main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps62091rgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps62091rgtr: viewers · Ray
package.json tps62091rgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps62091rgtr: specified limits as data (metadata.characteristics, 43 rows from the datasheet) · Ray
README.md tps62091rgtr: specified limits as data (metadata.characteristics, 43 rows from the datasheet) · Ray
tps62091rgtr-etched.fit.json tps62091rgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62091rgtr-etched.glb tps62091rgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62091rgtr-etched.step tps62091rgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62091rgtr.glb Publish 0.1.0 · Ray
tps62091rgtr.kicad_mod Publish 0.1.0 · Ray
tps62091rgtr.kicad_sym Publish 0.1.0 · Ray
tps62091rgtr.lbr Publish 0.1.0 · Ray
tps62091rgtr.step Publish 0.1.0 · Ray

TPS62091RGTR

Texas Instruments · DC-DC Converters · QFN-16-EP(3x3)

TPS62091RGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW bidirectional Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V.
2 SW bidirectional Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V.
3 FREQ input Frequency selection input; GND selects 2.8 MHz, VIN selects 1.4 MHz switching frequency; has internal 400 kΩ pull-down, floating defaults to 2.8 MHz.
4 PG tri_state Power good open-drain output; high impedance when output within regulation, pulled low when below nominal value; maximum sink current 1 mA.
5 FB input Feedback input pin for output voltage regulation; connect resistor divider to set output voltage in adjustable versions; fixed versions have 400 kΩ pull-down when EN is low.
6 AGND power_in Analog ground reference for control circuitry and feedback signals; connected to exposed thermal pad.
7 CP bidirectional Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V.
8 CN bidirectional Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V.
9 SS input Softstart ramp control pin; external capacitor sets startup ramp time with 7.5 µA charge current; floating pin sets minimum startup time around 50 µs.
10 AVIN power_in Bias supply input voltage pin for IC control circuitry; operating range 2.5 V to 6 V; voltage limits -0.3 V to 7 V.
11 PVIN power_in Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V.
12 PVIN power_in Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V.
13 EN input Device enable input; pull high to enable converter, pull low to disable; has internal 400 kΩ pull-down resistor; shutdown current 0.6 µA typical.
14 PGND power_in Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation.
15 PGND power_in Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation.
16 VOS input Output voltage sense pin; connects directly to converter output for feedback regulation; noise-sensitive requiring short direct routing; voltage limits -0.3 V to 7 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage range PVIN, AVIN, FB, SS, EN, FREQ, VOS -0.3 7 V 4
Voltage range SW, PG -0.3 V 4
Voltage range CN, CP -0.3 V 4
Power Good sink current PG 1 mA 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage range VIN 2.5 6 V 4
Operating ambient temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range VIN 2.5 6 V 5
Undervoltage lockout threshold 2.1 2.2 2.3 V VIN falling 5
Shutdown current Isd 0.6 5 µA Into PVIN and AVIN 5
Input leakage current EN, FREQ Ilkg 10 100 nA EN, FREQ = GND or VIN 5
High level input voltage VH 0.65 1 V VIN = 2.5 V to 6 V 5
Low level input voltage VL 0.4 V VIN = 2.5 V to 6 V 5
Softstart current ISS 6.3 7.5 8.7 µA 5
Power good threshold, output voltage rising Vth 93 95 97 % Output voltage rising 5
Power good threshold, output voltage falling Vth 88 90 92 % Output voltage falling 5
High side FET switch current limit ILIM 3.7 4.6 5.5 A 5
Leakage current (power good) Ilkg 10 100 nA VPG = 3.6 V 5
Output voltage range Vs 0.8 V 5
Output voltage accuracy (fixed output voltage, PWM) VOUT -1.4 1.4 % VIN ≥ VOUT + 1 V, fixed output voltage; IOUT = 1 A, PWM mode 5
Output voltage accuracy (fixed output voltage, PFM) VOUT -1.4 2.5 % VIN ≥ VOUT + 1 V, fixed output voltage; IOUT = 0 mA, FREQ = High and Low, PFM mode 5
Quiescent current IQIN 20 µA Not switching, FB = FB +5%, into PVIN and AVIN 5
Undervoltage lockout hysteresis 200 mV 5
Thermal shutdown 150 ºC Temperature rising 5
Thermal shutdown hysteresis 20 ºC 5
Pull down resistance RPD 400 kΩ 5
Low level voltage (power good) VL 0.4 V I(sink) = 1 mA 5
PG sinking current IPG 1 mA 5
High side FET on-resistance RDS(on) 50 mΩ ISW = 500 mA 5
Low side FET on-resistance RDS(on) 40 mΩ ISW = 500 mA 5
Switching frequency (FREQ = GND) fs 2.8 MHz FREQ = GND, IOUT = 3 A 5
Switching frequency (FREQ = VIN) fs 1.4 MHz FREQ = VIN, IOUT = 3 A 5
Output discharge resistor Rod 200 Ω EN = GND, VOUT = 1.8 V 5
Line regulation 0.016 %/V VOUT = 1.8 V, PWM operation 5
Load regulation 0.04 %/A VOUT = 1.8 V, PWM operation 5
Junction-to-ambient thermal resistance RθJA 47 °C/W 4
Junction-to-case (top) thermal resistance RθJCtop 60 °C/W 4
Junction-to-board thermal resistance RθJB 20 °C/W 4
Junction-to-top characterization parameter ψJT 1.5 °C/W 4
Junction-to-board characterization parameter ψJB 20 °C/W 4
Junction-to-case (bottom) thermal resistance RθJCbot 5.3 °C/W 4

CAD (KiCad official)

  • Symbol: TPS62091RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps62091rgtr-etched.step / tps62091rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62091rgtr.step / tps62091rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 1aca00440b3d4033, retrieved 2026-09-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF