TPS62A02APDDCR

{
  "slug": "tps62a02apddcr",
  "version": "0.1.0",
  "type": "component",
  "description": "TEXAS INSTRUMENTS Global Sourcing Parts, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tps62a02apddcr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps62a02apddcr.kicad_sym",
    "tps62a02apddcr.kicad_mod",
    "tps62a02apddcr.glb",
    "tps62a02apddcr.step",
    "tps62a02apddcr.lbr",
    "docs/hero.png",
    "docs/tps62a02apddcr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps62a02apddcr-hero.glb",
    "tps62a02apddcr-hero.overlay.json",
    "tps62a02apddcr-etched.glb"
  ],
  "component": {
    "mpn": "TPS62A02APDDCR",
    "manufacturer": "TEXAS INSTRUMENTS",
    "package": "TSOT-23-6",
    "pin_count": 6,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/tps62a02a.pdf?ts=1736928951778&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D13%2526searchTerm%253DTPS62A02APDDCR",
    "parts": {
      "symbol": "tps62a02apddcr.kicad_sym",
      "footprint": "tps62a02apddcr.kicad_mod",
      "model_3d": "tps62a02apddcr-hero.glb",
      "model_3d_plain": "tps62a02apddcr-etched.glb",
      "model_3d_step": "tps62a02apddcr-etched.step",
      "model_3d_step_plain": "tps62a02apddcr.step",
      "lbr": "tps62a02apddcr.lbr"
    },
    "distributor_links": {
      "lcsc": "C25687169",
      "digikey": "296-TPS62A02APDDCRTR-ND",
      "mouser": "595-TPS62A02APDDCR"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T00:54:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS62A02APDDCRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS62A02APDDCR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Device enable logic input: logic high enables the device, logic low disables it and puts it into shutdown, and the pin must not be left floating."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "output",
        "description": "Switch pin connected to the internal FET switches and inductor terminal; the output filter inductor connects to this pin."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage pin, specified for 2.5 V to 5.5 V; the input capacitor should be placed as close as possible between VIN and GND."
      },
      {
        "number": "5",
        "name": "PG",
        "type": "output",
        "description": "Power-good open-drain output; the pullup resistor cannot be connected to any voltage higher than 5.5 V, and if unused the pin can be left open or connected to GND."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for the internal control loop, to be connected to an external feedback divider that sets the output from 0.6 V up to VIN."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 5 is PG for the non-N TPS62A02A part. The datasheet lists OUT (output voltage sense) for pin 5 o; The FB output range of 0.6 V to VIN is taken from the Recommended Operating Conditions (VOUT range),"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0608,
        "at": "2026-10-18T00:52:13"
      },
      "datasheet": {
        "url": "https://www.ti.com.cn/cn/lit/ds/symlink/tps62a02a.pdf?ts=1736928951778&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D13%2526searchTerm%253DTPS62A02APDDCR",
        "pages": 31,
        "sha256": "872cff1ae849dba0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps62a02apddcr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps62a02apddcr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1e1b4d35c343cd472737a6dd6dbc9cd69ef6ce36e82ab2aaf5c91a9957668694",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}