component
TPS65263RHBR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS65263RHBR
Texas Instruments · DC-DC Converters · VQFN-32-EP(5x5)
TPS65263RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN3 | input | Enable for buck3: float to enable, and a resistor divider on this pin can set the buck3 input UVLO. |
| 2 | SDA | bidirectional | I2C interface data pin, used with the I2C-compatible interface that supports standard mode (100 kHz) and fast mode (400 kHz). |
| 3 | SCL | input | I2C interface clock pin, used with the I2C-compatible interface that supports standard mode (100 kHz) and fast mode (400 kHz). |
| 4 | AGND | power_in | Analog ground common to the buck controllers and other analog circuits; it must be routed separately from high-current power grounds to the (-) terminal of the VIN bypass capacitor. |
| 5 | VOUT2 | input | Buck2 output voltage sense pin. |
| 6 | FB2 | input | Kelvin feedback sensing pin for the buck2 output; connect to the buck2 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 7 | COMP2 | passive | Buck2 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 8 | SS2 | input | Buck2 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 9 | BST2 | passive | Bootstrap supply for the buck2 high-side gate driver; connect a capacitor (recommended 47 nF) from BST2 to LX2. |
| 10 | LX2 | output | Buck2 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN2 voltage. |
| 11 | PGND2 | power_in | Buck2 power ground; connect as close as practical to the (-) terminal of the PVIN2 input ceramic capacitor. |
| 12 | PVIN2 | power_in | Buck2 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 13 | PVIN3 | power_in | Buck3 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 14 | PGND3 | power_in | Buck3 power ground; connect as close as practical to the (-) terminal of the PVIN3 input ceramic capacitor. |
| 15 | LX3 | output | Buck3 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN3 voltage. |
| 16 | BST3 | passive | Bootstrap supply for the buck3 high-side gate driver; connect a capacitor (recommended 47 nF) from BST3 to LX3. |
| 17 | SS3 | input | Buck3 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 18 | COMP3 | passive | Buck3 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 19 | FB3 | input | Kelvin feedback sensing pin for the buck3 output; connect to the buck3 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 20 | VOUT3 | input | Buck3 output voltage sense pin. |
| 21 | VOUT1 | input | Buck1 output voltage sense pin. |
| 22 | FB1 | input | Kelvin feedback sensing pin for the buck1 output; connect to the buck1 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 23 | COMP1 | passive | Buck1 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 24 | SS1 | input | Buck1 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 25 | BST1 | passive | Bootstrap supply for the buck1 high-side gate driver; connect a capacitor (recommended 47 nF) from BST1 to LX1. |
| 26 | LX1 | output | Buck1 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN1 voltage. |
| 27 | PGND1 | power_in | Buck1 power ground; connect as close as practical to the (-) terminal of the PVIN1 input ceramic capacitor. |
| 28 | PVIN1 | power_in | Buck1 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 29 | VIN | power_in | Buck controller power supply; recommended operating range is 4.5 V to 18 V. |
| 30 | V7V | power_out | Internal LDO output for the gate driver and internal controller; connect a 10 µF capacitor from this pin to power ground. |
| 31 | EN1 | input | Enable for buck1: float to enable, and a resistor divider on this pin can set the buck1 input UVLO. |
| 32 | EN2 | input | Enable for buck2: float to enable, and a resistor divider on this pin can set the buck2 input UVLO. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
TPS65263RHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tps65263rhbr-etched.step/tps65263rhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65263rhbr.step/tps65263rhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
68fb2fd65d5ab84d, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS65263RHBR
**Texas Instruments** · DC-DC Converters · VQFN-32-EP(5x5)
TPS65263RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN3 | input | Enable for buck3: float to enable, and a resistor divider on this pin can set the buck3 input UVLO. |
| 2 | SDA | bidirectional | I2C interface data pin, used with the I2C-compatible interface that supports standard mode (100 kHz) and fast mode (400 kHz). |
| 3 | SCL | input | I2C interface clock pin, used with the I2C-compatible interface that supports standard mode (100 kHz) and fast mode (400 kHz). |
| 4 | AGND | power_in | Analog ground common to the buck controllers and other analog circuits; it must be routed separately from high-current power grounds to the (-) terminal of the VIN bypass capacitor. |
| 5 | VOUT2 | input | Buck2 output voltage sense pin. |
| 6 | FB2 | input | Kelvin feedback sensing pin for the buck2 output; connect to the buck2 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 7 | COMP2 | passive | Buck2 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 8 | SS2 | input | Buck2 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 9 | BST2 | passive | Bootstrap supply for the buck2 high-side gate driver; connect a capacitor (recommended 47 nF) from BST2 to LX2. |
| 10 | LX2 | output | Buck2 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN2 voltage. |
| 11 | PGND2 | power_in | Buck2 power ground; connect as close as practical to the (-) terminal of the PVIN2 input ceramic capacitor. |
| 12 | PVIN2 | power_in | Buck2 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 13 | PVIN3 | power_in | Buck3 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 14 | PGND3 | power_in | Buck3 power ground; connect as close as practical to the (-) terminal of the PVIN3 input ceramic capacitor. |
| 15 | LX3 | output | Buck3 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN3 voltage. |
| 16 | BST3 | passive | Bootstrap supply for the buck3 high-side gate driver; connect a capacitor (recommended 47 nF) from BST3 to LX3. |
| 17 | SS3 | input | Buck3 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 18 | COMP3 | passive | Buck3 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 19 | FB3 | input | Kelvin feedback sensing pin for the buck3 output; connect to the buck3 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 20 | VOUT3 | input | Buck3 output voltage sense pin. |
| 21 | VOUT1 | input | Buck1 output voltage sense pin. |
| 22 | FB1 | input | Kelvin feedback sensing pin for the buck1 output; connect to the buck1 resistor divider, with a feedback reference of 0.6 V ±1%. |
| 23 | COMP1 | passive | Buck1 error amplifier output and loop compensation pin; connect a series resistor and capacitor to compensate the peak-current PWM loop. |
| 24 | SS1 | input | Buck1 soft-start and tracking input with an internal 5 µA pullup current source; soft-start time is programmed by a capacitor to ground. |
| 25 | BST1 | passive | Bootstrap supply for the buck1 high-side gate driver; connect a capacitor (recommended 47 nF) from BST1 to LX1. |
| 26 | LX1 | output | Buck1 switching node connected to the inductor and bootstrap capacitor; swings from a diode voltage below ground up to the PVIN1 voltage. |
| 27 | PGND1 | power_in | Buck1 power ground; connect as close as practical to the (-) terminal of the PVIN1 input ceramic capacitor. |
| 28 | PVIN1 | power_in | Buck1 input power supply; connect as close as practical to the (+) terminal of an input ceramic capacitor (suggested 10 µF). |
| 29 | VIN | power_in | Buck controller power supply; recommended operating range is 4.5 V to 18 V. |
| 30 | V7V | power_out | Internal LDO output for the gate driver and internal controller; connect a 10 µF capacitor from this pin to power ground. |
| 31 | EN1 | input | Enable for buck1: float to enable, and a resistor divider on this pin can set the buck1 input UVLO. |
| 32 | EN2 | input | Enable for buck2: float to enable, and a resistor divider on this pin can set the buck2 input UVLO. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `TPS65263RHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `tps65263rhbr-etched.step` / `tps65263rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps65263rhbr.step` / `tps65263rhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps65263) (48 pp, sha256 `68fb2fd65d5ab84d`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps65263rhbr-datasheet.pdf)