component
TPS65131TRGERQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS65131TRGERQ1
Texas Instruments · DC-DC Converters · VQFN-24-EP(4x4)
TPS65131TRGERQ1 from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INP | power_in | Boost converter input power supply pin, 2.7V to 5.5V operating range |
| 2 | PGND | power_in | Power ground pin |
| 3 | PGND | power_in | Power ground pin |
| 4 | VIN | power_in | Control supply input, operating voltage range 2.7V to 5.5V |
| 5 | INN | power_in | Inverting converter input power supply pin, 2.7V to 5.5V operating range |
| 6 | INN | power_in | Inverting converter input power supply pin, 2.7V to 5.5V operating range |
| 7 | BSW | output | Gate-control pin for external battery switch PMOS, goes low when ENP is set high |
| 8 | ENP | input | Enable pin for positive-output voltage, 0V disabled and VIN enabled |
| 9 | PSP | input | Power-save mode enable for boost converter stage, 0V disabled and VIN enabled |
| 10 | ENN | input | Enable pin for negative-output voltage, 0V disabled and VIN enabled |
| 11 | PSN | input | Power-save mode enable for inverter stage, 0V disabled and VIN enabled |
| 12 | NC | unconnected | No internal connection |
| 13 | OUTN | bidirectional | Inverting converter switch output, provides negative output voltage VNEG |
| 14 | OUTN | bidirectional | Inverting converter switch output, provides negative output voltage VNEG |
| 15 | VNEG | input | Negative-output voltage-sense input for feedback divider |
| 16 | FBN | input | Feedback pin for negative-output voltage divider, nominal voltage 0V |
| 17 | VREF | power_in | Reference output voltage 1.213V, bypass with 220nF capacitor to ground |
| 18 | CN | bidirectional | Compensation pin for inverting converter control, requires external capacitor |
| 19 | AGND | power_in | Analog ground pin, reference for control circuits |
| 20 | NC | unconnected | No internal connection |
| 21 | CP | bidirectional | Compensation pin for boost converter control, requires external capacitor |
| 22 | FBP | input | Feedback pin for positive-output voltage divider, nominal voltage 1.213V |
| 23 | VPOS | input | Positive-output voltage-sense input for feedback divider |
| 24 | INP | power_in | Boost converter input power supply pin, 2.7V to 5.5V operating range |
| 25 | Thermal Pad | power_in | Thermal pad for thermal performance, connect to PGND |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
TPS65131TRGERQ1 - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
tps65131trgerq1-etched.step/tps65131trgerq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65131trgerq1.step/tps65131trgerq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
efe07626c61b9749, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).