component
TPS62162QDSGTQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62162QDSGTQ1
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62162QDSGTQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground with voltage rating -0.3 to 20 V. |
| 2 | VIN | power_in | Supply voltage input rated 3 V to 17 V operating range. |
| 3 | EN | input | Enable input with internal 400 kΩ pull-down; High = enabled, Low = disabled; logic thresholds VEN_H = 0.9 V, VEN_L = 0.3 V. |
| 4 | AGND | power_in | Analog ground; must be connected to exposed thermal pad for proper device operation and thermal performance. |
| 5 | FB | input | Feedback input regulated to 0.8 V; for TPS62162-Q1 connect to AGND for improved thermal performance; external divider minimum current 2 µA. |
| 6 | VOS | input | Output voltage sense pin for control loop compensation; connect to VOUT at output capacitor; voltage rating -0.3 to 7 V. |
| 7 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor; voltage range -0.3 to VIN+0.3 V. |
| 8 | PG | tri_state | Open-drain power good output; High = VOUT regulated (92-98% nominal), Low = VOUT below nominal (87-93%); sink current 2 mA max; requires pull-up resistor to voltage ≤7 V; goes high impedance when device is off. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS62162QDSGTQ1 - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62162qdsgtq1-etched.step/tps62162qdsgtq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62162qdsgtq1.step/tps62162qdsgtq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
940736f835a41f87, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).