← Commit history

Initial commit: component/tps62091rgtr

Ray ·4818e88c70 ·
2 files changed +265
README.mdadded+53
@@ -0,0 +1,53 @@+# TPS62091RGTR++**Texas Instruments** · DC-DC Converters · QFN-16-EP(3x3)++TPS62091RGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | bidirectional | Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V. |+| 2 | SW | bidirectional | Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V. |+| 3 | FREQ | input | Frequency selection input; GND selects 2.8 MHz, VIN selects 1.4 MHz switching frequency; has internal 400 kΩ pull-down, floating defaults to 2.8 MHz. |+| 4 | PG | tri_state | Power good open-drain output; high impedance when output within regulation, pulled low when below nominal value; maximum sink current 1 mA. |+| 5 | FB | input | Feedback input pin for output voltage regulation; connect resistor divider to set output voltage in adjustable versions; fixed versions have 400 kΩ pull-down when EN is low. |+| 6 | AGND | power_in | Analog ground reference for control circuitry and feedback signals; connected to exposed thermal pad. |+| 7 | CP | bidirectional | Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V. |+| 8 | CN | bidirectional | Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V. |+| 9 | SS | input | Softstart ramp control pin; external capacitor sets startup ramp time with 7.5 µA charge current; floating pin sets minimum startup time around 50 µs. |+| 10 | AVIN | power_in | Bias supply input voltage pin for IC control circuitry; operating range 2.5 V to 6 V; voltage limits -0.3 V to 7 V. |+| 11 | PVIN | power_in | Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V. |+| 12 | PVIN | power_in | Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V. |+| 13 | EN | input | Device enable input; pull high to enable converter, pull low to disable; has internal 400 kΩ pull-down resistor; shutdown current 0.6 µA typical. |+| 14 | PGND | power_in | Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation. |+| 15 | PGND | power_in | Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation. |+| 16 | VOS | input | Output voltage sense pin; connects directly to converter output for feedback regulation; noise-sensitive requiring short direct routing; voltage limits -0.3 V to 7 V. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS62091RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps62091rgtr-etched.step` / `tps62091rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62091rgtr.step` / `tps62091rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps62091.pdf) (32 pp, sha256 `1aca00440b3d4033`, retrieved 2026-09-27, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62091rgtr-datasheet.pdf)
page.jsonadded+212
@@ -0,0 +1,212 @@+{+  "slug": "tps62091rgtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps62091rgtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps62091rgtr.kicad_sym",+    "tps62091rgtr.kicad_mod",+    "tps62091rgtr.glb",+    "tps62091rgtr.step",+    "tps62091rgtr.lbr",+    "docs/hero.png",+    "docs/tps62091rgtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS62091RGTR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps62091.pdf",+    "parts": {+      "symbol": "tps62091rgtr.kicad_sym",+      "footprint": "tps62091rgtr.kicad_mod",+      "model_3d": "tps62091rgtr-etched.glb",+      "model_3d_plain": "tps62091rgtr.glb",+      "model_3d_step": "tps62091rgtr-etched.step",+      "model_3d_step_plain": "tps62091rgtr.step",+      "lbr": "tps62091rgtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2070608",+      "digikey": "296-46388-2-ND",+      "mouser": "595-TPS62091RGTR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T13:44:35Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-46388-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS62091RGTR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "bidirectional",+        "description": "Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "bidirectional",+        "description": "Switch node of the power stage connecting high-side MOSFET, inductor, and low-side MOSFET; voltage range -0.3 V to VIN + 0.3 V."+      },+      {+        "number": "3",+        "name": "FREQ",+        "type": "input",+        "description": "Frequency selection input; GND selects 2.8 MHz, VIN selects 1.4 MHz switching frequency; has internal 400 kΩ pull-down, floating defaults to 2.8 MHz."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "tri_state",+        "description": "Power good open-drain output; high impedance when output within regulation, pulled low when below nominal value; maximum sink current 1 mA."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input pin for output voltage regulation; connect resistor divider to set output voltage in adjustable versions; fixed versions have 400 kΩ pull-down when EN is low."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference for control circuitry and feedback signals; connected to exposed thermal pad."+      },+      {+        "number": "7",+        "name": "CP",+        "type": "bidirectional",+        "description": "Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V."+      },+      {+        "number": "8",+        "name": "CN",+        "type": "bidirectional",+        "description": "Charge pump flying capacitor; connect 10 nF capacitor between CP and CN to complete gate driver charge pump; voltage range -0.3 V to VIN + 7.0 V."+      },+      {+        "number": "9",+        "name": "SS",+        "type": "input",+        "description": "Softstart ramp control pin; external capacitor sets startup ramp time with 7.5 µA charge current; floating pin sets minimum startup time around 50 µs."+      },+      {+        "number": "10",+        "name": "AVIN",+        "type": "power_in",+        "description": "Bias supply input voltage pin for IC control circuitry; operating range 2.5 V to 6 V; voltage limits -0.3 V to 7 V."+      },+      {+        "number": "11",+        "name": "PVIN",+        "type": "power_in",+        "description": "Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V."+      },+      {+        "number": "12",+        "name": "PVIN",+        "type": "power_in",+        "description": "Primary power supply input voltage pin; operating range 2.5 V to 6 V; requires 10 µF or larger input capacitor; voltage limits -0.3 V to 7 V."+      },+      {+        "number": "13",+        "name": "EN",+        "type": "input",+        "description": "Device enable input; pull high to enable converter, pull low to disable; has internal 400 kΩ pull-down resistor; shutdown current 0.6 µA typical."+      },+      {+        "number": "14",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return path for output stage; must be soldered to exposed thermal pad for mechanical reliability and thermal dissipation."+      },+      {+        "number": "16",+        "name": "VOS",+        "type": "input",+        "description": "Output voltage sense pin; connects directly to converter output for feedback regulation; noise-sensitive requiring short direct routing; voltage limits -0.3 V to 7 V."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 32,+        "cost_usd": 0.3573,+        "at": "2026-09-27T13:44:17"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps62091.pdf",+        "pages": 32,+        "sha256": "1aca00440b3d4033",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file