Generated by kicad-footprint-generator · KiCad file format 20260206
TPS62823DLCR
Texas Instruments · DC-DC Converters · VSON-8(1.5x2)
TPS62823DLCR from Texas Instruments, in a VSON-8(1.5x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input (High=Enabled, Low=Disabled). Do not leave floating. |
| 2 | FB | input | Output voltage feedback. Connect resistive voltage divider to this pin. |
| 3 | AGND | power_in | Signal ground. Internally connected to the PGND pin. Can be left floating. |
| 4 | NC | unconnected | Internally not connected. Can be connected to VOUT, GND or left floating. |
| 5 | PGND | power_in | Power ground |
| 6 | SW | passive | Switch node, connected to the internal MOSFET switches. |
| 7 | VIN | power_in | Supply voltage |
| 8 | PG | output | Power good output. If unused, leave floating or connect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-8(1.5x2) |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input Voltage range | VIN | 2.4 | 5.5 | V | 5 | ||
| Operating Quiescent Current | IQ | 4 | 10 | µA | EN=High, IOUT=0A, device not switching | 5 | |
| Shutdown Current | ISD | 0.05 | 0.5 | µA | EN=Low, TJ = -40°C to 85°C | 5 | |
| Undervoltage Threshold Falling Input Voltage | VUVLO | 2.1 | 2.2 | 2.3 | V | Falling Input Voltage | 5 |
| Input Leakage Current (EN, PG) | ILKG | 10 | 100 | nA | EN = High, VPG = 5V | 5 | |
| Power Good Lower Threshold Voltage, rising | VPGTL | 94 | 96 | 98 | % | Rising (VFB vs regulation target) | 5 |
| Power Good Lower Threshold Voltage, falling | VPGTL | 90 | 92 | 94 | % | Falling (VFB vs regulation target) | 5 |
| Power Good Upper Threshold Voltage, rising | VPGTH | 108 | 110 | 112 | % | Rising (VFB vs regulation target) | 5 |
| Power Good Upper Threshold Voltage, falling | VPGTH | 103 | 105 | 107 | % | Falling (VFB vs regulation target) | 5 |
| Power Good Logic Low Level Output Voltage | VPGL | 0.4 | V | IPG = -1mA | 5 | ||
| High-Side FET Current Limit (TPS62823) | ILIM | 3.7 | 4.3 | 5 | A | 5 | |
| Input Leakage Current (FB) | ILKG_FB | 10 | 50 | nA | EN=High, VFB=0.6V | 5 | |
| Feedback Voltage Accuracy | VFB | 594 | 600 | 606 | mV | PWM Mode | 5 |
| Output Discharge Current | IDIS | 75 | 400 | mA | EN=Low, VSW = 0.4V | 5 | |
| Input Voltage range (recommended) | VIN | 2.4 | 5.5 | V | 4 | ||
| Output Voltage Range | VOUT | 0.6 | 4 | V | 4 | ||
| Maximum Output Current (TPS62823) | IOUT | 3 | A | TPS62823 | 4 | ||
| Operating Junction Temperature (recommended) | TJ | -40 | 125 | °C | 4 | ||
| Pin Voltage Range VIN, FB, EN, PG, NC | -0.3 | 6 | V | 4 | |||
| Pin Voltage Range SW (DC) | -0.3 | V | max printed as VIN + 0.3 | 4 | |||
| Pin Voltage Range SW (DC, in current limit) | -1 | V | 4 | ||||
| Pin Voltage Range SW (AC) | -2.5 | 10 | V | less than 10ns | 4 | ||
| Power Good Sink Current | 1 | mA | 4 | ||||
| Operating Junction Temperature Range (absolute) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Undervoltage Hysteresis | 160 | mV | 5 | ||||
| Thermal Shutdown Threshold | TSD | 150 | °C | Rising Junction Temperature | 5 | ||
| Thermal Shutdown Hysteresis | 20 | °C | 5 | ||||
| High-Level Threshold Voltage (EN) | VH | 1 | V | 5 | |||
| Low-Level Threshold Voltage (EN) | VL | 0.4 | V | 5 | |||
| Soft-Start Time | tSS | 1.25 | ms | Time from EN=High to 95% of VOUT nominal | 5 | ||
| Power Good delay, rising | tPGD | 100 | µs | rising | 5 | ||
| Power Good delay, falling | tPGD | 20 | µs | falling | 5 | ||
| Switching Frequency | FSW | 2.2 | MHz | PWM Mode Operation | 5 | ||
| High-Side FET ON-Resistance (TPS62823) | RDS(on) | 26 | mΩ | 5 | |||
| Low-Side FET ON-Resistance (TPS62821/2/3) | RDS(on) | 25 | mΩ | 5 | |||
| DC Load Regulation | 0.2 | %/A | PWM Mode Operation | 5 | |||
| DC Line Regulation | 0.05 | %/V | PWM Mode Operation | 5 | |||
| Junction-to-ambient thermal resistance (JEDEC PCB) | RθJA | 114.1 | °C/W | JEDEC PCB | 4 | ||
| Junction-to-ambient thermal resistance (EVM) | RθJA | 69.9 | °C/W | TPS6282xEVM-005 | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 90.2 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 43.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter (JEDEC PCB) | ψJT | 6.6 | °C/W | JEDEC PCB | 4 | ||
| Junction-to-top characterization parameter (EVM) | ψJT | 4.3 | °C/W | TPS6282xEVM-005 | 4 | ||
| Junction-to-board characterization parameter (JEDEC PCB) | ψJB | 43.7 | °C/W | JEDEC PCB | 4 | ||
| Junction-to-board characterization parameter (EVM) | ψJB | 44.2 | °C/W | TPS6282xEVM-005 | 4 |
CAD (KiCad official)
- Symbol:
TPS62823DLCR - Footprint:
Package_SON:VSON-8_1.5x2mm_P0.5mm - 3D model: VSON-8(1.5x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps62823dlcr-etched.step/tps62823dlcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62823dlcr.step/tps62823dlcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
68d4e1472bb48694, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).