Generated by kicad-footprint-generator · KiCad file format 20260206
TPS70202PWP
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20
TPS70202PWP from Texas Instruments, in a HTSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave unconnected. |
| 2 | VIN1 | power_in | Input voltage of regulator 1; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V. |
| 3 | VIN1 | power_in | Input voltage of regulator 1; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V. |
| 4 | MR | input | Manual reset input, active low, pulled up internally by a 6 µA source to VIN1; logic-low threshold 0.7 V and logic-high threshold 2 V. |
| 5 | EN1 | input | Active low enable for VOUT1; logic-high threshold 2 V, logic-low threshold 0.7 V, input current ±1 µA. |
| 6 | EN2 | input | Active low enable for VOUT2; logic-high threshold 2 V, logic-low threshold 0.7 V, input current ±1 µA. |
| 7 | RESET | output | Open drain, active low SVS (power-on reset) output that asserts on undervoltage and needs an external pull-up resistor; it releases after a 120 ms delay (80 to 160 ms). |
| 8 | GND | power_in | Ground. |
| 9 | VIN2 | power_in | Input voltage of regulator 2; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V. |
| 10 | VIN2 | power_in | Input voltage of regulator 2; recommended range is 2.7 V to 6 V and absolute maximum is -0.3 V to +7 V. |
| 11 | NC | unconnected | No internal connection; leave unconnected. |
| 12 | VOUT2 | power_out | Output voltage of regulator 2, rated up to 250 mA; peak output current is 375 mA for a 2 ms pulse. |
| 13 | VOUT2 | power_out | Output voltage of regulator 2, rated up to 250 mA; peak output current is 375 mA for a 2 ms pulse. |
| 14 | VSENSE2/FB2 | input | Regulator 2 output voltage sense for fixed-output versions or feedback input for the adjustable version (1.22 V to 5.5 V); keep the connection to the divider or VOUT2 as short as possible. |
| 15 | PG2 | output | Open drain power-good output, low when VOUT2 is below 95% of its nominal regulated voltage; requires a pull-up resistor. |
| 16 | PG1 | output | Open drain power-good output, low when VOUT1 is below 95% of its nominal regulated voltage; requires a pull-up resistor. |
| 17 | VSENSE1/FB1 | input | Regulator 1 output voltage sense for fixed-output versions or feedback input for the adjustable version (1.22 V to 5.5 V); keep the connection to the divider or VOUT1 as short as possible. |
| 18 | VOUT1 | power_out | Output voltage of regulator 1, rated up to 500 mA; peak output current is 750 mA for a 2 ms pulse. |
| 19 | VOUT1 | power_out | Output voltage of regulator 1, rated up to 500 mA; peak output current is 750 mA for a 2 ms pulse. |
| 20 | NC | unconnected | No internal connection; leave unconnected. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20 |
| Category | Power Management (PMIC) |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage range (VOUT1, VSENSE1) | VOUT1, VSENSE1 | 5.5 | V | 3 | |||
| Output voltage range (VOUT2, VSENSE2) | VOUT2, VSENSE2 | 5.5 | V | 3 | |||
| Maximum RESET, PG1, PG2 voltage | 7 | V | 3 | ||||
| Input voltage range | VIN1, VIN2 | -0.3 | 7 | V | All voltages tied to network ground | 3 | |
| Voltage range at EN1, EN2 | EN1, EN2 | -0.3 | 7 | V | 3 | ||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| ESD rating, HBM | 2 | kV | HBM | 3 | |||
| Input voltage (regulator 1 and 2) | VI | 2.7 | 6 | V | 4 | ||
| Output current, regulator 1 | IO | 0 | 500 | mA | 4 | ||
| Output current, regulator 2 | IO | 0 | 250 | mA | 4 | ||
| Output voltage range (adjustable option) | 1.22 | 5.5 | V | 4 | |||
| Operating virtual junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Reference voltage | 1.196 | 1.244 | V | 2.7V < VIN < 6V, FB connected to VO | 5 | ||
| Output voltage, 1.2V output option | 1.176 | 1.224 | V | 2.7V < VIN < 6V, 1.2V output | 5 | ||
| Quiescent current (GND current) for regulator 1 and regulator 2 | 230 | μA | EN1 = EN2 = 0V; see note 2 | 5 | |||
| Output voltage line regulation (ΔVO/VO) for regulator 1 and regulator 2 | ΔVO/VO | 0.1 | %/V | VO + 1V < VIN ≤ 6V | 5 | ||
| Output current limit, regulator 1 | 1.6 | 1.9 | A | VOUT = 0V | 5 | ||
| Output current limit, regulator 2 | 0.75 | 1 | A | VOUT = 0V | 5 | ||
| UVLO threshold | 2.4 | 2.65 | V | 5 | |||
| Minimum input voltage for valid RESET | 1 | 1.3 | V | IRESET = 300μA, V(RESET) ≤ 0.8V | 5 | ||
| RESET pulse duration | t(RESET) | 80 | 120 | 160 | ms | 5 | |
| RESET output low voltage | 0.15 | 0.4 | V | VIN = 3.5V, I(RESET) = 1mA | 5 | ||
| Minimum input voltage for valid PGx | 1 | 1.3 | V | I(PGx) = 300μA, V(PGx) ≤ 0.8V | 6 | ||
| PGx trip threshold voltage | 92 | 95 | 98 | %VOUT | VO decreasing | 6 | |
| PGx output low voltage | 0.15 | 0.4 | V | VIN = 2.7V, I(PGx) = 1mA | 6 | ||
| High-level ENx input voltage | 2 | V | 6 | ||||
| Low-level ENx input voltage | 0.7 | V | 6 | ||||
| Input current (ENx) | -1 | 1 | μA | 6 | |||
| MR high-level input voltage | 2 | V | 6 | ||||
| MR low-level input voltage | 0.7 | V | 6 | ||||
| Dropout voltage, VOUT1 | 275 | mV | IO = 500mA, VIN1 = 3.2V | 6 | |||
| Dissipation rating, PWP, 0 CFM | PD | 3.067 | W | TA ≤ +25°C | 4 | ||
| Dissipation rating, PWP, 0 CFM | PD | 1.687 | W | TA = +70°C | 4 | ||
| Dissipation rating, PWP, 0 CFM | PD | 1.227 | W | TA = +85°C | 4 | ||
| Dissipation rating, PWP, 250 CFM | PD | 4.115 | W | TA ≤ +25°C | 4 | ||
| Dissipation rating, PWP, 250 CFM | PD | 2.265 | W | TA = +70°C | 4 | ||
| Dissipation rating, PWP, 250 CFM | PD | 1.646 | W | TA = +85°C | 4 | ||
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 32.6 | °C/W | 20-terminal PWP, no airflow | 28 |
CAD (KiCad official)
- Symbol:
TPS70202PWP - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps70202pwp-etched.step/tps70202pwp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps70202pwp.step/tps70202pwp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
442e41a4a4622bc2, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).