main
History Download
Ray Publish 0.1.0 540f9c7

TPS62207DBVR

Texas Instruments · DC-DC Converters · SOT-23-5

TPS62207DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VI power_in Supply voltage pin; recommended supply range is 2.5 V to 6.0 V and the absolute maximum supply voltage is 7.0 V.
2 GND power_in Ground pin, the network ground reference for the device.
3 EN input Enable pin: pulling it to ground forces shutdown, pulling it to VI enables the device, and it must not be left floating and must be terminated.
4 FB input Feedback pin: connect directly to the output for the fixed-output-voltage version, or to an external resistor divider for the adjustable version (internal divider disabled); voltages on FB are limited to -0.3 V to VCC + 0.3 V.
5 SW bidirectional Switch pin connected to the internal MOSFET switches; the inductor connects to this pin, and voltages on SW are limited to -0.3 V to VCC + 0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VI 2.5 6 V 5
Operating quiescent current IQ 15 30 µA IO = 0 mA, Device is not switching 5
Shutdown supply current 0.1 1 µA EN = GND 5
Undervoltage lockout threshold 1.5 2 V 5
EN high level input voltage 1.3 V 5
EN low level input voltage V(EN) 0.4 V 5
EN input bias current I(EN) 0.01 0.1 µA EN = GND or VIN 5
P-channel MOSFET on-resistance rds(ON) 530 690 mΩ VIN = VGS = 3.6 V 5
P-channel MOSFET on-resistance rds(ON) 670 850 mΩ VIN = VGS = 2.5 V 5
N-channel MOSFET on-resistance rds(ON) 430 540 mΩ VIN = VGS = 3.6 V 5
N-channel MOSFET on-resistance rds(ON) 530 660 mΩ VIN = VGS = 2.5 V 5
P-channel leakage current Ilkg_(P) 0.1 1 µA VDS = 6.0 V 5
N-channel leakage current Ilkg_(N) 0.1 1 µA VDS = 6.0 V 5
P-channel current limit I(LIM) 380 480 670 mA 2.5 V < Vin < 6.0 V 5
Switching frequency fS 650 1000 1500 kHz 5
Fixed output voltage accuracy, 1.2 V version (TPS62207) VO 0 3 % VI = 2.5 V to 6 V, IO = 0 mA 5
Fixed output voltage accuracy, 1.2 V version (TPS62207) VO -3 3 % VI = 2.5 V to 6 V, 0 mA ≤ IO ≤ 300 mA 5
Line regulation 0.26 %/V VI = 2.5 V to 6 V, IO = 10 mA 5
Load regulation 0.0014 %/mA IO = 100 mA to 300 mA 5
Leakage current into SW pin Ilkg 0.1 1 µA Vin > Vout, 0 V ≤ Vsw ≤ Vin 5
Reverse leakage current into pin SW Ilkg(Rev) 0.1 1 µA Vin = open, EN = GND, VSW = 6 V 5
Supply voltage VI 2.5 6 V 4
Output current IO 300 mA 4
Inductor L 4.7 10 µH 4
Input capacitor CI 4.7 µF 4
Output capacitor CO 10 µF 4
Operating ambient temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Supply voltages VI -0.3 7 V 3
Voltages on pins SW, EN, FB -0.3 V Maximum printed as VCC + 0.3 V 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
Junction-to-ambient thermal resistance RθJA 220 °C/W DBV [SOT-23] 5-pin 4
Junction-to-case (top) thermal resistance RθJC(top) 125 °C/W DBV [SOT-23] 5-pin 4
Junction-to-board thermal resistance RθJB 36 °C/W DBV [SOT-23] 5-pin 4
Junction-to-top characterization parameter ψJT 14 °C/W DBV [SOT-23] 5-pin 4
Junction-to-board characterization parameter ψJB 35 °C/W DBV [SOT-23] 5-pin 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS62207DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps62207dbvr-etched.step / tps62207dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62207dbvr.step / tps62207dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f6ac7e529beda007, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF