mA VO = 1 V, pulse duration = 10 mS 3
Output voltage line regulation ΔVOUT/VOUT 0.03 0.09 %/V TJ = 25°C, VO + 1 V < VIN ≤ 2.5 V 3
EN high level input VIH 1.4 V 3
EN low level input VIL -0.2 0.4 V 3
EN input current II -0.01 0.01 µA EN = 0 V / EN = IN (printed -0.01 for both) 3
Dropout voltage VDO 240 mV TPS72101, IOUT = 150 mA, 1.2 V ≤ VO ≤ 5.2 V 3
Feedback input current In 1 µA TPS72101 3
Thermal shutdown temperature 170 °C 3
Thermal shutdown hysteresis 20 °C 3
Voltage range at IN -0.3 7 V 2
Voltage range at EN -0.3 7 V 2
Voltage on OUT, FB, NC -0.3 V to VI + 0.3 V 2
ESD rating, HBM 3 kV 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Thermal resistance junction-to-ambient, Low-K RΘJA 259 °C/W DBV, Low-K board 2
Thermal resistance junction-to-ambient, High-K RΘJA 180 °C/W DBV, High-K board 2
Thermal resistance junction-to-case RΘJC 65.8 °C/W DBV 2
Power rating, Low-K 386 mW TA ≤ 25°C, derating 3.9 mW/°C above 25°C 2
Power rating, High-K 555 mW TA ≤ 25°C, derating 5.6 mW/°C above 25°C 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS72101DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps72101dbvr-etched.step / tps72101dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps72101dbvr.step / tps72101dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 786de73fa1cbdb13, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF