main
History Download
Ray Publish 0.1.0 3d8e0ca

TPS709B33DBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS709B33DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin; the device ground reference for all voltages and the connection point for the output capacitor ground.
2 IN input Unregulated input to the device; the input voltage range is 2.7 V to 30 V and the absolute maximum is 32 V.
3 OUT output Regulated output voltage; connect a small 2.2-µF or greater ceramic capacitor from this pin to ground to assure stability.
4 NC unconnected No internal connection.
5 EN input Enable pin: drive high to enable the device and low to put it into low-current shutdown; it may be left floating to enable the device, and the maximum voltage must remain below 6.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2.7 30 V 5
Output voltage range VOUT 1.2 6.5 V 5
VOUT DC output accuracy VOUT -1 1 % VOUT ≥ 3.3 V 5
Line regulation ΔVOUT 3 10 mV (VOUT(nom) + 1 V, 2.7 V) ≤ VIN ≤ 30 V 5
Load regulation ΔVOUT 20 50 mV VIN = VOUT(typ) + 1.5 V or 3 V (whichever is greater), 100 µA ≤ IOUT ≤ 150 mA 5
Dropout voltage (TPS70933, 3.3-V output) VDO 295 650 mV IOUT = 50 mA; VIN = 0.98 × VOUT(nom) 5
Dropout voltage (TPS70933, 3.3-V output) VDO 960 1400 mV IOUT = 150 mA; VIN = 0.98 × VOUT(nom) 5
Output current limit I(CL) 200 320 500 mA VOUT = 0.9 × VOUT(nom) 5
Ground pin current IGND 1.3 2.05 µA IOUT = 0 mA, VOUT ≤ 3.3 V 5
Start-up time tSTR 200 600 µs VOUT(nom) ≤ 3.3 V 5
Enable pin low-level input voltage VEN(LOW) 0 0.4 V Device disabled 5
Shutdown current ISHUTDOWN 150 nA VEN ≤ 0.4 V, VIN = 2.7 V (typical per text) 5
Reverse current (flowing out of IN pin) I(REV) 10 nA VOUT = 3 V, VIN = VEN = 0 V 5
Input voltage (absolute maximum) VIN -0.3 32 V All voltages with respect to GND 4
Enable voltage (absolute maximum) VEN -0.3 7 V All voltages with respect to GND 4
Output voltage (absolute maximum) VOUT -0.3 7 V All voltages with respect to GND 4
Operating junction temperature (absolute maximum) TJ -55 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN 2.7 30 V 4
Output voltage VOUT 1.2 6.5 V 4
Enable voltage VEN 0 6.5 V 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance (DBV, 5 pins) RθJA 212.1 °C/W DBV 5-pin package 4
Junction-to-case (top) thermal resistance (DBV, 5 pins) RθJC(top) 78.5 °C/W DBV 5-pin package 4
Junction-to-board thermal resistance (DBV, 5 pins) RθJB 39.5 °C/W DBV 5-pin package 4
Junction-to-top characterization parameter (DBV, 5 pins) ψJT 2.86 °C/W DBV 5-pin package 4
Junction-to-board characterization parameter (DBV, 5 pins) ψJB 38.7 °C/W DBV 5-pin package 4

CAD (KiCad official)

  • Symbol: TPS709B33DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps709b33dbvr-etched.step / tps709b33dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps709b33dbvr.step / tps709b33dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 8c14e3efae738a27, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF