main
Ray tps62162qdsgtq1: specified limits as data (metadata.characteristics, 29 rows from the datasheet) 96654ed

TPS62162QDSGTQ1

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TPS62162QDSGTQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground with voltage rating -0.3 to 20 V.
2 VIN power_in Supply voltage input rated 3 V to 17 V operating range.
3 EN input Enable input with internal 400 kΩ pull-down; High = enabled, Low = disabled; logic thresholds VEN_H = 0.9 V, VEN_L = 0.3 V.
4 AGND power_in Analog ground; must be connected to exposed thermal pad for proper device operation and thermal performance.
5 FB input Feedback input regulated to 0.8 V; for TPS62162-Q1 connect to AGND for improved thermal performance; external divider minimum current 2 µA.
6 VOS input Output voltage sense pin for control loop compensation; connect to VOUT at output capacitor; voltage rating -0.3 to 7 V.
7 SW output Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor; voltage range -0.3 to VIN+0.3 V.
8 PG tri_state Open-drain power good output; High = VOUT regulated (92-98% nominal), Low = VOUT below nominal (87-93%); sink current 2 mA max; requires pull-up resistor to voltage ≤7 V; goes high impedance when device is off.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (absolute maximum, VIN pin) VIN -0.3 20 V 4
Pin voltage range EN, SW (max printed as VIN+0.3) VEN, VSW -0.3 V 4
Pin voltage range FB, PG, VOS VFB, VPG, VVOS -0.3 7 V 4
Power Good sink current IPG 10 mA 4
Operating junction temperature range (absolute maximum) TJ -40 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VIN 3 17 V 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range VIN 3 17 V 5
Operating quiescent current IQ 17 30 µA EN = High, IOUT = 0 mA, Device not switching 5
Shutdown current ISD 25 µA EN = Low 5
Undervoltage lockout threshold (falling input voltage) VUVLO 2.6 2.7 2.82 V Falling input voltage 5
Power Good threshold voltage, rising VTH_PG 92 95 98 %VOUT Rising (%VOUT) 5
Power Good threshold voltage, falling VTH_PG 87 90 93 %VOUT Falling (%VOUT) 5
Power Good output low voltage VOL_PG 0.07 0.3 V IPG = –2 mA 5
Input leakage current (PG) ILKG_PG 1 400 nA VPG = 1.8 V 5
Input leakage current (EN) ILKG_EN 0.01 1 µA EN = VIN or GND 5
High-side MOSFET ON-resistance RDS(ON) 300 600 mΩ VIN ≥ 6 V 5
Low-side MOSFET ON-resistance RDS(ON) 120 200 mΩ VIN ≥ 6 V 5
High-side MOSFET forward current limit ILIMF 1.45 1.95 2.45 A VIN = 12 V, TA = 25°C 5
Pin leakage current (FB) ILKG_FB 5 400 nA VFB = 1.2 V 5
Feedback voltage accuracy (PWM mode) -3 3 % PWM Mode operation, VIN ≥ VOUT + 1 V 5
Feedback voltage accuracy (Power Save Mode) -3 4 % Power Save Mode operation, COUT = 2x22 µF 5
Junction-to-ambient thermal resistance RθJA 65.5 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 66.4 °C/W 4
Junction-to-board thermal resistance RθJB 35.5 °C/W 4
Junction-to-top characterization parameter ψJT 1.7 °C/W 4
Junction-to-board characterization parameter ψJB 35.8 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 8.4 °C/W 4

CAD (KiCad official)

  • Symbol: TPS62162QDSGTQ1
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps62162qdsgtq1-etched.step / tps62162qdsgtq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62162qdsgtq1.step / tps62162qdsgtq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 940736f835a41f87, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF