3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS62207DBVR
Texas Instruments · DC-DC Converters · SOT-23-5
TPS62207DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VI | power_in | Supply voltage pin; recommended supply range is 2.5 V to 6.0 V and the absolute maximum supply voltage is 7.0 V. |
| 2 | GND | power_in | Ground pin, the network ground reference for the device. |
| 3 | EN | input | Enable pin: pulling it to ground forces shutdown, pulling it to VI enables the device, and it must not be left floating and must be terminated. |
| 4 | FB | input | Feedback pin: connect directly to the output for the fixed-output-voltage version, or to an external resistor divider for the adjustable version (internal divider disabled); voltages on FB are limited to -0.3 V to VCC + 0.3 V. |
| 5 | SW | bidirectional | Switch pin connected to the internal MOSFET switches; the inductor connects to this pin, and voltages on SW are limited to -0.3 V to VCC + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | 2.5 | 6 | V | 5 | ||
| Operating quiescent current | IQ | 15 | 30 | µA | IO = 0 mA, Device is not switching | 5 | |
| Shutdown supply current | 0.1 | 1 | µA | EN = GND | 5 | ||
| Undervoltage lockout threshold | 1.5 | 2 | V | 5 | |||
| EN high level input voltage | 1.3 | V | 5 | ||||
| EN low level input voltage | V(EN) | 0.4 | V | 5 | |||
| EN input bias current | I(EN) | 0.01 | 0.1 | µA | EN = GND or VIN | 5 | |
| P-channel MOSFET on-resistance | rds(ON) | 530 | 690 | mΩ | VIN = VGS = 3.6 V | 5 | |
| P-channel MOSFET on-resistance | rds(ON) | 670 | 850 | mΩ | VIN = VGS = 2.5 V | 5 | |
| N-channel MOSFET on-resistance | rds(ON) | 430 | 540 | mΩ | VIN = VGS = 3.6 V | 5 | |
| N-channel MOSFET on-resistance | rds(ON) | 530 | 660 | mΩ | VIN = VGS = 2.5 V | 5 | |
| P-channel leakage current | Ilkg_(P) | 0.1 | 1 | µA | VDS = 6.0 V | 5 | |
| N-channel leakage current | Ilkg_(N) | 0.1 | 1 | µA | VDS = 6.0 V | 5 | |
| P-channel current limit | I(LIM) | 380 | 480 | 670 | mA | 2.5 V < Vin < 6.0 V | 5 |
| Switching frequency | fS | 650 | 1000 | 1500 | kHz | 5 | |
| Fixed output voltage accuracy, 1.2 V version (TPS62207) | VO | 0 | 3 | % | VI = 2.5 V to 6 V, IO = 0 mA | 5 | |
| Fixed output voltage accuracy, 1.2 V version (TPS62207) | VO | -3 | 3 | % | VI = 2.5 V to 6 V, 0 mA ≤ IO ≤ 300 mA | 5 | |
| Line regulation | 0.26 | %/V | VI = 2.5 V to 6 V, IO = 10 mA | 5 | |||
| Load regulation | 0.0014 | %/mA | IO = 100 mA to 300 mA | 5 | |||
| Leakage current into SW pin | Ilkg | 0.1 | 1 | µA | Vin > Vout, 0 V ≤ Vsw ≤ Vin | 5 | |
| Reverse leakage current into pin SW | Ilkg(Rev) | 0.1 | 1 | µA | Vin = open, EN = GND, VSW = 6 V | 5 | |
| Supply voltage | VI | 2.5 | 6 | V | 4 | ||
| Output current | IO | 300 | mA | 4 | |||
| Inductor | L | 4.7 | 10 | µH | 4 | ||
| Input capacitor | CI | 4.7 | µF | 4 | |||
| Output capacitor | CO | 10 | µF | 4 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Supply voltages | VI | -0.3 | 7 | V | 3 | ||
| Voltages on pins SW, EN, FB | -0.3 | V | Maximum printed as VCC + 0.3 V | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance | RθJA | 220 | °C/W | DBV [SOT-23] 5-pin | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 125 | °C/W | DBV [SOT-23] 5-pin | 4 | ||
| Junction-to-board thermal resistance | RθJB | 36 | °C/W | DBV [SOT-23] 5-pin | 4 | ||
| Junction-to-top characterization parameter | ψJT | 14 | °C/W | DBV [SOT-23] 5-pin | 4 | ||
| Junction-to-board characterization parameter | ψJB | 35 | °C/W | DBV [SOT-23] 5-pin | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS62207DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps62207dbvr-etched.step/tps62207dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62207dbvr.step/tps62207dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f6ac7e529beda007, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).