component
TPS62097QWRGTRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62097QWRGTRQ1
Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)
TPS62097QWRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS | input | Output voltage sense pin that must be connected directly to the output capacitor. |
| 2 | FB | input | Feedback pin: a resistor divider sets the output voltage on the adjustable version, it is recommended to connect to AGND on fixed-output versions, and an internal 400 kΩ to AGND lets it be left floating; absolute maximum voltage is 3.0 V. |
| 3 | MODE | input | Mode selection pin: connect to AGND for Power Save Mode with automatic PWM/Power Save transition, or connect to an external resistor or leave floating for forced PWM only. |
| 4 | AGND | power_in | Analog ground pin, which is also the connection for the exposed thermal pad. |
| 5 | PGND | power_in | Power ground pin. |
| 6 | PGND | power_in | Power ground pin. |
| 7 | PVIN | power_in | Power input supply pin, operating from 2.5 V to 6.0 V input voltage range. |
| 8 | PVIN | power_in | Power input supply pin, operating from 2.5 V to 6.0 V input voltage range. |
| 9 | AVIN | power_in | Analog input supply pin that must be connected to the PVIN pin together. |
| 10 | SS/TR | input | Soft-start and voltage-tracking pin; a capacitor sets the soft-start time, and leaving it floating sets the minimum startup time. |
| 11 | PG | output | Power-good open-drain output whose pull-up resistor must not be connected to any voltage higher than 6 V; leave floating if unused. |
| 12 | EN | input | Enable pin that must be pulled high to enable the device and pulled low to disable it, with an internal pull-down of typically 375 kΩ when disabled. |
| 13 | SW | power_out | Switch pin connected to the internal MOSFET switches; the external inductor connects between this terminal and the output capacitor. |
| 14 | SW | power_out | Switch pin connected to the internal MOSFET switches; the external inductor connects between this terminal and the output capacitor. |
| 15 | SW | power_out | Switch pin connected to the internal MOSFET switches; the external inductor connects between this terminal and the output capacitor. |
| 16 | SW | power_out | Switch pin connected to the internal MOSFET switches; the external inductor connects between this terminal and the output capacitor. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS62097QWRGTRQ1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps62097qwrgtrq1-etched.step/tps62097qwrgtrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62097qwrgtrq1.step/tps62097qwrgtrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
2c1171bf86632370, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).