← Commit history

Initial commit: component/tps65265rhbr

Ray ·9122bb2e7d ·
2 files changed +364
README.mdadded+70
@@ -0,0 +1,70 @@+# TPS65265RHBR++**Texas Instruments** · DC-DC Converters · VQFN-32-EP(5x5)++TPS65265RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | V7V | power_out | Internal LDO output 6.1V typical for gate drivers and controller; connect 10µF capacitor to power ground. |+| 2 | PGOOD | tri_state | Open-drain output asserts low if any buck output voltage deviates from 92.5%-107.5% of 0.6V reference due to thermal shutdown, overcurrent, undervoltage, or enable shutdown. |+| 3 | EN1 | input | Enable input for buck1 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |+| 4 | EN2 | input | Enable input for buck2 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |+| 5 | EN3 | input | Enable input for buck3 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider. |+| 6 | FB2 | input | Feedback Kelvin sensing input for buck2 output voltage; connect to buck2 resistor divider (0.6V reference). |+| 7 | COMP2 | output | Error amplifier output for buck2 loop compensation; connect series RC network for peak current mode control loop. |+| 8 | MODE | input | Mode control input: floating or high for independent buck control via EN1/EN2/EN3; low for automatic power sequencing. |+| 9 | BST2 | power_in | Bootstrap supply for buck2 high-side gate driver; connect 47nF capacitor from BST2 to LX2 (BST-LX UVLO threshold 2.2V). |+| 10 | PGND2 | power_in | Power ground for buck2; connect as close as practical to negative terminal of PVIN2 ceramic capacitor. |+| 11 | LX2 | output | Switching node for buck2 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN2 voltage. |+| 12 | PVIN2 | power_in | Input power supply for buck2 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor. |+| 13 | PVIN3 | power_in | Input power supply for buck3 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor. |+| 14 | LX3 | output | Switching node for buck3 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN3 voltage. |+| 15 | PGND3 | power_in | Power ground for buck3; connect as close as practical to negative terminal of PVIN3 ceramic capacitor. |+| 16 | BST3 | power_in | Bootstrap supply for buck3 high-side gate driver; connect 47nF capacitor from BST3 to LX3 (BST-LX UVLO threshold 2.2V). |+| 17 | SEQ_DLY | input | Sequencing delay programming pin with 3µA pullup; connect capacitor to set buck power-up sequence interval delay time. |+| 18 | COMP3 | output | Error amplifier output for buck3 loop compensation; connect series RC network for peak current mode control loop. |+| 19 | FB3 | input | Feedback Kelvin sensing input for buck3 output voltage; connect to buck3 resistor divider (0.6V reference). |+| 20 | ROSC | input | Oscillator frequency programming pin; connect external resistor to set switching frequency from 250kHz to 2.3MHz (82.5kΩ sets 610kHz typical). |+| 21 | AGND | power_in | Analog ground common to all buck controllers and analog circuits; connect to power ground plane. |+| 22 | FB1 | input | Feedback Kelvin sensing input for buck1 output voltage; connect to buck1 resistor divider (0.6V reference). |+| 23 | COMP1 | output | Error amplifier output for buck1 loop compensation; connect series RC network for peak current mode control loop. |+| 24 | PG_DLY | input | PGOOD delay programming pin with 3µA pullup; connect external capacitor to set PGOOD assertion delay time (1.5V threshold). |+| 25 | BST1 | power_in | Bootstrap supply for buck1 high-side gate driver; connect 47nF capacitor from BST1 to LX1 (BST-LX UVLO threshold 2.2V). |+| 26 | PGND1 | power_in | Power ground for buck1; connect as close as practical to negative terminal of PVIN1 ceramic capacitor. |+| 27 | PGND1 | power_in | Power ground for buck1 (second ground pin); connect as close as practical to negative terminal of PVIN1 ceramic capacitor. |+| 28 | LX1 | output | Switching node for buck1 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN1 voltage. |+| 29 | LX1 | output | Switching node for buck1 inductor connection (second pin); voltage swings from one diode drop below ground to PVIN1 voltage. |+| 30 | PVIN1 | power_in | Input power supply for buck1 (4.5V to 17V operating range); connect as close as practical to positive terminal of 22µF ceramic capacitor. |+| 31 | PVIN1 | power_in | Input power supply for buck1 (second connection); connect as close as practical to positive terminal of 22µF ceramic capacitor. |+| 32 | PSM | input | Pulse skipping mode control: tie high or float for PSM operation; tie low for forced continuous current mode (FCCM). |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Power Supply Chip |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TPS65265RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tps65265rhbr-etched.step` / `tps65265rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps65265rhbr.step` / `tps65265rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps65265) (49 pp, sha256 `00ac4ba9df2800c1`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps65265rhbr-datasheet.pdf)
page.jsonadded+294
@@ -0,0 +1,294 @@+{+  "slug": "tps65265rhbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "tps65265rhbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps65265rhbr.kicad_sym",+    "tps65265rhbr.kicad_mod",+    "tps65265rhbr.glb",+    "tps65265rhbr.step",+    "tps65265rhbr.lbr",+    "docs/hero.png",+    "docs/tps65265rhbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS65265RHBR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "Power Supply Chip",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65265",+    "parts": {+      "symbol": "tps65265rhbr.kicad_sym",+      "footprint": "tps65265rhbr.kicad_mod",+      "model_3d": "tps65265rhbr-etched.glb",+      "model_3d_plain": "tps65265rhbr.glb",+      "model_3d_step": "tps65265rhbr-etched.step",+      "model_3d_step_plain": "tps65265rhbr.step",+      "lbr": "tps65265rhbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C545179"+    },+    "pins": [+      {+        "number": "1",+        "name": "V7V",+        "type": "power_out",+        "description": "Internal LDO output 6.1V typical for gate drivers and controller; connect 10µF capacitor to power ground."+      },+      {+        "number": "2",+        "name": "PGOOD",+        "type": "tri_state",+        "description": "Open-drain output asserts low if any buck output voltage deviates from 92.5%-107.5% of 0.6V reference due to thermal shutdown, overcurrent, undervoltage, or enable shutdown."+      },+      {+        "number": "3",+        "name": "EN1",+        "type": "input",+        "description": "Enable input for buck1 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."+      },+      {+        "number": "4",+        "name": "EN2",+        "type": "input",+        "description": "Enable input for buck2 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."+      },+      {+        "number": "5",+        "name": "EN3",+        "type": "input",+        "description": "Enable input for buck3 with 2.9µA internal pullup; float to enable; input UVLO adjustable with external resistor divider."+      },+      {+        "number": "6",+        "name": "FB2",+        "type": "input",+        "description": "Feedback Kelvin sensing input for buck2 output voltage; connect to buck2 resistor divider (0.6V reference)."+      },+      {+        "number": "7",+        "name": "COMP2",+        "type": "output",+        "description": "Error amplifier output for buck2 loop compensation; connect series RC network for peak current mode control loop."+      },+      {+        "number": "8",+        "name": "MODE",+        "type": "input",+        "description": "Mode control input: floating or high for independent buck control via EN1/EN2/EN3; low for automatic power sequencing."+      },+      {+        "number": "9",+        "name": "BST2",+        "type": "power_in",+        "description": "Bootstrap supply for buck2 high-side gate driver; connect 47nF capacitor from BST2 to LX2 (BST-LX UVLO threshold 2.2V)."+      },+      {+        "number": "10",+        "name": "PGND2",+        "type": "power_in",+        "description": "Power ground for buck2; connect as close as practical to negative terminal of PVIN2 ceramic capacitor."+      },+      {+        "number": "11",+        "name": "LX2",+        "type": "output",+        "description": "Switching node for buck2 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN2 voltage."+      },+      {+        "number": "12",+        "name": "PVIN2",+        "type": "power_in",+        "description": "Input power supply for buck2 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor."+      },+      {+        "number": "13",+        "name": "PVIN3",+        "type": "power_in",+        "description": "Input power supply for buck3 (4.5V to 17V operating range); connect as close as practical to positive terminal of 10µF ceramic capacitor."+      },+      {+        "number": "14",+        "name": "LX3",+        "type": "output",+        "description": "Switching node for buck3 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN3 voltage."+      },+      {+        "number": "15",+        "name": "PGND3",+        "type": "power_in",+        "description": "Power ground for buck3; connect as close as practical to negative terminal of PVIN3 ceramic capacitor."+      },+      {+        "number": "16",+        "name": "BST3",+        "type": "power_in",+        "description": "Bootstrap supply for buck3 high-side gate driver; connect 47nF capacitor from BST3 to LX3 (BST-LX UVLO threshold 2.2V)."+      },+      {+        "number": "17",+        "name": "SEQ_DLY",+        "type": "input",+        "description": "Sequencing delay programming pin with 3µA pullup; connect capacitor to set buck power-up sequence interval delay time."+      },+      {+        "number": "18",+        "name": "COMP3",+        "type": "output",+        "description": "Error amplifier output for buck3 loop compensation; connect series RC network for peak current mode control loop."+      },+      {+        "number": "19",+        "name": "FB3",+        "type": "input",+        "description": "Feedback Kelvin sensing input for buck3 output voltage; connect to buck3 resistor divider (0.6V reference)."+      },+      {+        "number": "20",+        "name": "ROSC",+        "type": "input",+        "description": "Oscillator frequency programming pin; connect external resistor to set switching frequency from 250kHz to 2.3MHz (82.5kΩ sets 610kHz typical)."+      },+      {+        "number": "21",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground common to all buck controllers and analog circuits; connect to power ground plane."+      },+      {+        "number": "22",+        "name": "FB1",+        "type": "input",+        "description": "Feedback Kelvin sensing input for buck1 output voltage; connect to buck1 resistor divider (0.6V reference)."+      },+      {+        "number": "23",+        "name": "COMP1",+        "type": "output",+        "description": "Error amplifier output for buck1 loop compensation; connect series RC network for peak current mode control loop."+      },+      {+        "number": "24",+        "name": "PG_DLY",+        "type": "input",+        "description": "PGOOD delay programming pin with 3µA pullup; connect external capacitor to set PGOOD assertion delay time (1.5V threshold)."+      },+      {+        "number": "25",+        "name": "BST1",+        "type": "power_in",+        "description": "Bootstrap supply for buck1 high-side gate driver; connect 47nF capacitor from BST1 to LX1 (BST-LX UVLO threshold 2.2V)."+      },+      {+        "number": "26",+        "name": "PGND1",+        "type": "power_in",+        "description": "Power ground for buck1; connect as close as practical to negative terminal of PVIN1 ceramic capacitor."+      },+      {+        "number": "27",+        "name": "PGND1",+        "type": "power_in",+        "description": "Power ground for buck1 (second ground pin); connect as close as practical to negative terminal of PVIN1 ceramic capacitor."+      },+      {+        "number": "28",+        "name": "LX1",+        "type": "output",+        "description": "Switching node for buck1 inductor and bootstrap capacitor; voltage swings from one diode drop below ground to PVIN1 voltage."+      },+      {+        "number": "29",+        "name": "LX1",+        "type": "output",+        "description": "Switching node for buck1 inductor connection (second pin); voltage swings from one diode drop below ground to PVIN1 voltage."+      },+      {+        "number": "30",+        "name": "PVIN1",+        "type": "power_in",+        "description": "Input power supply for buck1 (4.5V to 17V operating range); connect as close as practical to positive terminal of 22µF ceramic capacitor."+      },+      {+        "number": "31",+        "name": "PVIN1",+        "type": "power_in",+        "description": "Input power supply for buck1 (second connection); connect as close as practical to positive terminal of 22µF ceramic capacitor."+      },+      {+        "number": "32",+        "name": "PSM",+        "type": "input",+        "description": "Pulse skipping mode control: tie high or float for PSM operation; tie low for forced continuous current mode (FCCM)."+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad has no internal electrical signal bonded per datasheet but is mechanically and thermally; Duplicate pin numbers (26-27, 28-29, 30-31) are intentional in datasheet design for multiple low-imp",+          "exposed pad 33 added from the footprint"+        ],+        "pages_sent": 49,+        "cost_usd": 0.4649,+        "at": "2026-09-23T01:30:24"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps65265",+        "pages": 49,+        "sha256": "00ac4ba9df2800c1",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file