main
History Download
Ray tps62162dsgr: specified limits as data (metadata.characteristics, 32 rows from the datasheet) b0acce4

TPS62162DSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TPS62162DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground.
2 VIN power_in Supply voltage.
3 EN input Enable input (high = enabled, low = disabled).
4 AGND power_in Analog ground.
5 FB input Voltage feedback input for adjustable version; connect resistive divider to this pin or to AGND for fixed versions.
6 VOS input Output voltage sense pin and connection for control loop circuitry.
7 SW output Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor.
8 PG tri_state Output power good open-drain output; high when VOUT ready, low when below nominal regulation; requires pull-up resistor and goes high impedance when device switched off.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Pin voltage range VIN VIN -0.3 20 V 5
Pin voltage range EN, SW (DC) -0.3 V 5
Pin voltage range SW (AC) -2 24.5 V less than 10ns, while switching 5
Pin voltage range FB, PG, VOS -0.3 7 V 5
Power good sink current PG 10 mA 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
ESD human body model (HBM), all pins V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001, all pins 5
ESD charged device model (CDM), all pins V(ESD) -500 500 V CDM, per JEDEC JESD22-C101, all pins 5
Supply voltage VIN 3 17 V 5
Output voltage VOUT 0.9 6 V 5
Operating junction temperature TJ -40 125 °C 5
Input voltage range VIN 3 17 V 6
Operating quiescent current IQ 17 30 µA EN = High, IOUT = 0 mA, device not switching 6
Operating quiescent current IQ 17 25 µA TJ = -40°C to +85°C 6
Shutdown current ISD 1.5 25 µA EN = Low 6
Shutdown current ISD 1.5 4 µA TJ = -40°C to +85°C 6
Undervoltage lockout threshold (falling input voltage) VUVLO 2.6 2.7 2.82 V Falling input voltage 6
Input leakage current (EN) ILKG_EN 0.01 1 µA EN = VIN or GND 6
Power good threshold voltage, rising VTH_PG 92 95 98 %VOUT Rising (%VOUT) 6
Power good threshold voltage, falling VTH_PG 87 90 93 %VOUT Falling (%VOUT) 6
Power good output low voltage VOL_PG 0.07 0.3 V IPG = –2 mA 6
Input leakage current (PG) ILKG_PG 1 400 nA VPG = 1.8 V 6
High-side MOSFET ON-resistance RDS(ON) 300 600 mΩ VIN ≥ 6 V 6
Low-side MOSFET ON-resistance RDS(ON) 120 200 mΩ VIN ≥ 6 V 6
High-side MOSFET forward current limit ILIMF 1.45 1.95 2.45 A VIN = 12 V, TJ = 25°C 6
Initial output voltage accuracy -3 3 % PWM mode operation, VIN ≥ VOUT + 1 V 6
Initial output voltage accuracy (power save mode) -3.5 4 % Power save mode operation, COUT = 22 µF 6
Junction-to-ambient thermal resistance RθJA 61.8 °C/W DSG (WSON) 8-pin package 5
Junction-to-case (top) thermal resistance RθJC(top) 61.3 °C/W DSG (WSON) 8-pin package 5
Junction-to-board thermal resistance RθJB 15.5 °C/W DSG (WSON) 8-pin package 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 8.6 °C/W DSG (WSON) 8-pin package 5

CAD (KiCad official)

  • Symbol: TPS62162DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps62162dsgr-etched.step / tps62162dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62162dsgr.step / tps62162dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 729fe659c0bb2b33, retrieved 2026-09-25, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF