Generated by kicad-footprint-generator · KiCad file format 20260206
TPS709B33DBVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS709B33DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the device ground reference for all voltages and the connection point for the output capacitor ground. |
| 2 | IN | input | Unregulated input to the device; the input voltage range is 2.7 V to 30 V and the absolute maximum is 32 V. |
| 3 | OUT | output | Regulated output voltage; connect a small 2.2-µF or greater ceramic capacitor from this pin to ground to assure stability. |
| 4 | NC | unconnected | No internal connection. |
| 5 | EN | input | Enable pin: drive high to enable the device and low to put it into low-current shutdown; it may be left floating to enable the device, and the maximum voltage must remain below 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.7 | 30 | V | 5 | ||
| Output voltage range | VOUT | 1.2 | 6.5 | V | 5 | ||
| VOUT DC output accuracy | VOUT | -1 | 1 | % | VOUT ≥ 3.3 V | 5 | |
| Line regulation | ΔVOUT | 3 | 10 | mV | (VOUT(nom) + 1 V, 2.7 V) ≤ VIN ≤ 30 V | 5 | |
| Load regulation | ΔVOUT | 20 | 50 | mV | VIN = VOUT(typ) + 1.5 V or 3 V (whichever is greater), 100 µA ≤ IOUT ≤ 150 mA | 5 | |
| Dropout voltage (TPS70933, 3.3-V output) | VDO | 295 | 650 | mV | IOUT = 50 mA; VIN = 0.98 × VOUT(nom) | 5 | |
| Dropout voltage (TPS70933, 3.3-V output) | VDO | 960 | 1400 | mV | IOUT = 150 mA; VIN = 0.98 × VOUT(nom) | 5 | |
| Output current limit | I(CL) | 200 | 320 | 500 | mA | VOUT = 0.9 × VOUT(nom) | 5 |
| Ground pin current | IGND | 1.3 | 2.05 | µA | IOUT = 0 mA, VOUT ≤ 3.3 V | 5 | |
| Start-up time | tSTR | 200 | 600 | µs | VOUT(nom) ≤ 3.3 V | 5 | |
| Enable pin low-level input voltage | VEN(LOW) | 0 | 0.4 | V | Device disabled | 5 | |
| Shutdown current | ISHUTDOWN | 150 | nA | VEN ≤ 0.4 V, VIN = 2.7 V (typical per text) | 5 | ||
| Reverse current (flowing out of IN pin) | I(REV) | 10 | nA | VOUT = 3 V, VIN = VEN = 0 V | 5 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 32 | V | All voltages with respect to GND | 4 | |
| Enable voltage (absolute maximum) | VEN | -0.3 | 7 | V | All voltages with respect to GND | 4 | |
| Output voltage (absolute maximum) | VOUT | -0.3 | 7 | V | All voltages with respect to GND | 4 | |
| Operating junction temperature (absolute maximum) | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input voltage | VIN | 2.7 | 30 | V | 4 | ||
| Output voltage | VOUT | 1.2 | 6.5 | V | 4 | ||
| Enable voltage | VEN | 0 | 6.5 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DBV, 5 pins) | RθJA | 212.1 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-case (top) thermal resistance (DBV, 5 pins) | RθJC(top) | 78.5 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-board thermal resistance (DBV, 5 pins) | RθJB | 39.5 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-top characterization parameter (DBV, 5 pins) | ψJT | 2.86 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-board characterization parameter (DBV, 5 pins) | ψJB | 38.7 | °C/W | DBV 5-pin package | 4 |
CAD (KiCad official)
- Symbol:
TPS709B33DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps709b33dbvr-etched.step/tps709b33dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps709b33dbvr.step/tps709b33dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
8c14e3efae738a27, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).