3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS72101DBVR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS72101DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage, operating range 1.8 V to 5.5 V, with a 0.1-µF ceramic bypass capacitor required. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable input; logic low (below 0.4 V) shuts off the output and reduces supply current to less than 1 µA, and it may be tied to VIN if shutdown is not used. |
| 4 | FB | input | Feedback input for the adjustable TPS72101, connected to an external resistor divider (Vref = 1.225 V) to set the output voltage between 1.225 V and 2.5 V. |
| 5 | OUT | power_out | Regulated output voltage, up to 150 mA, with a 0.1-µF ceramic bypass capacitor required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 1.8 | 5.5 | V | Minimum IN operating voltage is 1.8 V or VOUT + VDO, whichever is greater | 3 | |
| Output voltage range | VOUT | 1.225 | 2.5 | V | TPS72101 | 3 | |
| Continuous output current | IOUT | 0 | 150 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Output voltage | VOUT | 0.97 | 1.03 | V | TPS72101, 0 µA < IOUT < 150 mA, 1.8 V ≤ VOUT ≤ 2.5 V (limits as multiples of VO) | 3 | |
| Quiescent current (GND current) | IQ | 85 | 120 | µA | TJ = 25°C (typ 85); max 120 over temperature range | 3 | |
| Quiescent current at full load | IQ | 570 | 850 | µA | IOUT = 150 mA; typ at TJ = 25°C | 3 | |
| Standby current | 0.01 | 1 | µA | EN < 0.5 V; typ at TJ = 25°C | 3 | ||
| Reference voltage | Vref | 1.225 | V | TJ = 25°C | 3 | ||
| Ripple rejection | PSRR | 48 | dB | f = 100 Hz, Co = 10 µF, IOUT = 150 mA, TJ = 25°C | 3 | ||
| Current limit | 175 | 525 | mA | VO = 1 V, pulse duration = 10 mS | 3 | ||
| Output voltage line regulation | ΔVOUT/VOUT | 0.03 | 0.09 | %/V | TJ = 25°C, VO + 1 V < VIN ≤ 2.5 V | 3 | |
| EN high level input | VIH | 1.4 | V | 3 | |||
| EN low level input | VIL | -0.2 | 0.4 | V | 3 | ||
| EN input current | II | -0.01 | 0.01 | µA | EN = 0 V / EN = IN (printed -0.01 for both) | 3 | |
| Dropout voltage | VDO | 240 | mV | TPS72101, IOUT = 150 mA, 1.2 V ≤ VO ≤ 5.2 V | 3 | ||
| Feedback input current | In | 1 | µA | TPS72101 | 3 | ||
| Thermal shutdown temperature | 170 | °C | 3 | ||||
| Thermal shutdown hysteresis | 20 | °C | 3 | ||||
| Voltage range at IN | -0.3 | 7 | V | 2 | |||
| Voltage range at EN | -0.3 | 7 | V | 2 | |||
| Voltage on OUT, FB, NC | -0.3 | V | to VI + 0.3 V | 2 | |||
| ESD rating, HBM | 3 | kV | 2 | ||||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance junction-to-ambient, Low-K | RΘJA | 259 | °C/W | DBV, Low-K board | 2 | ||
| Thermal resistance junction-to-ambient, High-K | RΘJA | 180 | °C/W | DBV, High-K board | 2 | ||
| Thermal resistance junction-to-case | RΘJC | 65.8 | °C/W | DBV | 2 | ||
| Power rating, Low-K | 386 | mW | TA ≤ 25°C, derating 3.9 mW/°C above 25°C | 2 | |||
| Power rating, High-K | 555 | mW | TA ≤ 25°C, derating 5.6 mW/°C above 25°C | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS72101DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps72101dbvr-etched.step/tps72101dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps72101dbvr.step/tps72101dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
786de73fa1cbdb13, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).