main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps65132wrvcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps65132wrvcr: viewers · Ray
package.json tps65132wrvcr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps65132wrvcr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps65132wrvcr · Ray
tps65132wrvcr-etched.fit.json tps65132wrvcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps65132wrvcr-etched.glb tps65132wrvcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps65132wrvcr-etched.step tps65132wrvcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps65132wrvcr.glb Publish 0.1.0 · Ray
tps65132wrvcr.kicad_mod Publish 0.1.0 · Ray
tps65132wrvcr.kicad_sym Publish 0.1.0 · Ray
tps65132wrvcr.lbr Publish 0.1.0 · Ray
tps65132wrvcr.step Publish 0.1.0 · Ray

TPS65132WRVCR

Texas Instruments · LCD Drivers · WQFN-20-EP(3x4)

TPS65132WRVCR from Texas Instruments, in a WQFN-20-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground; common ground return for all power circuits and boost converter.
2 PGND power_in Power ground; common ground return for all power circuits and boost converter.
3 AGND power_in Analog ground; common ground return for analog circuits and internal control circuitry.
4 VIN power_in Input voltage supply pin accepting 2.5V to 5.5V from single-cell battery or regulated supply.
5 ENP input Enable pin for positive supply rail (VPOS); logic input that enables the LDO regulator when HIGH.
6 ENN input Enable pin for negative supply rail (VNEG); logic input that enables the charge pump when HIGH.
7 SDA bidirectional I²C interface data signal pin; open-drain output compatible with 100kHz standard mode or 400kHz fast mode operation.
8 SCL bidirectional I²C interface clock signal pin; open-drain output compatible with 100kHz standard mode or 400kHz fast mode operation.
9 OUTN output Output pin of negative charge pump delivering VNEG supply programmable from -6.0V to -4.0V with 80mA maximum output current.
10 CFLY2 passive Negative charge pump flying capacitor pin; connects external 2.2μF to 4.7μF capacitor required for charge pump operation.
11 PGND power_in Power ground; common ground return for all power circuits and boost converter.
12 PGND power_in Power ground; common ground return for all power circuits and boost converter.
13 CFLY1 passive Negative charge pump flying capacitor pin; connects external 2.2μF to 4.7μF capacitor required for charge pump operation.
14 REG output Boost converter regulated output pin supplying intermediate voltage to LDO and charge pump, automatically adjusted based on programmed VPOS and VNEG.
15 OUTP output Output pin of LDO (VPOS) delivering positive supply voltage programmable from 4.0V to 6.0V with 200mA maximum output current.
16 OUTP output Output pin of LDO (VPOS) delivering positive supply voltage programmable from 4.0V to 6.0V with 200mA maximum output current.
17 AGND power_in Analog ground; common ground return for analog circuits and internal control circuitry.
18 REG output Boost converter regulated output pin supplying intermediate voltage to LDO and charge pump, automatically adjusted based on programmed VPOS and VNEG.
19 SW output Boost converter switch node connecting internal synchronous switch to external inductor, operating at 1.35MHz to 2.25MHz with valley current limit of 0.9A to 1.5A.
20 SW output Boost converter switch node connecting internal synchronous switch to external inductor, operating at 1.35MHz to 2.25MHz with valley current limit of 0.9A to 1.5A.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-20-EP(3x4)
Category LED Drivers
Pins 21

CAD (KiCad official)

  • Symbol: TPS65132WRVCR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm
  • 3D model: WQFN-20-EP(3x4) (KiCad packages3D, STEP)
  • 3D model files: tps65132wrvcr-etched.step / tps65132wrvcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps65132wrvcr.step / tps65132wrvcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (68 pp, sha256 5ac6160cd04df74e, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF