← Commit history

Initial commit: component/tps650532rger

Ray ·988840fb07 ·
2 files changed +304
README.mdadded+61
@@ -0,0 +1,61 @@+# TPS650532RGER++**Texas Instruments** · DC-DC Converters · VQFN-24-EP(4x4)++TPS650532RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Power supply for digital and analog circuitry; must be connected to the same voltage supply as VINDCDC1/2. |+| 2 | VINLDO1 | power_in | Input voltage for LDO1; recommended operating range 1.5 V to 6.5 V. |+| 3 | VLDO1 | power_out | Output voltage of LDO1; externally adjustable from 1 V to 3.6 V with maximum output current of 400 mA. |+| 4 | FB_LDO1 | input | Feedback input for external voltage divider to adjust VLDO1 output voltage. |+| 5 | THRESHOLD | input | Reset threshold input; voltage exceeding 1 V triggers 100 ms delayed reset pulse. |+| 6 | FB_LDO2 | input | Feedback input for external voltage divider to adjust VLDO2 output voltage. |+| 7 | VLDO2 | power_out | Output voltage of LDO2; externally adjustable from 1 V to 3.6 V with maximum output current of 200 mA. |+| 8 | VINLDO2/3 | power_in | Input voltage for LDO2 and LDO3; recommended operating range 1.5 V to 6.5 V. |+| 9 | VLDO3 | power_out | Output voltage of LDO3; fixed at 1.5 V for TPS650532 variant with maximum output current of 200 mA. |+| 10 | RESET | tri_state | Open-drain active-low reset output with 100 ms reset delay time and 1 mA sink current capability. |+| 11 | EN_LDO2 | input | Enable input for LDO2; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |+| 12 | EN_LDO3 | input | Enable input for LDO3; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |+| 13 | FB_DCDC2 | input | Feedback input to adjust output voltage of DCDC2 between 0.6 V and VIN using external resistor divider. |+| 14 | PGND2 | power_in | Ground pin for converter 2; connect to AGND, PowerPAD, and main ground plane. |+| 15 | L2 | output | Switch pin of converter 2 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 2. |+| 16 | VINDCDC1/2 | power_in | Input voltage for DCDC1 and DCDC2 step-down converters; range 2.5 V to 6 V; must be connected to same supply as VCC. |+| 17 | L1 | output | Switch pin of converter 1 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 1. |+| 18 | PGND1 | power_in | Ground pin for converter 1; connect to AGND, PowerPAD, and main ground plane. |+| 19 | FB_DCDC1 | input | Feedback input to adjust output voltage of DCDC1 between 0.6 V and VIN using external resistor divider. |+| 20 | EN_DCDC1 | input | Enable input for converter 1; active high enables DC-DC conversion with soft start. |+| 21 | EN_DCDC2 | input | Enable input for converter 2; active high enables DC-DC conversion with soft start. |+| 22 | EN_LDO1 | input | Enable input for LDO1; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor. |+| 23 | MODE | input | Mode selection pin for both converters; low selects Power Save Mode with PFM at light loads, high selects forced PWM mode. |+| 24 | AGND | power_in | Analog ground; connect to PGND1, PGND2, PowerPAD, and main ground plane. |+| 25 | PowerPAD | power_in | Exposed thermal pad for thermal dissipation and ground connection; must be soldered to PCB ground plane. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TPS650532RGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps650532rger-etched.step` / `tps650532rger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps650532rger.step` / `tps650532rger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps65053) (38 pp, sha256 `15a78f62021d882e`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps650532rger-datasheet.pdf)
page.jsonadded+243
@@ -0,0 +1,243 @@+{+  "slug": "tps650532rger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps650532rger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps650532rger.kicad_sym",+    "tps650532rger.kicad_mod",+    "tps650532rger.glb",+    "tps650532rger.step",+    "tps650532rger.lbr",+    "docs/hero.png",+    "docs/tps650532rger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS650532RGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65053",+    "parts": {+      "symbol": "tps650532rger.kicad_sym",+      "footprint": "tps650532rger.kicad_mod",+      "model_3d": "tps650532rger-etched.glb",+      "model_3d_plain": "tps650532rger.glb",+      "model_3d_step": "tps650532rger-etched.step",+      "model_3d_step_plain": "tps650532rger.step",+      "lbr": "tps650532rger.lbr"+    },+    "distributor_links": {+      "lcsc": "C544318"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply for digital and analog circuitry; must be connected to the same voltage supply as VINDCDC1/2."+      },+      {+        "number": "2",+        "name": "VINLDO1",+        "type": "power_in",+        "description": "Input voltage for LDO1; recommended operating range 1.5 V to 6.5 V."+      },+      {+        "number": "3",+        "name": "VLDO1",+        "type": "power_out",+        "description": "Output voltage of LDO1; externally adjustable from 1 V to 3.6 V with maximum output current of 400 mA."+      },+      {+        "number": "4",+        "name": "FB_LDO1",+        "type": "input",+        "description": "Feedback input for external voltage divider to adjust VLDO1 output voltage."+      },+      {+        "number": "5",+        "name": "THRESHOLD",+        "type": "input",+        "description": "Reset threshold input; voltage exceeding 1 V triggers 100 ms delayed reset pulse."+      },+      {+        "number": "6",+        "name": "FB_LDO2",+        "type": "input",+        "description": "Feedback input for external voltage divider to adjust VLDO2 output voltage."+      },+      {+        "number": "7",+        "name": "VLDO2",+        "type": "power_out",+        "description": "Output voltage of LDO2; externally adjustable from 1 V to 3.6 V with maximum output current of 200 mA."+      },+      {+        "number": "8",+        "name": "VINLDO2/3",+        "type": "power_in",+        "description": "Input voltage for LDO2 and LDO3; recommended operating range 1.5 V to 6.5 V."+      },+      {+        "number": "9",+        "name": "VLDO3",+        "type": "power_out",+        "description": "Output voltage of LDO3; fixed at 1.5 V for TPS650532 variant with maximum output current of 200 mA."+      },+      {+        "number": "10",+        "name": "RESET",+        "type": "tri_state",+        "description": "Open-drain active-low reset output with 100 ms reset delay time and 1 mA sink current capability."+      },+      {+        "number": "11",+        "name": "EN_LDO2",+        "type": "input",+        "description": "Enable input for LDO2; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor."+      },+      {+        "number": "12",+        "name": "EN_LDO3",+        "type": "input",+        "description": "Enable input for LDO3; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor."+      },+      {+        "number": "13",+        "name": "FB_DCDC2",+        "type": "input",+        "description": "Feedback input to adjust output voltage of DCDC2 between 0.6 V and VIN using external resistor divider."+      },+      {+        "number": "14",+        "name": "PGND2",+        "type": "power_in",+        "description": "Ground pin for converter 2; connect to AGND, PowerPAD, and main ground plane."+      },+      {+        "number": "15",+        "name": "L2",+        "type": "output",+        "description": "Switch pin of converter 2 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 2."+      },+      {+        "number": "16",+        "name": "VINDCDC1/2",+        "type": "power_in",+        "description": "Input voltage for DCDC1 and DCDC2 step-down converters; range 2.5 V to 6 V; must be connected to same supply as VCC."+      },+      {+        "number": "17",+        "name": "L1",+        "type": "output",+        "description": "Switch pin of converter 1 operating at 2.25 MHz; connected to external inductor (1.5 μH to 2.2 μH) for DC-DC converter 1."+      },+      {+        "number": "18",+        "name": "PGND1",+        "type": "power_in",+        "description": "Ground pin for converter 1; connect to AGND, PowerPAD, and main ground plane."+      },+      {+        "number": "19",+        "name": "FB_DCDC1",+        "type": "input",+        "description": "Feedback input to adjust output voltage of DCDC1 between 0.6 V and VIN using external resistor divider."+      },+      {+        "number": "20",+        "name": "EN_DCDC1",+        "type": "input",+        "description": "Enable input for converter 1; active high enables DC-DC conversion with soft start."+      },+      {+        "number": "21",+        "name": "EN_DCDC2",+        "type": "input",+        "description": "Enable input for converter 2; active high enables DC-DC conversion with soft start."+      },+      {+        "number": "22",+        "name": "EN_LDO1",+        "type": "input",+        "description": "Enable input for LDO1; logic high enables the LDO, logic low disables and discharges output via 350 Ω resistor."+      },+      {+        "number": "23",+        "name": "MODE",+        "type": "input",+        "description": "Mode selection pin for both converters; low selects Power Save Mode with PFM at light loads, high selects forced PWM mode."+      },+      {+        "number": "24",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground; connect to PGND1, PGND2, PowerPAD, and main ground plane."+      },+      {+        "number": "25",+        "name": "PowerPAD",+        "type": "power_in",+        "description": "Exposed thermal pad for thermal dissipation and ground connection; must be soldered to PCB ground plane."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 38,+        "cost_usd": 0.4522,+        "at": "2026-09-24T08:02:27"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps65053",+        "pages": 38,+        "sha256": "15a78f62021d882e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file