main
Ray tps65131trgerq1: specified limits as data (metadata.characteristics, 51 rows from the datasheet) ffcdb90

TPS65131TRGERQ1

Texas Instruments · DC-DC Converters · VQFN-24-EP(4x4)

TPS65131TRGERQ1 from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INP power_in Boost converter input power supply pin, 2.7V to 5.5V operating range
2 PGND power_in Power ground pin
3 PGND power_in Power ground pin
4 VIN power_in Control supply input, operating voltage range 2.7V to 5.5V
5 INN power_in Inverting converter input power supply pin, 2.7V to 5.5V operating range
6 INN power_in Inverting converter input power supply pin, 2.7V to 5.5V operating range
7 BSW output Gate-control pin for external battery switch PMOS, goes low when ENP is set high
8 ENP input Enable pin for positive-output voltage, 0V disabled and VIN enabled
9 PSP input Power-save mode enable for boost converter stage, 0V disabled and VIN enabled
10 ENN input Enable pin for negative-output voltage, 0V disabled and VIN enabled
11 PSN input Power-save mode enable for inverter stage, 0V disabled and VIN enabled
12 NC unconnected No internal connection
13 OUTN bidirectional Inverting converter switch output, provides negative output voltage VNEG
14 OUTN bidirectional Inverting converter switch output, provides negative output voltage VNEG
15 VNEG input Negative-output voltage-sense input for feedback divider
16 FBN input Feedback pin for negative-output voltage divider, nominal voltage 0V
17 VREF power_in Reference output voltage 1.213V, bypass with 220nF capacitor to ground
18 CN bidirectional Compensation pin for inverting converter control, requires external capacitor
19 AGND power_in Analog ground pin, reference for control circuits
20 NC unconnected No internal connection
21 CP bidirectional Compensation pin for boost converter control, requires external capacitor
22 FBP input Feedback pin for positive-output voltage divider, nominal voltage 1.213V
23 VPOS input Positive-output voltage-sense input for feedback divider
24 INP power_in Boost converter input power supply pin, 2.7V to 5.5V operating range
25 Thermal Pad power_in Thermal pad for thermal performance, connect to PGND

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Power Management (PMIC)
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range at pins VIN, INN -0.3 6 V With respect to network ground 4
Voltage at pin VPOS -0.3 17 V With respect to network ground 4
Voltage at pin VNEG -17 V Printed max is V(VIN) + 0.3 V; not a fixed number 4
Voltage at pins ENN, ENP, FBP, FBN, CN, CP, PSP, PSN, BSW -0.3 V Printed max is V(VIN) + 0.3 V; not a fixed number 4
Input voltage at pin INP -0.3 17 V 4
Differential voltage between pins OUTN to INN -0.3 24 V 4
Thermal pad voltage -0.3 0.3 V 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature range Tstg -65 150 °C 4
ESD human body model (HBM) V(ESD) -1000 1000 V Per AEC Q100-002; printed as ±1000 V 4
ESD charged device model (CDM) V(ESD) -750 750 V Per AEC Q100-011; printed as ±750 V 4
Application input voltage range (VIN, INN pins) VI 2.7 5.5 V Over operating free-air temperature 4
Adjustable output voltage range, boost converter VPOS 15 V Printed min is VI + 0.5 V; not a fixed number 4
Adjustable output voltage range, inverting converter VNEG -15 -2 V 4
Enable signals voltage V(ENN), V(ENP) 0 5.5 V 4
Power-save mode enable signals voltage V(PSN), V(PSP) 0 5.5 V 4
Operating free-air temperature range TA -40 105 °C May require derating at high power dissipation (see Thermal Information) 4
Operating junction temperature range TJ -40 125 °C 4
Reference voltage Vref 1.2 1.213 1.225 V Iref = 10µA 5
Positive feedback input bias current I(FBP) 50 nA V(FBP) = Vref 5
Negative feedback input bias current I(FBN) 50 nA V(FBN) = 0.1Vref 5
Positive feedback regulation voltage V(FBP) 1.189 1.213 1.237 V 5
Negative feedback regulation voltage V(FBN) -0.024 0 0.024 V 5
Inverter switch on-resistance rDS(on)(N) 440 620 mΩ V(VIN) = 3.6V 5
Inverter switch on-resistance rDS(on)(N) 330 530 mΩ V(VIN) = 5V 5
Inverter switch current limit I(L IM-N) 1700 1950 2200 mA V(VIN) = 3.6V 5
Boost switch on-resistance rDS(on)(P) 230 390 mΩ V(POS) = 5V 5
Boost switch on-resistance rDS(on)(P) 170 230 mΩ V(POS) = 10V 5
Boost switch current limit I(LIM-P) 1700 1950 2250 mA V(VIN) = 3.6V, V(POS) = 8V 5
High-level input voltage, ENP, ENN, PSP, PSN VIH 1.4 V 5
Low-level input voltage, ENP, ENN, PSP, PSN VIL 0.4 V 5
Input current, ENP, ENN, PSP, PSN 0.01 0.1 µA ENP, ENN, PSP, PSN connected to GND or VIN 5
Quiescent current (into VIN and INN) IQ 300 500 µA V(VIN) = 3.6V, I(POS) = I(NEG) = 0, ENP = ENN = PSP = PSN = V(VIN), V(POS) = 8V, V(NEG) = –5V 5
Quiescent current (VPOS row) IQ 100 120 µA 5
Quiescent current (VNEG row) IQ 100 120 µA 5
Shutdown supply current ISD 0.2 1.5 µA ENN = ENP = LOW, TA = –40°C to 85°C 5
Undervoltage lockout threshold V(UVLO) 2.1 2.35 2.7 V 5
Oscillator frequency f 1150 1380 1500 kHz 6
Maximum-duty-cycle, boost converter D(MAX-P) 87.5 % 6
Maximum-duty-cycle, inverting converter D(MAX-N) 87.5 % 6
Minimum-duty-cycle, boost converter D(MIN-P) 12.5 % 6
Minimum-duty-cycle, inverting converter D(MIN-N) 12.5 % 6
Output resistance R(BSW) 27 kΩ 5
Thermal shutdown T(TS) 150 °C 5
Thermal shutdown hysteresis T(TS-HYS) 5 °C Junction temperature decreasing 5
Junction-to-ambient thermal resistance RθJA 34.1 °C/W RGE package, 24 pins 5
Junction-to-case (top) thermal resistance RθJCtop 36.8 °C/W RGE package, 24 pins 5
Junction-to-board thermal resistance RθJB 12.2 °C/W RGE package, 24 pins 5
Junction-to-top characterization parameter ψJT 0.4 °C/W RGE package, 24 pins 5
Junction-to-board characterization parameter ψJB 12.3 °C/W RGE package, 24 pins 5
Junction-to-case (bottom) thermal resistance RθJCbot 2.8 °C/W RGE package, 24 pins 5

CAD (KiCad official)

  • Symbol: TPS65131TRGERQ1
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tps65131trgerq1-etched.step / tps65131trgerq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps65131trgerq1.step / tps65131trgerq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 efe07626c61b9749, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF