Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS62823DLCR

Texas Instruments · DC-DC Converters · VSON-8(1.5x2)

TPS62823DLCR from Texas Instruments, in a VSON-8(1.5x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input (High=Enabled, Low=Disabled). Do not leave floating.
2 FB input Output voltage feedback. Connect resistive voltage divider to this pin.
3 AGND power_in Signal ground. Internally connected to the PGND pin. Can be left floating.
4 NC unconnected Internally not connected. Can be connected to VOUT, GND or left floating.
5 PGND power_in Power ground
6 SW passive Switch node, connected to the internal MOSFET switches.
7 VIN power_in Supply voltage
8 PG output Power good output. If unused, leave floating or connect to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSON-8(1.5x2)
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input Voltage range VIN 2.4 5.5 V 5
Operating Quiescent Current IQ 4 10 µA EN=High, IOUT=0A, device not switching 5
Shutdown Current ISD 0.05 0.5 µA EN=Low, TJ = -40°C to 85°C 5
Undervoltage Threshold Falling Input Voltage VUVLO 2.1 2.2 2.3 V Falling Input Voltage 5
Input Leakage Current (EN, PG) ILKG 10 100 nA EN = High, VPG = 5V 5
Power Good Lower Threshold Voltage, rising VPGTL 94 96 98 % Rising (VFB vs regulation target) 5
Power Good Lower Threshold Voltage, falling VPGTL 90 92 94 % Falling (VFB vs regulation target) 5
Power Good Upper Threshold Voltage, rising VPGTH 108 110 112 % Rising (VFB vs regulation target) 5
Power Good Upper Threshold Voltage, falling VPGTH 103 105 107 % Falling (VFB vs regulation target) 5
Power Good Logic Low Level Output Voltage VPGL 0.4 V IPG = -1mA 5
High-Side FET Current Limit (TPS62823) ILIM 3.7 4.3 5 A 5
Input Leakage Current (FB) ILKG_FB 10 50 nA EN=High, VFB=0.6V 5
Feedback Voltage Accuracy VFB 594 600 606 mV PWM Mode 5
Output Discharge Current IDIS 75 400 mA EN=Low, VSW = 0.4V 5
Input Voltage range (recommended) VIN 2.4 5.5 V 4
Output Voltage Range VOUT 0.6 4 V 4
Maximum Output Current (TPS62823) IOUT 3 A TPS62823 4
Operating Junction Temperature (recommended) TJ -40 125 °C 4
Pin Voltage Range VIN, FB, EN, PG, NC -0.3 6 V 4
Pin Voltage Range SW (DC) -0.3 V max printed as VIN + 0.3 4
Pin Voltage Range SW (DC, in current limit) -1 V 4
Pin Voltage Range SW (AC) -2.5 10 V less than 10ns 4
Power Good Sink Current 1 mA 4
Operating Junction Temperature Range (absolute) TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Undervoltage Hysteresis 160 mV 5
Thermal Shutdown Threshold TSD 150 °C Rising Junction Temperature 5
Thermal Shutdown Hysteresis 20 °C 5
High-Level Threshold Voltage (EN) VH 1 V 5
Low-Level Threshold Voltage (EN) VL 0.4 V 5
Soft-Start Time tSS 1.25 ms Time from EN=High to 95% of VOUT nominal 5
Power Good delay, rising tPGD 100 µs rising 5
Power Good delay, falling tPGD 20 µs falling 5
Switching Frequency FSW 2.2 MHz PWM Mode Operation 5
High-Side FET ON-Resistance (TPS62823) RDS(on) 26 mΩ 5
Low-Side FET ON-Resistance (TPS62821/2/3) RDS(on) 25 mΩ 5
DC Load Regulation 0.2 %/A PWM Mode Operation 5
DC Line Regulation 0.05 %/V PWM Mode Operation 5
Junction-to-ambient thermal resistance (JEDEC PCB) RθJA 114.1 °C/W JEDEC PCB 4
Junction-to-ambient thermal resistance (EVM) RθJA 69.9 °C/W TPS6282xEVM-005 4
Junction-to-case (top) thermal resistance RθJC(top) 90.2 °C/W 4
Junction-to-board thermal resistance RθJB 43.4 °C/W 4
Junction-to-top characterization parameter (JEDEC PCB) ψJT 6.6 °C/W JEDEC PCB 4
Junction-to-top characterization parameter (EVM) ψJT 4.3 °C/W TPS6282xEVM-005 4
Junction-to-board characterization parameter (JEDEC PCB) ψJB 43.7 °C/W JEDEC PCB 4
Junction-to-board characterization parameter (EVM) ψJB 44.2 °C/W TPS6282xEVM-005 4

CAD (KiCad official)

  • Symbol: TPS62823DLCR
  • Footprint: Package_SON:VSON-8_1.5x2mm_P0.5mm
  • 3D model: VSON-8(1.5x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps62823dlcr-etched.step / tps62823dlcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62823dlcr.step / tps62823dlcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 68d4e1472bb48694, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF