main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps62130aqrgtrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps62130aqrgtrq1: viewers · Ray
package.json tps62130aqrgtrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps62130aqrgtrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps62130aqrgtrq1 · Ray
tps62130aqrgtrq1-etched.fit.json tps62130aqrgtrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62130aqrgtrq1-etched.glb tps62130aqrgtrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62130aqrgtrq1-etched.step tps62130aqrgtrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62130aqrgtrq1.glb Publish 0.1.0 · Ray
tps62130aqrgtrq1.kicad_mod Publish 0.1.0 · Ray
tps62130aqrgtrq1.kicad_sym Publish 0.1.0 · Ray
tps62130aqrgtrq1.lbr Publish 0.1.0 · Ray
tps62130aqrgtrq1.step Publish 0.1.0 · Ray

TPS62130AQRGTRQ1

Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)

TPS62130AQRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor.
2 SW output Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor.
3 SW output Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor.
4 PG tri_state Output power good signal indicating VOUT ready status with open-drain architecture requiring pull-up resistor.
5 FB input Voltage feedback of adjustable version for resistive voltage divider connection; recommended to connect FB to AGND on fixed versions.
6 AGND power_in Analog ground pin that must be connected directly to exposed thermal pad and common ground plane.
7 FSW input Switching frequency select pin; low selects 2.5MHz typical operation while high selects 1.25MHz typical operation.
8 DEF input Output voltage scaling pin; low sets nominal voltage and high sets nominal voltage plus 5%.
9 SS/TR input Soft-start/tracking pin with external capacitor setting internal voltage reference rise time for tracking and sequencing.
10 AVIN power_in Supply voltage for control circuitry that must connect to same source as PVIN.
11 PVIN power_in Supply voltage for power stage that must connect to same source as AVIN.
12 PVIN power_in Supply voltage for power stage that must connect to same source as AVIN.
13 EN input Enable input pin; high level enables device operation and low level disables device.
14 VOS input Output voltage sense pin and connection for control loop circuitry.
15 PGND power_in Power ground pin that must be connected directly to exposed thermal pad and common ground plane.
16 PGND power_in Power ground pin that must be connected directly to exposed thermal pad and common ground plane.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TPS62130AQRGTRQ1
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps62130aqrgtrq1-etched.step / tps62130aqrgtrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62130aqrgtrq1.step / tps62130aqrgtrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 e132f3ce7dba7fa6, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF