main
Ray Publish 0.1.0 211b13f
{
  "slug": "tps70202pwp",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps70202pwp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps70202pwp.kicad_sym",
    "tps70202pwp.kicad_mod",
    "tps70202pwp.glb",
    "tps70202pwp.step",
    "tps70202pwp.lbr",
    "docs/hero.png",
    "docs/tps70202pwp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps70202pwp-hero.glb",
    "tps70202pwp-hero.overlay.json",
    "tps70202pwp-etched.glb"
  ],
  "component": {
    "mpn": "TPS70202PWP",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps702.pdf",
    "parts": {
      "symbol": "tps70202pwp.kicad_sym",
      "footprint": "tps70202pwp.kicad_mod",
      "model_3d": "tps70202pwp-hero.glb",
      "model_3d_plain": "tps70202pwp-etched.glb",
      "model_3d_step": "tps70202pwp-etched.step",
      "model_3d_step_plain": "tps70202pwp.step",
      "lbr": "tps70202pwp.lbr"
    },
    "distributor_links": {
      "lcsc": "C524289",
      "mouser": "595-TPS70202PWP"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:15:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 880 calls left today"
      },
      "mouser": {
        "pn": "595-TPS70202PWP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; leave unconnected."
      },
      {
        "number": "2",
        "name": "VIN1",
        "type": "power_in",
        "description": "Input voltage of regulator 1; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V."
      },
      {
        "number": "3",
        "name": "VIN1",
        "type": "power_in",
        "description": "Input voltage of regulator 1; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V."
      },
      {
        "number": "4",
        "name": "MR",
        "type": "input",
        "description": "Manual reset input, active low, pulled up internally by a 6 µA source to VIN1; logic-low threshold 0.7 V and logic-high threshold 2 V."
      },
      {
        "number": "5",
        "name": "EN1",
        "type": "input",
        "description": "Active low enable for VOUT1; logic-high threshold 2 V, logic-low threshold 0.7 V, input current ±1 µA."
      },
      {
        "number": "6",
        "name": "EN2",
        "type": "input",
        "description": "Active low enable for VOUT2; logic-high threshold 2 V, logic-low threshold 0.7 V, input current ±1 µA."
      },
      {
        "number": "7",
        "name": "RESET",
        "type": "output",
        "description": "Open drain, active low SVS (power-on reset) output that asserts on undervoltage and needs an external pull-up resistor; it releases after a 120 ms delay (80 to 160 ms)."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "9",
        "name": "VIN2",
        "type": "power_in",
        "description": "Input voltage of regulator 2; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V."
      },
      {
        "number": "10",
        "name": "VIN2",
        "type": "power_in",
        "description": "Input voltage of regulator 2; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; leave unconnected."
      },
      {
        "number": "12",
        "name": "VOUT2",
        "type": "power_out",
        "description": "Output voltage of regulator 2, rated up to 250 mA; peak output current is 375 mA for a 2 ms pulse."
      },
      {
        "number": "13",
        "name": "VOUT2",
        "type": "power_out",
        "description": "Output voltage of regulator 2, rated up to 250 mA; peak output current is 375 mA for a 2 ms pulse."
      },
      {
        "number": "14",
        "name": "VSENSE2/FB2",
        "type": "input",
        "description": "Regulator 2 output voltage sense for fixed-output versions or feedback input for the adjustable version (1.22 V to 5.5 V); keep the connection to the divider or VOUT2 as short as possible."
      },
      {
        "number": "15",
        "name": "PG2",
        "type": "output",
        "description": "Open drain power-good output, low when VOUT2 is below 95% of its nominal regulated voltage; requires a pull-up resistor."
      },
      {
        "number": "16",
        "name": "PG1",
        "type": "output",
        "description": "Open drain power-good output, low when VOUT1 is below 95% of its nominal regulated voltage; requires a pull-up resistor."
      },
      {
        "number": "17",
        "name": "VSENSE1/FB1",
        "type": "input",
        "description": "Regulator 1 output voltage sense for fixed-output versions or feedback input for the adjustable version (1.22 V to 5.5 V); keep the connection to the divider or VOUT1 as short as possible."
      },
      {
        "number": "18",
        "name": "VOUT1",
        "type": "power_out",
        "description": "Output voltage of regulator 1, rated up to 500 mA; peak output current is 750 mA for a 2 ms pulse."
      },
      {
        "number": "19",
        "name": "VOUT1",
        "type": "power_out",
        "description": "Output voltage of regulator 1, rated up to 500 mA; peak output current is 750 mA for a 2 ms pulse."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; leave unconnected."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Terminal Functions table lists RESET as type I, but its description (and the Pin Functions secti; The datasheet's Terminal Functions table gives VIN as I and VOUT as O. They are typed here as power_; EN1 and EN2 are described as active low in the terminal table, but the Pin Functions and Detailed De",
          "exposed pad 21 added from the footprint"
        ],
        "pages_sent": 39,
        "cost_usd": 0.1547,
        "at": "2026-11-10T10:14:41"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps702.pdf",
        "pages": 39,
        "sha256": "442e41a4a4622bc2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "TSSOP",
        "height_mm": 1.2,
        "height_basis": "datasheet A, max",
        "standoff_mm": 0.1,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.24,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.128,
        "lead_thickness_basis": "default for pitch 0.65 mm, height 1.2 mm (no datasheet c read)"
      },
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps70202pwp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f3bfd8bec03b78ad5a4955c9af395a3e59902741a792ea63f9fa6e80134f4050",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps70202pwp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f4f311501d3ff8b08c966517a928e285d9ef75aa9b3a37ad38ba2019a72c0e83",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PWP",
      "source_page": 36,
      "D": {
        "nom_mm": 6.5,
        "range_mm": [
          6.4,
          6.6
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps70202pwp.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}