main
Ray tps65283rger: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dd7af0b
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps65283rger",
  "title": "TPS65283RGER",
  "brief": "Texas Instruments DC-DC Converters, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps65283rger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS65283RGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65283-1",
    "parts": {
      "symbol": "tps65283rger.kicad_sym",
      "footprint": "tps65283rger.kicad_mod",
      "model_3d": "tps65283rger-etched.glb",
      "model_3d_plain": "tps65283rger.glb",
      "model_3d_step": "tps65283rger-etched.step",
      "model_3d_step_plain": "tps65283rger.step",
      "lbr": "tps65283rger.lbr"
    },
    "distributor_links": {
      "lcsc": "C702326",
      "digikey": "TPS65283RGER-ND",
      "mouser": "595-TPS65283RGER"
    },
    "distributor_check": {
      "checked_at": "2026-09-25T14:07:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TPS65283RGER-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS65283RGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGOOD2",
        "type": "output",
        "description": "Power good indicator for buck2; asserts low when output voltage is out of regulation due to thermal shutdown, dropout, overvoltage, disabled, or during soft start."
      },
      {
        "number": "2",
        "name": "EN1",
        "type": "input",
        "description": "Enable pin for buck1; high signal enables converter, optional ceramic capacitor provides delayed startup."
      },
      {
        "number": "3",
        "name": "EN2",
        "type": "input",
        "description": "Enable pin for buck2; high signal enables converter, optional ceramic capacitor provides delayed startup."
      },
      {
        "number": "4",
        "name": "ROSC/SYNC",
        "type": "input",
        "description": "Programmable oscillator frequency from 200 kHz to 2 MHz via external resistor or external clock synchronization input."
      },
      {
        "number": "5",
        "name": "SW_EN",
        "type": "input",
        "description": "Enable input for power switch; float to enable."
      },
      {
        "number": "6",
        "name": "nFAULT",
        "type": "output",
        "description": "Active-low open-drain output; asserted low during power switch overcurrent or reverse-voltage condition."
      },
      {
        "number": "7",
        "name": "SW_OUT",
        "type": "power_out",
        "description": "Power switch output node."
      },
      {
        "number": "8",
        "name": "SW_IN",
        "type": "power_in",
        "description": "Power switch input node; input voltage range 2.4 V to 6 V."
      },
      {
        "number": "9",
        "name": "VIN2",
        "type": "power_in",
        "description": "Input power supply for buck2; connect with 10 µF ceramic capacitor as close as possible to pin."
      },
      {
        "number": "10",
        "name": "PGND2",
        "type": "power_in",
        "description": "Power ground connection for buck2; connect as close as possible to negative terminal of input capacitor."
      },
      {
        "number": "11",
        "name": "LX2",
        "type": "output",
        "description": "Switching node for buck2; voltage swings from diode drop below ground to buck2 input voltage."
      },
      {
        "number": "12",
        "name": "BST2",
        "type": "passive",
        "description": "Bootstrap supply for buck2 high-side gate driver; connect 47 nF ceramic capacitor from this pin to LX2."
      },
      {
        "number": "13",
        "name": "COMP2",
        "type": "output",
        "description": "Error amplifier output and compensation pin for buck2; connect series resistor and capacitor for control loop compensation."
      },
      {
        "number": "14",
        "name": "FB2",
        "type": "input",
        "description": "Feedback sensing pin for buck2 output voltage; feedback reference voltage 0.6 V ±1%, connect to resistor divider network."
      },
      {
        "number": "15",
        "name": "RSET",
        "type": "input",
        "description": "Power switch current limit programming pin; external resistor sets current limit threshold, recommended range 9.1 kΩ to 80.6 kΩ."
      },
      {
        "number": "16",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground common to buck and power switch controllers; route separately from power grounds to V7V bypass capacitor negative terminal."
      },
      {
        "number": "17",
        "name": "FB1",
        "type": "input",
        "description": "Feedback sensing pin for buck1 output voltage; feedback reference voltage 0.6 V ±1%, connect to resistor divider network."
      },
      {
        "number": "18",
        "name": "COMP1",
        "type": "output",
        "description": "Error amplifier output and compensation pin for buck1; connect series resistor and capacitor for control loop compensation."
      },
      {
        "number": "19",
        "name": "BST1",
        "type": "passive",
        "description": "Bootstrap supply for buck1 high-side gate driver; connect 47 nF ceramic capacitor from this pin to LX1."
      },
      {
        "number": "20",
        "name": "LX1",
        "type": "output",
        "description": "Switching node for buck1; voltage swings from diode drop below ground to buck1 input voltage."
      },
      {
        "number": "21",
        "name": "PGND1",
        "type": "power_in",
        "description": "Power ground connection for buck1; connect as close as possible to negative terminal of input capacitor."
      },
      {
        "number": "22",
        "name": "VIN1",
        "type": "power_in",
        "description": "Input power supply for buck1 and internal analog bias circuits; connect with 10 µF ceramic capacitor as close as possible to pin."
      },
      {
        "number": "23",
        "name": "V7V",
        "type": "power_out",
        "description": "Internal linear regulator output at typical 6.3 V for gate drivers and internal circuits; minimum 1 µF ceramic capacitor required for decoupling."
      },
      {
        "number": "24",
        "name": "PGOOD1",
        "type": "output",
        "description": "Power good indicator for buck1; asserts low when output voltage is out of regulation due to thermal shutdown, dropout, overvoltage, disabled, or during soft start."
      },
      {
        "number": "25",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Exposed thermal pad underneath IC package; connect to power ground with multiple vias for thermal dissipation, no internal signal connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (pin 25) is listed in Pin Functions as 'PowerPAD —' without explicit numbering in specif"
        ],
        "pages_sent": 43,
        "cost_usd": 0.4869,
        "at": "2026-09-25T14:07:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps65283-1",
        "pages": 43,
        "sha256": "eb69c587d9ca6697",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps65283rger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps65283rger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "413b1b7e236797de74c1f7041c301b3a65f4271300a6da2462de3f9473972972",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-24-EP(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps65283rger"
  ],
  "discovery_pitch": "TPS65283RGER (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps65283rger.kicad_sym",
    "tps65283rger.kicad_mod",
    "tps65283rger.glb",
    "tps65283rger.step",
    "tps65283rger.lbr",
    "docs/hero.png",
    "docs/tps65283rger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}