TPS7150QP

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps7150qp",
  "title": "TPS7150QP",
  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7150qp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS7150QP",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps71",
    "parts": {
      "symbol": "tps7150qp.kicad_sym",
      "footprint": "tps7150qp.kicad_mod",
      "model_3d": "tps7150qp-hero.glb",
      "model_3d_plain": "tps7150qp.glb",
      "model_3d_step": "tps7150qp-etched.step",
      "model_3d_step_plain": "tps7150qp.step",
      "lbr": "tps7150qp.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878984",
      "digikey": "2156-TPS7150QP-ND",
      "mouser": "595-TPS7150QP"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T23:41:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-TPS7150QP-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7150QP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the regulator; all voltage values in the datasheet are with respect to network terminal ground."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input, active low: a TTL high (VIH minimum 2 V, VIL maximum 0.5 V) shuts the regulator down to 0.5 µA maximum quiescent current, and EN should be tied to ground if the shutdown feature is not used."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator input; for the TPS7150Q the recommended input voltage is 5.33 V to 10 V, with an absolute maximum range of -0.3 V to 11 V."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator input (second IN pin, internally tied to pin 3); for the TPS7150Q the recommended input voltage is 5.33 V to 10 V, with an absolute maximum range of -0.3 V to 11 V."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output; the output current range is 0 mA to 500 mA, with a 2 A absolute maximum output current, and a 10-µF solid-tantalum output capacitor is required for stability."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output (second OUT pin, internally tied to pin 5); the output current range is 0 mA to 500 mA, with a 2 A absolute maximum output current, and a 10-µF solid-tantalum output capacitor is required for stability."
      },
      {
        "number": "7",
        "name": "SENSE/FB",
        "type": "input",
        "description": "On the fixed-output TPS7150 this pin is SENSE and must be connected to OUT as close to the device as possible, while the FB function applies only to the adjustable TPS7101 (Vref 1.178 V typical)."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that goes low when the output drops to between 92% and 98% of its nominal regulated value, requires an external pullup resistor, and may be left floating if unused."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 8-pin pinout comes from the shared 'D OR P PACKAGE (TOP VIEW)' figure on page 1, which the text "
        ],
        "pages_sent": 12,
        "cost_usd": 0.0813,
        "at": "2026-10-08T23:40:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps71",
        "pages": 41,
        "sha256": "6da6cbc880c8f130",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7150qp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7150qp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e8b3d7fb40532f2ac44c5e53b3d2791a2d66fe4aed74c8602a212ab46488a0cf",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "PDIP-8",
      "Category": "Power Management (PMIC)",
      "Pins": "8"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps7150qp"
  ],
  "discovery_pitch": "TPS7150QP (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7150qp.kicad_sym",
    "tps7150qp.kicad_mod",
    "tps7150qp.glb",
    "tps7150qp.step",
    "tps7150qp.lbr",
    "docs/hero.png",
    "docs/tps7150qp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7150qp-hero.glb",
    "tps7150qp-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}