main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps62933drlr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps62933drlr-etched.glb tps62933drlr: factory component page (tier=mfr) · Ray
tps62933drlr-etched.step tps62933drlr: factory component page (tier=mfr) · Ray
tps62933drlr-hero.glb tps62933drlr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps62933drlr-hero.overlay.json tps62933drlr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps62933drlr.glb Publish 0.1.0 · Ray
tps62933drlr.kicad_mod Publish 0.1.0 · Ray
tps62933drlr.kicad_sym Publish 0.1.0 · Ray
tps62933drlr.lbr Publish 0.1.0 · Ray
tps62933drlr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TPS62933DRLR

Texas Instruments · DC-DC Converters · SOT-583

TPS62933DRLR from Texas Instruments, in a SOT-583. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 RT input Frequency programming input: float for 500 kHz, tie to GND for 1.2 MHz, or connect a timing resistor to set 200 kHz to 2.2 MHz.
2 EN input Enable input; driving EN high or leaving it floating enables the converter, and an external resistor divider can set an adjustable VIN UVLO.
3 VIN power_in Supply input to the internal LDO and high-side FET; input bypass capacitors must connect directly to this pin and GND, with a 3.8-V to 30-V recommended input range.
4 GND power_in Ground pin connected to the low-side FET source and controller ground; the path to CIN must be as short as possible.
5 SW output Switching output connected to the power inductor, internally tied to the high-side FET source and low-side FET drain; recommended DC range is -0.1 V to 30 V.
6 BST passive Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100-nF ceramic capacitor from this pin to SW.
7 SS input Soft-start control pin for this variant; a minimum 6.8-nF ceramic capacitor sets the minimum soft-start time to approximately 1 ms, and the pin must not float.
8 FB input Output feedback input; connect to the tap of an external resistor divider from the output to GND to set the output voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-583
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN -0.3 32 V 5
EN voltage EN -0.3 6 V 5
FB voltage FB -0.3 6 V 5
SW DC voltage SW -0.3 32 V DC 5
SW transient voltage SW -3 33 V transient < 10 ns 5
BST voltage BST -0.3 V max printed as SW + 6 5
BST-SW voltage BST-SW -0.3 6 V 5
SS/PG voltage SS/PG -0.3 6 V 5
RT voltage RT -0.3 6 V 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input voltage VIN 3.8 30 V 5
EN voltage EN -0.1 5.5 V 5
FB voltage FB -0.1 5.5 V 5
PG voltage PG -0.1 5.5 V 5
Output voltage VOUT 0.8 22 V 5
SW DC voltage SW -0.1 30 V DC 5
SW transient voltage SW -3 32 V transient < 10 ns 5
BST voltage BST -0.1 V max printed as SW + 5.5 5
BST-SW voltage BST-SW -0.1 5.5 V 5
Output current IOUT 0 3 A TPS62933, TPS62933x 5
Operating junction temperature TJ -40 150 °C 5
Junction-to-ambient thermal resistance RθJA 112.2 °C/W JEDEC board, DRL (SOT583) 8 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 29.1 °C/W DRL (SOT583) 8 pins 6
Junction-to-ambient thermal resistance on official EVM board RθJA_EVM 60.2 °C/W official EVM board, 2 layer, 2-oz copper 6
VIN operation input voltage VIN 3.8 30 V 6
Input undervoltage lockout rising threshold VIN_UVLO 3.4 3.6 3.8 V Rising threshold 6
Input undervoltage lockout falling threshold VIN_UVLO 3.1 3.3 3.5 V Falling threshold 6
Input undervoltage lockout hysteresis VIN_UVLO 300 mV Hysteresis 6
Nonswitching quiescent current IQ 12 µA EN = 5 V, VFB = 0.85 V, TPS62932, TPS62933, TPS62933P 6
Shutdown supply current ISHDN 2 µA VEN = 0 V 6
Enable threshold rising VEN_RISE 1.21 1.28 V Rising enable threshold 6
Disable threshold falling VEN_FALL 1.1 1.17 V Falling disable threshold 6
FB voltage VFB 792 800 808 mV TJ = 25°C 6
FB voltage VFB 788 800 812 mV TJ = 0°C to 85°C 6
FB voltage VFB 784 800 816 mV TJ = -40°C to 150°C 6
FB input leakage current IFB 0.15 µA VFB = 0.8 V 6
High-side MOSFET on-resistance RDSON_HS 76 mΩ TJ = 25°C, VBST - SW = 5 V 6
Low-side MOSFET on-resistance RDSON_LS 32 mΩ TJ = 25°C 6
High-side MOSFET current limit IHS_LIMIT 4.2 5 5.8 A TPS62933 and TPS62933x 6
Low-side MOSFET current limit ILS_LIMIT 2.9 3.8 4.5 A TPS62933 and TPS62933x 7
Minimum peak inductor current IPEAK_MIN 0.75 A TPS62933, TPS62933P, and TPS62933O 7
Soft-start charge current ISS 4.5 5.5 6.5 µA TPS62932, TPS62933, and TPS62933F 7
Switching center frequency fSW 450 500 550 kHz RT = floating 7
Switching center frequency fSW 1000 1200 1350 kHz RT = GND 7
Switching frequency with timing resistor fSW 310 kHz RT = 71.5 kΩ 7
Switching frequency with timing resistor fSW 2100 kHz RT = 9.09 kΩ 7
Minimum ON pulse width tON_MIN 70 ns 7
Minimum OFF pulse width tOFF_MIN 140 ns 7
Maximum ON pulse width tON_MAX 7 µs 7
Output OVP threshold VOVP 112 115 118 % OVP detect (L→H) 7
Output OVP hysteresis VOVP 5 % Hysteresis 7
Output UVP threshold VUVP 65 % UVP detect (H→L) 7
UV hiccup ON time thiccup_ON 256 µs before entering hiccup mode after soft start ends 7
Thermal shutdown threshold TSHDN 165 °C Shutdown temperature 7
Thermal shutdown hysteresis THYS 30 °C Hysteresis 7
Internal spread oscillator frequency fspread -6 6 % ±6% 8

CAD (Adom-generated)

  • Symbol: TPS62933DRLR
  • Footprint: Adom_Gen:Texas_Instruments_TPS62933_f27935
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tps62933drlr-etched.step / tps62933drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62933drlr.step / tps62933drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 16ec2eac43c7374e, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF