Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TPS62162DSGR
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62162DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground. |
| 2 | VIN | power_in | Supply voltage. |
| 3 | EN | input | Enable input (high = enabled, low = disabled). |
| 4 | AGND | power_in | Analog ground. |
| 5 | FB | input | Voltage feedback input for adjustable version; connect resistive divider to this pin or to AGND for fixed versions. |
| 6 | VOS | input | Output voltage sense pin and connection for control loop circuitry. |
| 7 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |
| 8 | PG | tri_state | Output power good open-drain output; high when VOUT ready, low when below nominal regulation; requires pull-up resistor and goes high impedance when device switched off. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin voltage range VIN | VIN | -0.3 | 20 | V | 5 | ||
| Pin voltage range EN, SW (DC) | -0.3 | V | 5 | ||||
| Pin voltage range SW (AC) | -2 | 24.5 | V | less than 10ns, while switching | 5 | ||
| Pin voltage range FB, PG, VOS | -0.3 | 7 | V | 5 | |||
| Power good sink current PG | 10 | mA | 5 | ||||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD human body model (HBM), all pins | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001, all pins | 5 | |
| ESD charged device model (CDM), all pins | V(ESD) | -500 | 500 | V | CDM, per JEDEC JESD22-C101, all pins | 5 | |
| Supply voltage | VIN | 3 | 17 | V | 5 | ||
| Output voltage | VOUT | 0.9 | 6 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input voltage range | VIN | 3 | 17 | V | 6 | ||
| Operating quiescent current | IQ | 17 | 30 | µA | EN = High, IOUT = 0 mA, device not switching | 6 | |
| Operating quiescent current | IQ | 17 | 25 | µA | TJ = -40°C to +85°C | 6 | |
| Shutdown current | ISD | 1.5 | 25 | µA | EN = Low | 6 | |
| Shutdown current | ISD | 1.5 | 4 | µA | TJ = -40°C to +85°C | 6 | |
| Undervoltage lockout threshold (falling input voltage) | VUVLO | 2.6 | 2.7 | 2.82 | V | Falling input voltage | 6 |
| Input leakage current (EN) | ILKG_EN | 0.01 | 1 | µA | EN = VIN or GND | 6 | |
| Power good threshold voltage, rising | VTH_PG | 92 | 95 | 98 | %VOUT | Rising (%VOUT) | 6 |
| Power good threshold voltage, falling | VTH_PG | 87 | 90 | 93 | %VOUT | Falling (%VOUT) | 6 |
| Power good output low voltage | VOL_PG | 0.07 | 0.3 | V | IPG = –2 mA | 6 | |
| Input leakage current (PG) | ILKG_PG | 1 | 400 | nA | VPG = 1.8 V | 6 | |
| High-side MOSFET ON-resistance | RDS(ON) | 300 | 600 | mΩ | VIN ≥ 6 V | 6 | |
| Low-side MOSFET ON-resistance | RDS(ON) | 120 | 200 | mΩ | VIN ≥ 6 V | 6 | |
| High-side MOSFET forward current limit | ILIMF | 1.45 | 1.95 | 2.45 | A | VIN = 12 V, TJ = 25°C | 6 |
| Initial output voltage accuracy | -3 | 3 | % | PWM mode operation, VIN ≥ VOUT + 1 V | 6 | ||
| Initial output voltage accuracy (power save mode) | -3.5 | 4 | % | Power save mode operation, COUT = 22 µF | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 61.8 | °C/W | DSG (WSON) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 61.3 | °C/W | DSG (WSON) 8-pin package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 15.5 | °C/W | DSG (WSON) 8-pin package | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 8.6 | °C/W | DSG (WSON) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
TPS62162DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62162dsgr-etched.step/tps62162dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62162dsgr.step/tps62162dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
729fe659c0bb2b33, retrieved 2026-09-25, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).