main
History Download
Ray tps62130rgtr: specified limits as data (metadata.characteristics, 34 rows from the datasheet) cd62cf9

TPS62130RGTR

Texas Instruments · DC-DC Converters · QFN-16-EP(3x3)

TPS62130RGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node connected to internal MOSFET switches.
2 SW output Switch node connected to internal MOSFET switches.
3 SW output Switch node connected to internal MOSFET switches.
4 PG output Open-drain power good output (high = VOUT ready, low = VOUT below nominal regulation); requires external pull-up resistor.
5 FB input Voltage feedback input for adjustable version; connect resistive voltage divider to set output voltage (max 7V).
6 AGND power_in Analog ground; must be connected directly to exposed thermal pad and common ground plane.
7 FSW input Switching frequency select input (low ≈ 2.5 MHz, high ≈ 1.25 MHz typical); internal pull-down; max 7V.
8 DEF input Output voltage scaling input (low = nominal, high = nominal + 5%); internal pull-down; max 7V.
9 SS/TR input Soft-start/tracking input pin; external capacitor sets voltage reference rise time for startup and tracking sequencing; max VIN+0.3V.
10 AVIN power_in Supply voltage for control circuitry (3V to 17V); must connect to same source as PVIN.
11 PVIN power_in Supply voltage for power stage (3V to 17V); must connect to same source as AVIN.
12 PVIN power_in Supply voltage for power stage (3V to 17V); must connect to same source as AVIN.
13 EN input Enable input (high = enabled, low = disabled/shutdown); internal pull-down; max VIN+0.3V.
14 VOS input Output voltage sense pin for control loop circuitry connection; max 7V.
15 PGND power_in Power ground; must be connected directly to exposed thermal pad and common ground plane.
16 PGND power_in Power ground; must be connected directly to exposed thermal pad and common ground plane.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Pin voltage range AVIN, PVIN -0.3 20 V All voltages with respect to network ground terminal 4
Pin voltage range DEF, FSW, FB, PG, VOS -0.3 7 V All voltages with respect to network ground terminal 4
Power Good sink current PG 10 mA 4
Operating junction temperature range TJ -40 150 °C Over operating junction temperature range 4
Storage temperature Tstg -65 150 °C 4
Supply Voltage, VIN (at AVIN and PVIN) VIN 3 17 V Over operating junction temperature range 4
Operating junction temperature TJ -40 125 °C Over operating junction temperature range 4
VIN Input voltage range VIN 3 17 V 5
Undervoltage lockout threshold VUVLO 2.6 2.7 2.8 V Falling Input Voltage (PWM mode operation) 5
Operating quiescent current IQ 17 30 µA EN=High, IOUT = 0 mA, device not switching 5
Operating quiescent current IQ 17 25 µA TA = -40°C to +85°C 5
Shutdown current ISD 1.5 25 µA EN=Low 5
Shutdown current ISD 1.5 4 µA TA = -40°C to +85°C 5
Input leakage current (EN, DEF, FSW) ILKG 0.01 1 µA EN=VIN or GND; DEF, FSW=VOUT or GND 5
Power good threshold voltage, rising VTH_PG 92 95 98 % Rising (%VOUT) 5
Power good threshold voltage, falling VTH_PG 87 90 94 % Falling (%VOUT) 5
Power good output low VOL_PG 0.07 0.3 V IPG=–2mA 5
Input leakage current (PG) ILKG_PG 1 400 nA VPG=1.8V 5
SS/TR pin source current ISS/TR 2.3 2.5 2.7 µA 5
High-side MOSFET ON-resistance RDS(ON) 90 170 mΩ VIN≥6V 5
Low-side MOSFET ON-resistance RDS(ON) 40 70 mΩ VIN≥6V 5
High-side MOSFET forward current limit ILIMF 3.6 4.2 4.9 A VIN =12V, TA= 25°C 5
Input leakage current (FB) ILKG_FB 1 100 nA TPS62130, VFB=0.8V 5
Output voltage range (TPS62130) VOUT 0.9 6 V VIN ≥ VOUT 5
Initial output voltage accuracy, PWM mode VOUT 785.6 800 814.4 mV PWM mode operation, VIN ≥ VOUT +1V 5
Initial output voltage accuracy, PWM mode, TA = -10°C to 85°C VOUT 788 800 812.8 mV PWM mode operation, VIN ≥ VOUT +1V, TA = –10°C to 85°C 5
Initial output voltage accuracy, Power Save Mode VOUT 781.6 800 822.4 mV Power Save Mode operation, COUT=22µF 5
Tracking Feedback Voltage (TPS62130) VSS/TR 212.6 225 237.4 mV VSS/TR = 350mV 5
Thermal resistance, junction-to-ambient RθJA 45 °C/W RGT 16 PINS 4
Thermal resistance, junction-to-case(top) RθJCtop 53.6 °C/W RGT 16 PINS 4
Thermal resistance, junction-to-board RθJB 17.4 °C/W RGT 16 PINS 4
Junction-to-top characterization parameter ψJT 1.1 °C/W RGT 16 PINS 4
Junction-to-board characterization parameter ψJB 17.4 °C/W RGT 16 PINS 4
Thermal resistance, junction-to-case(bottom) RθJCbot 4.5 °C/W RGT 16 PINS 4

CAD (KiCad official)

  • Symbol: TPS62130RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps62130rgtr-etched.step / tps62130rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62130rgtr.step / tps62130rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 f9b1af285622c0cf, retrieved 2026-09-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF