TPS7101QDR

{
  "slug": "tps7101qdr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7101qdr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7101qdr.kicad_sym",
    "tps7101qdr.kicad_mod",
    "tps7101qdr.glb",
    "tps7101qdr.step",
    "tps7101qdr.lbr",
    "docs/hero.png",
    "docs/tps7101qdr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7101qdr-hero.glb",
    "tps7101qdr-hero.overlay.json",
    "tps7101qdr-etched.glb"
  ],
  "component": {
    "mpn": "TPS7101QDR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps71.pdf",
    "parts": {
      "symbol": "tps7101qdr.kicad_sym",
      "footprint": "tps7101qdr.kicad_mod",
      "model_3d": "tps7101qdr-hero.glb",
      "model_3d_plain": "tps7101qdr-etched.glb",
      "model_3d_step": "tps7101qdr-etched.step",
      "model_3d_step_plain": "tps7101qdr.step",
      "lbr": "tps7101qdr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2861733",
      "digikey": "296-1359-2-ND",
      "mouser": "595-TPS7101QDR"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T22:54:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-1359-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS7101QDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the regulator; the datasheet states that all voltage values are with respect to network terminal ground."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input where a TTL high signal (VIH minimum 2 V) shuts down the regulator and a low level (VIL maximum 0.5 V) enables it."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply; the recommended input voltage for the TPS7101Q is 2.5 V to 10 V, and the absolute maximum input range is -0.3 V to 11 V."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply, tied in parallel with pin 3; the recommended input voltage for the TPS7101Q is 2.5 V to 10 V, and the absolute maximum input range is -0.3 V to 11 V."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output; the recommended output current range is 0 mA to 500 mA, with an absolute maximum output current of 2 A, and it requires an output capacitor for stability."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output, tied in parallel with pin 5; the recommended output current range is 0 mA to 500 mA, with an absolute maximum output current of 2 A."
      },
      {
        "number": "7",
        "name": "SENSE/FB",
        "type": "input",
        "description": "Feedback input for the adjustable TPS7101, where the output is set by an external divider against a 1.178 V typical reference, giving a 1.2 V to 9.75 V programmable range."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that goes low when the output drops to between 92% and 98% of nominal and requires a pullup resistor; its input/output rating follows the -0.3 V to 11 V absolute maximum range."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The D (SOIC-8) top view lists pin names in a left-to-right order with pin numbers 1-4 and 8-5, so th"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0214,
        "at": "2026-11-05T22:53:57"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps71.pdf",
        "pages": 41,
        "sha256": "6da6cbc880c8f130",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7101qdr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7101qdr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6d7702900b39f218db6852a2bad7c52392acab76733932f565d206f2c92fbc4a",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}