Generated by kicad-footprint-generator · KiCad file format 20260206
TPS65580PWPR
Texas Instruments · DC-DC Converters · HTSSOP-20-EP
TPS65580PWPR from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input for high-side NFET drains and 5.5V linear regulator with recommended input voltage range of 4.5V to 18V. |
| 2 | VIN | power_in | Power supply input for high-side NFET drains and 5.5V linear regulator with recommended input voltage range of 4.5V to 18V. |
| 3 | VBST1 | input | Bootstrap supply input for channel 1 high-side NFET gate drive circuit with 0.1µF capacitor connection to SW1 required, absolute maximum voltage 26V (28V transient). |
| 4 | SW1 | output | Channel 1 switch node for high-side and low-side NFETs providing current limit comparator input with voltage range -2V to 20V (-3V to 22V transient). |
| 5 | PGND1 | power_in | Channel 1 power ground return for low-side MOSFET with current comparator reference function and voltage range -0.3V to 0.3V. |
| 6 | VREG5 | power_out | Regulated 5.5V output from internal linear regulator requiring 1.0µF ceramic bypass capacitor and providing maximum output current of 20mA at 6V input. |
| 7 | PG | tri_state | Open-drain power good output that pulls low when any output voltage is outside ±16% of target voltage with 2µs response time to low and 1.5ms delay to high. |
| 8 | EN1 | input | Enable input for converter channel 1 with H-level threshold 2.0V, L-level threshold 0.4V, and input resistance 225-900kΩ. |
| 9 | VFB1 | input | D-CAP2 feedback input for channel 1 connected to output voltage divider for regulation over voltage range of 0.76V to 7.0V. |
| 10 | GND | power_in | Signal ground reference point for feedback and control signals requiring connection of VFB returns at a single point. |
| 11 | VFB2 | input | D-CAP2 feedback input for channel 2 connected to output voltage divider for regulation over voltage range of 0.76V to 7.0V. |
| 12 | VFB3 | input | D-CAP2 feedback input for channel 3 connected to output voltage divider for regulation over voltage range of 0.76V to 7.0V. |
| 13 | EN2 | input | Enable input for converter channel 2 with H-level threshold 2.0V, L-level threshold 0.4V, and input resistance 225-900kΩ. |
| 14 | VBST2 | input | Bootstrap supply input for channel 2 high-side NFET gate drive circuit with 0.1µF capacitor connection to SW2 required, absolute maximum voltage 26V (28V transient). |
| 15 | SW2 | output | Channel 2 switch node for high-side and low-side NFETs providing current limit comparator input with voltage range -2V to 20V (-3V to 22V transient). |
| 16 | PGND2 | power_in | Channel 2 power ground return for low-side MOSFET with current comparator reference function and voltage range -0.3V to 0.3V. |
| 17 | EN3 | input | Enable input for converter channel 3 with H-level threshold 2.0V, L-level threshold 0.4V, and input resistance 225-900kΩ. |
| 18 | PGND3 | power_in | Channel 3 power ground return for low-side MOSFET with current comparator reference function and voltage range -0.3V to 0.3V. |
| 19 | SW3 | output | Channel 3 switch node for high-side and low-side NFETs providing current limit comparator input with voltage range -2V to 20V (-3V to 22V transient). |
| 20 | VBST3 | input | Bootstrap supply input for channel 3 high-side NFET gate drive circuit with 0.1µF capacitor connection to SW3 required, absolute maximum voltage 26V (28V transient). |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Management (PMIC) |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN supply current | IIN | 2.9 | 3.6 | mA | TA = 25°C, EN1 = EN2 = EN3 = 5 V, VFB1 = VFB2 = VFB3 = 1.0 V, Non-switching | 4 | |
| VIN shutdown current | IVINSDN | 1.8 | 3 | µA | TA = 25°C, EN1 = EN2 = EN3 = 0 V | 4 | |
| VFBx threshold voltage | VVFBTHLx | 752 | 764 | 776 | mV | TA = 25°C, VO1=3.3V, VO2=1.2V, VO3=1.5V | 4 |
| Temperature coefficient of VFBx | TCVFBx | -180 | 180 | ppm/℃ | On the basis of 25°C | 4 | |
| Output UVP trip threshold measured on VFBx | VUVP | 63 | 68 | 73 | % | 5 | |
| PGx pull-down resistance | RPG | 50 | 85 | 130 | Ω | VPGx = 0.5 V | 5 |
| ENx input resistance | RENx_IN | 225 | 400 | 900 | kΩ | ENx = 12 V | 5 |
| Current limit (CH1) | IOCL1 | 1.7 | 2 | 3.4 | A | Lout = 3.3 µH, VOUT = 3.3 V | 5 |
| Current limit (CH2) | IOCL2 | 2.9 | 3.5 | 4.9 | A | Lout = 2.2 µH, VOUT = 1.2 V | 5 |
| Current limit (CH3) | IOCL3 | 1.8 | 2.2 | 3.6 | A | Lout = 2.2 µH, VOUT = 1.5 V | 5 |
| VIN, EN1, EN2, EN3 input voltage range (absolute maximum) | -0.3 | 20 | V | 3 | |||
| VBST1, VBST2, VBST3 (absolute maximum) | -0.3 | 26 | V | 3 | |||
| VBST1, VBST2, VBST3 (10ns transient, absolute maximum) | -0.3 | 28 | V | 3 | |||
| VBST1–SW1, VBST2–SW2, VBST3–SW3 (absolute maximum) | -0.3 | 6.5 | V | 3 | |||
| VFB1, VFB2, VFB3 (absolute maximum) | -0.3 | 6.5 | V | 3 | |||
| SW1, SW2, SW3 (absolute maximum) | -2 | 20 | V | 3 | |||
| SW1, SW2, SW3 (10ns transient, absolute maximum) | -3 | 22 | V | 3 | |||
| VREG5, PG (absolute maximum) | -0.3 | 6.5 | V | 3 | |||
| PGND1, PGND2, PGND3 (absolute maximum) | -0.3 | 0.3 | V | 3 | |||
| Operating ambient temperature range | TA | -40 | 85 | °C | 3 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 3 | ||
| Junction temperature range (absolute maximum) | TJ | -40 | 150 | °C | 3 | ||
| Supply input voltage range | VIN | 4.5 | 18 | V | 3 | ||
| VBST1, VBST2, VBST3 (recommended) | -0.1 | 24 | V | 3 | |||
| VBST1, VBST2, VBST3 (10ns transient, recommended) | -0.1 | 27 | V | 3 | |||
| VBST1–SW1, VBST2–SW2, VBST3–SW3 (recommended) | -0.1 | 5.7 | V | 3 | |||
| VFB1, VFB2, VFB3 (recommended) | -0.1 | 5.7 | V | 3 | |||
| EN1, EN2, EN3 (recommended) | -0.1 | 18 | V | 3 | |||
| SW1, SW2, SW3 (recommended) | -1 | 18 | V | 3 | |||
| SW1, SW2, SW3 (10ns transient, recommended) | -3 | 21 | V | 3 | |||
| VREG5, PG (recommended) | -0.1 | 5.7 | V | 3 | |||
| PGND1, PGND2, PGND3 (recommended) | -0.1 | 0.1 | V | 3 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| VREG5 UVLO threshold (rising) | VUVREG5 | 4 | V | VREG5 Rising | 4 | ||
| VREG5 UVLO hysteresis | VUVREG5 | 0.3 | V | Hysteresis | 4 | ||
| VREG5 output voltage | VVREG5 | 5.5 | V | TA = 25°C, VIN = 12 V, IVREG = 5 mA | 4 | ||
| VREG5 output current | IVREG5 | 20 | mA | VIN = 6 V, TA = 25°C | 4 | ||
| High side switch resistance for 2.5A (CH2) | rDS(on)H2 | 160 | mΩ | TA = 25℃, VBST2-SW2 = 5.5 V | 4 | ||
| Low side switch resistance for 2.5A (CH2) | rDS(on)L2 | 130 | mΩ | TA = 25℃ | 4 | ||
| High side switch resistance for 1.5A (CH1, CH3) | rDS(on)Hx | 250 | mΩ | TA = 25℃, VBSTx-SWx = 5.5 V | 4 | ||
| Low side switch resistance for 1.5A (CH1, CH3) | rDS(on)Lx | 230 | mΩ | TA = 25℃ | 4 | ||
| Min On Time | TONminx | 80 | ns | TA = 25°C, VOUT = 0.8V | 4 | ||
| Min Off Time | TOFFminx | 220 | ns | TA = 25°C, VFBx = 0.7 V | 4 | ||
| SW-frequency | Fsw | 700 | kHz | TA = 25°C | 4 | ||
| Soft-start time | TSS | 1.2 | ms | Internal soft-start time | 4 | ||
| PGx threshold (going high, from lower VOx) | VPGTH | 84 | % | PG from lower VOx (going high) | 5 | ||
| PGx threshold (going low, from higher VOx) | VPGTH | 116 | % | PG from higher VOx (going low) | 5 | ||
| PGx delay time (going high) | TPGDLY | 1.5 | ms | Delay for PGx going high | 5 | ||
| PGx delay time (going low) | TPGDLY | 2 | µs | Delay for PGx going low | 5 | ||
| PGOOD comparator start-up delay | TPGCOMPSS | 2.8 | ms | PGx comparator wake-up delay | 5 | ||
| ENx H-level threshold voltage | VENH | 2 | V | 5 | |||
| ENx L-level threshold voltage | VENL | 0.4 | V | 5 | |||
| Output UVP delay time | TUVPDEL | 0.5 | ms | 5 | |||
| Output UVP enable delay | TUVPEN | 2.8 | ms | UVP Enable Delay | 5 | ||
| Thermal shutdown threshold | TSD | 155 | °C | 5 | |||
| Junction-to-ambient thermal resistance | θJA | 40 | °C/W | 3 | |||
| Junction-to-case (top) thermal resistance | θJCtop | 24.8 | °C/W | 3 | |||
| Junction-to-board thermal resistance | θJB | 21.3 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
TPS65580PWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
- 3D model files:
tps65580pwpr-etched.step/tps65580pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65580pwpr.step/tps65580pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
374a34500cfd4753, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).