component
TPS65132WRVCR
Public Made by Adomby adom
Texas Instruments LCD Drivers, WQFN-20-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS65132WRVCR
Texas Instruments · LCD Drivers · WQFN-20-EP(3x4)
TPS65132WRVCR from Texas Instruments, in a WQFN-20-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground; common ground return for all power circuits and boost converter. |
| 2 | PGND | power_in | Power ground; common ground return for all power circuits and boost converter. |
| 3 | AGND | power_in | Analog ground; common ground return for analog circuits and internal control circuitry. |
| 4 | VIN | power_in | Input voltage supply pin accepting 2.5V to 5.5V from single-cell battery or regulated supply. |
| 5 | ENP | input | Enable pin for positive supply rail (VPOS); logic input that enables the LDO regulator when HIGH. |
| 6 | ENN | input | Enable pin for negative supply rail (VNEG); logic input that enables the charge pump when HIGH. |
| 7 | SDA | bidirectional | I²C interface data signal pin; open-drain output compatible with 100kHz standard mode or 400kHz fast mode operation. |
| 8 | SCL | bidirectional | I²C interface clock signal pin; open-drain output compatible with 100kHz standard mode or 400kHz fast mode operation. |
| 9 | OUTN | output | Output pin of negative charge pump delivering VNEG supply programmable from -6.0V to -4.0V with 80mA maximum output current. |
| 10 | CFLY2 | passive | Negative charge pump flying capacitor pin; connects external 2.2μF to 4.7μF capacitor required for charge pump operation. |
| 11 | PGND | power_in | Power ground; common ground return for all power circuits and boost converter. |
| 12 | PGND | power_in | Power ground; common ground return for all power circuits and boost converter. |
| 13 | CFLY1 | passive | Negative charge pump flying capacitor pin; connects external 2.2μF to 4.7μF capacitor required for charge pump operation. |
| 14 | REG | output | Boost converter regulated output pin supplying intermediate voltage to LDO and charge pump, automatically adjusted based on programmed VPOS and VNEG. |
| 15 | OUTP | output | Output pin of LDO (VPOS) delivering positive supply voltage programmable from 4.0V to 6.0V with 200mA maximum output current. |
| 16 | OUTP | output | Output pin of LDO (VPOS) delivering positive supply voltage programmable from 4.0V to 6.0V with 200mA maximum output current. |
| 17 | AGND | power_in | Analog ground; common ground return for analog circuits and internal control circuitry. |
| 18 | REG | output | Boost converter regulated output pin supplying intermediate voltage to LDO and charge pump, automatically adjusted based on programmed VPOS and VNEG. |
| 19 | SW | output | Boost converter switch node connecting internal synchronous switch to external inductor, operating at 1.35MHz to 2.25MHz with valley current limit of 0.9A to 1.5A. |
| 20 | SW | output | Boost converter switch node connecting internal synchronous switch to external inductor, operating at 1.35MHz to 2.25MHz with valley current limit of 0.9A to 1.5A. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-20-EP(3x4) |
| Category | LED Drivers |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS65132WRVCR - Footprint:
Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm - 3D model: WQFN-20-EP(3x4) (KiCad packages3D, STEP)
- 3D model files:
tps65132wrvcr-etched.step/tps65132wrvcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65132wrvcr.step/tps65132wrvcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (68 pp, sha256
5ac6160cd04df74e, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).