component
TPS7150QP
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 1mo ago |
| viewers | 1mo ago |
| package.json | 1mo ago |
| page.json | 1mo ago |
| README.md | 1mo ago |
| tps7150qp-etched.glb | 1mo ago |
| tps7150qp-etched.step | 1mo ago |
| tps7150qp-hero.glb | 1mo ago |
| tps7150qp-hero.overlay.json | 1mo ago |
| tps7150qp.glb | 1mo ago |
| tps7150qp.kicad_mod | 1mo ago |
| tps7150qp.kicad_sym | 1mo ago |
| tps7150qp.lbr | 1mo ago |
| tps7150qp.step | 1mo ago |
TPS7150QP
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · PDIP-8
TPS7150QP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator; all voltage values in the datasheet are with respect to network terminal ground. |
| 2 | EN | input | Enable input, active low: a TTL high (VIH minimum 2 V, VIL maximum 0.5 V) shuts the regulator down to 0.5 µA maximum quiescent current, and EN should be tied to ground if the shutdown feature is not used. |
| 3 | IN | power_in | Regulator input; for the TPS7150Q the recommended input voltage is 5.33 V to 10 V, with an absolute maximum range of -0.3 V to 11 V. |
| 4 | IN | power_in | Regulator input (second IN pin, internally tied to pin 3); for the TPS7150Q the recommended input voltage is 5.33 V to 10 V, with an absolute maximum range of -0.3 V to 11 V. |
| 5 | OUT | power_out | Regulator output; the output current range is 0 mA to 500 mA, with a 2 A absolute maximum output current, and a 10-µF solid-tantalum output capacitor is required for stability. |
| 6 | OUT | power_out | Regulator output (second OUT pin, internally tied to pin 5); the output current range is 0 mA to 500 mA, with a 2 A absolute maximum output current, and a 10-µF solid-tantalum output capacitor is required for stability. |
| 7 | SENSE/FB | input | On the fixed-output TPS7150 this pin is SENSE and must be connected to OUT as close to the device as possible, while the FB function applies only to the adjustable TPS7101 (Vref 1.178 V typical). |
| 8 | PG | output | Open-drain power-good output that goes low when the output drops to between 92% and 98% of its nominal regulated value, requires an external pullup resistor, and may be left floating if unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS7150QP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tps7150qp-etched.step/tps7150qp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7150qp.step/tps7150qp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
6da6cbc880c8f130, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).