main
Ray Publish 0.1.0 2b24a11
{
  "slug": "tps65162rgzr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LCD Drivers, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "tps65162rgzr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps65162rgzr.kicad_sym",
    "tps65162rgzr.kicad_mod",
    "tps65162rgzr.glb",
    "tps65162rgzr.step",
    "tps65162rgzr.lbr",
    "docs/hero.png",
    "docs/tps65162rgzr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps65162rgzr-hero.glb",
    "tps65162rgzr-hero.overlay.json",
    "tps65162rgzr-etched.glb"
  ],
  "component": {
    "mpn": "TPS65162RGZR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LCD Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65162",
    "parts": {
      "symbol": "tps65162rgzr.kicad_sym",
      "footprint": "tps65162rgzr.kicad_mod",
      "model_3d": "tps65162rgzr-hero.glb",
      "model_3d_plain": "tps65162rgzr-etched.glb",
      "model_3d_step": "tps65162rgzr-etched.step",
      "model_3d_step_plain": "tps65162rgzr.step",
      "lbr": "tps65162rgzr.lbr"
    },
    "distributor_links": {
      "lcsc": "C882737",
      "digikey": "296-21974-2-ND",
      "mouser": "595-TPS65162RGZR"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:40:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-21974-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS65162RGZR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "POS1",
        "type": "input",
        "description": "Non-inverting input of operational amplifier 1."
      },
      {
        "number": "2",
        "name": "OUT1",
        "type": "output",
        "description": "Output of operational amplifier 1."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Gate voltage shaping threshold pin: five times the voltage applied to this pin sets the discharge threshold for the gate voltage shaping function."
      },
      {
        "number": "4",
        "name": "CE",
        "type": "input",
        "description": "Sets the delay between the falling edge of VFLK and the falling edge of VGHM for gate voltage shaping."
      },
      {
        "number": "5",
        "name": "VFLK",
        "type": "input",
        "description": "Control input for gate voltage shaping, with VIH of 1.7 V minimum and VIL of 0.4 V maximum."
      },
      {
        "number": "6",
        "name": "VDPM",
        "type": "input",
        "description": "Enable input for the gate voltage shaping block, with VIH of 2.0 V minimum and VIL of 0.8 V maximum."
      },
      {
        "number": "7",
        "name": "RE",
        "type": "output",
        "description": "Slope adjustment of gate voltage shaping; a resistor connected to this pin adjusts the slope."
      },
      {
        "number": "8",
        "name": "VGHM",
        "type": "output",
        "description": "Output of the gate voltage shaping block."
      },
      {
        "number": "9",
        "name": "VGH",
        "type": "input",
        "description": "High-voltage input for the gate voltage shaping block; connect the positive charge-pump output to this pin."
      },
      {
        "number": "10",
        "name": "FBP",
        "type": "input",
        "description": "Feedback input of the positive charge pump, regulated to a VFB of 1.265 V typical."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Ground for the positive and negative charge pumps."
      },
      {
        "number": "12",
        "name": "DRVP",
        "type": "output",
        "description": "Drive pin of the positive charge pump."
      },
      {
        "number": "13",
        "name": "SUP",
        "type": "power_in",
        "description": "Supply pin of the positive charge pump; absolute maximum rating is 25 V."
      },
      {
        "number": "14",
        "name": "DRVN",
        "type": "output",
        "description": "Drive pin of the negative charge pump."
      },
      {
        "number": "15",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "16",
        "name": "FBN",
        "type": "input",
        "description": "Feedback input of the negative charge pump, with VFB regulation of 0 V nominal (±48 mV)."
      },
      {
        "number": "17",
        "name": "REF",
        "type": "output",
        "description": "Internal reference output; connect a 220-nF capacitor directly from this pin to AGND to minimize noise coupling."
      },
      {
        "number": "18",
        "name": "DLY1",
        "type": "output",
        "description": "A capacitor from this pin to GND sets the delay between the step-down converter and the negative charge pump VGL."
      },
      {
        "number": "19",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "21",
        "name": "FBB",
        "type": "input",
        "description": "Feedback input of the buck converter."
      },
      {
        "number": "22",
        "name": "CBOOT",
        "type": "input",
        "description": "N-channel MOSFET gate drive voltage for the buck converter; connect a capacitor from this pin to SWB."
      },
      {
        "number": "23",
        "name": "SWB",
        "type": "output",
        "description": "Switch pin of the buck converter."
      },
      {
        "number": "24",
        "name": "SWB",
        "type": "output",
        "description": "Switch pin of the buck converter."
      },
      {
        "number": "25",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power input for the buck converter; recommended input voltage range is 8 V to 14.7 V."
      },
      {
        "number": "26",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power input for the buck converter; recommended input voltage range is 8 V to 14.7 V."
      },
      {
        "number": "27",
        "name": "VIN",
        "type": "power_in",
        "description": "Analog input voltage of the device; bypass with a 1-µF capacitor for good filtering."
      },
      {
        "number": "28",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency selection: FREQ high gives 750 kHz operation and FREQ low gives 500 kHz operation."
      },
      {
        "number": "29",
        "name": "DLY2",
        "type": "output",
        "description": "A capacitor from this pin to GND sets the delay between the step-down converter and the positive charge pump VGH."
      },
      {
        "number": "30",
        "name": "SS",
        "type": "output",
        "description": "Soft-start of the boost converter; connect a capacitor from this pin to GND."
      },
      {
        "number": "31",
        "name": "VC",
        "type": "output",
        "description": "Compensation pin of the boost converter."
      },
      {
        "number": "32",
        "name": "EN2",
        "type": "input",
        "description": "Enable pin of the boost converter block."
      },
      {
        "number": "33",
        "name": "EN1",
        "type": "input",
        "description": "Enables the buck converter and, after a delay set by DLY1, the negative charge pump; logic high enables the device and logic low shuts it down."
      },
      {
        "number": "34",
        "name": "PGND1",
        "type": "power_in",
        "description": "Power ground; the thermally enhanced PowerPAD is connected to PGND1."
      },
      {
        "number": "35",
        "name": "PGND2",
        "type": "power_in",
        "description": "Ground for the boost converter."
      },
      {
        "number": "36",
        "name": "PGND3",
        "type": "power_in",
        "description": "Power ground pin; the datasheet gives no separate function for this pin beyond the terminal table entry."
      },
      {
        "number": "37",
        "name": "SW",
        "type": "input",
        "description": "Switch pin of the boost converter."
      },
      {
        "number": "38",
        "name": "SW",
        "type": "input",
        "description": "Switch pin of the boost converter."
      },
      {
        "number": "39",
        "name": "SWI",
        "type": "input",
        "description": "Input of the isolation switch, connected to the internal overvoltage protection comparator."
      },
      {
        "number": "40",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "41",
        "name": "FB",
        "type": "input",
        "description": "Feedback input of the boost converter that generates Vs."
      },
      {
        "number": "42",
        "name": "SWO",
        "type": "output",
        "description": "Output of the isolation switch."
      },
      {
        "number": "43",
        "name": "AVIN",
        "type": "power_in",
        "description": "Power input for the operational amplifiers; connect to the isolation switch input SWI and bypass with a 1-µF capacitor."
      },
      {
        "number": "44",
        "name": "NEG2",
        "type": "input",
        "description": "Inverting input of operational amplifier 2."
      },
      {
        "number": "45",
        "name": "POS2",
        "type": "input",
        "description": "Non-inverting input of operational amplifier 2."
      },
      {
        "number": "46",
        "name": "OUT2",
        "type": "output",
        "description": "Output of operational amplifier 2."
      },
      {
        "number": "47",
        "name": "OGND",
        "type": "power_in",
        "description": "Ground for the operational amplifiers."
      },
      {
        "number": "48",
        "name": "NEG1",
        "type": "input",
        "description": "Inverting input of operational amplifier 1."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad (PowerPAD) is not given a pin number in the datasheet; it is connected to PG; The PGND3 description is not stated separately in the terminal table; the 'Ground for boost converte; Pins 19, 20 and 40 are labeled NC in the terminal table and are typed unconnected.",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0816,
        "at": "2026-10-28T21:39:43"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps65162",
        "pages": 38,
        "sha256": "921e37c5bfd6fb38",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps65162rgzr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps65162rgzr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8e03dd5b6944480220f8c8f4607ae60a6037c972f73ed0310fa0fbdc23695dc8",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RGZ0048B",
      "source_page": 35,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.85,
          7.15
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.85,
          7.15
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps65162rgzr.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}