main
Ray
Publish 0.1.0
694ae4b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321
{
"slug": "tps65161pwpr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Power Management Specialized - PMIC, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"tps65161pwpr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps65161pwpr.kicad_sym",
"tps65161pwpr.kicad_mod",
"tps65161pwpr.glb",
"tps65161pwpr.step",
"tps65161pwpr.lbr",
"docs/hero.png",
"docs/tps65161pwpr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps65161pwpr-hero.glb",
"tps65161pwpr-hero.overlay.json"
],
"component": {
"mpn": "TPS65161PWPR",
"manufacturer": "Texas Instruments",
"package": "HTSSOP-28-EP",
"pin_count": 29,
"category": "Power Supply Chip",
"subcategory": "Power Management Specialized - PMIC",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps65161",
"parts": {
"symbol": "tps65161pwpr.kicad_sym",
"footprint": "tps65161pwpr.kicad_mod",
"model_3d": "tps65161pwpr-hero.glb",
"model_3d_plain": "tps65161pwpr.glb",
"model_3d_step": "tps65161pwpr-etched.step",
"model_3d_step_plain": "tps65161pwpr.step",
"lbr": "tps65161pwpr.lbr"
},
"distributor_links": {
"lcsc": "C2155944",
"digikey": "296-19673-2-ND",
"mouser": "595-TPS65161PWPR"
},
"distributor_check": {
"checked_at": "2026-10-11T16:56:25Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-19673-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS65161PWPR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "FB",
"type": "input",
"description": "Feedback input of the main boost converter that generates the source voltage VS."
},
{
"number": "2",
"name": "COMP",
"type": "passive",
"description": "Compensation pin for the main boost converter, where a small capacitor and, if required, a resistor is connected."
},
{
"number": "3",
"name": "OS",
"type": "input",
"description": "Output sense pin connected to the boost rectifier switch and overvoltage protection comparator; it must connect only to the boost converter output, with a 470-nF capacitor to GND and a wide PCB trace because it conducts high current."
},
{
"number": "4",
"name": "SW",
"type": "input",
"description": "Switch pin of the boost converter generating VS."
},
{
"number": "5",
"name": "SW",
"type": "input",
"description": "Switch pin of the boost converter generating VS."
},
{
"number": "6",
"name": "PGND",
"type": "power_in",
"description": "Power ground; the PowerPAD is connected to PGND."
},
{
"number": "7",
"name": "PGND",
"type": "power_in",
"description": "Power ground; the PowerPAD is connected to PGND."
},
{
"number": "8",
"name": "SUP",
"type": "input",
"description": "Supply pin of the positive charge pump driver, connected to VIN or to the boost converter output VS depending on the desired VGH and number of charge pump stages."
},
{
"number": "9",
"name": "EN2",
"type": "input",
"description": "Enable for the boost converter and positive charge pump, which start after the buck converter is in regulation and the DLY2 delay has passed; logic high enables and logic low shuts down, and the pin must not be left floating."
},
{
"number": "10",
"name": "DRP",
"type": "output",
"description": "Drive pin of the positive charge pump."
},
{
"number": "11",
"name": "DRN",
"type": "output",
"description": "Drive pin of the negative charge pump."
},
{
"number": "12",
"name": "FREQ",
"type": "input",
"description": "Frequency adjust pin that sets the switching frequency with a logic level: low for 500 kHz and high for 750 kHz."
},
{
"number": "13",
"name": "FBN",
"type": "input",
"description": "Feedback pin of the negative charge pump."
},
{
"number": "14",
"name": "FBP",
"type": "input",
"description": "Feedback pin of the positive charge pump."
},
{
"number": "15",
"name": "FBB",
"type": "input",
"description": "Feedback pin of the buck converter."
},
{
"number": "16",
"name": "EN1",
"type": "input",
"description": "Enable for the buck converter and negative charge pump, with the negative pump starting after the DLY1 delay; logic high enables and logic low shuts down, and the pin must not be left floating."
},
{
"number": "17",
"name": "BOOT",
"type": "input",
"description": "Gate drive voltage for the buck converter's N-channel MOSFET, with a capacitor connected from the switch node SWB to this pin."
},
{
"number": "18",
"name": "SWB",
"type": "output",
"description": "Switch pin of the buck converter."
},
{
"number": "19",
"name": "NC",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "20",
"name": "VINB",
"type": "power_in",
"description": "Power input voltage pin for the buck converter."
},
{
"number": "21",
"name": "VINB",
"type": "power_in",
"description": "Power input voltage pin for the buck converter."
},
{
"number": "22",
"name": "AVIN",
"type": "input",
"description": "Analog input voltage of the device, which should be bypassed with a 1-μF ceramic capacitor for good filtering."
},
{
"number": "23",
"name": "GND",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "24",
"name": "REF",
"type": "output",
"description": "Internal reference output, typically 1.213 V, which requires a 220-nF capacitor connected to this pin."
},
{
"number": "25",
"name": "DLY1",
"type": "output",
"description": "A capacitor from this pin to GND sets the delay between V(LOGIC) going high and the start-up of VGL."
},
{
"number": "26",
"name": "DLY2",
"type": "output",
"description": "A capacitor from this pin to GND sets the delay between V(LOGIC) going high and the start-up of the VS boost converter and positive charge pump VGH."
},
{
"number": "27",
"name": "GD",
"type": "output",
"description": "Gate drive pin for an external MOSFET isolation switch on VS or VGH; it is an open-drain output latched low once the boost converter is within 8% of its nominal output and goes high impedance when EN2 is cycled low."
},
{
"number": "28",
"name": "SS",
"type": "output",
"description": "Sets the soft-start time for the main boost converter VS, typically with a 22-nF capacitor connected to this pin."
},
{
"number": "29",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The PowerPAD thermal pad is not a numbered lead on the 28-pin package. The datasheet says it is conn; The datasheet pin table gives no I/O type for COMP. It was classified as passive based on its descri; GD is described as an open-drain output. The enum has no open-drain class, so it was mapped to outpu",
"exposed pad 29 added from the footprint"
],
"pages_sent": 9,
"cost_usd": 0.0681,
"at": "2026-10-11T16:56:11"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps65161",
"pages": 33,
"sha256": "04d74956b7c1cff2",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps65161pwpr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps65161pwpr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7db18f3035a261f7b1e14e5dfe2db0a085033c329e3d49fa5baad802b0b95cec",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}