TPS62026DGQ

{
  "slug": "tps62026dgq",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps62026dgq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps62026dgq.kicad_sym",
    "tps62026dgq.kicad_mod",
    "tps62026dgq.glb",
    "tps62026dgq.step",
    "tps62026dgq.lbr",
    "docs/hero.png",
    "docs/tps62026dgq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps62026dgq-hero.glb",
    "tps62026dgq-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS62026DGQ",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps62020",
    "parts": {
      "symbol": "tps62026dgq.kicad_sym",
      "footprint": "tps62026dgq.kicad_mod",
      "model_3d": "tps62026dgq-hero.glb",
      "model_3d_plain": "tps62026dgq.glb",
      "model_3d_step": "tps62026dgq-etched.step",
      "model_3d_step_plain": "tps62026dgq.step",
      "lbr": "tps62026dgq.lbr"
    },
    "distributor_links": {
      "lcsc": "C1356111",
      "digikey": "2156-TPS62026DGQ-ND",
      "mouser": "595-TPS62026DGQ"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T01:18:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-TPS62026DGQ-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS62026DGQ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: pulling EN to ground forces shutdown mode, pulling EN to VI enables the device, and EN must not be left floating and must be terminated."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input for the converter."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input for the converter (second VIN pin, bonded to the same supply)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input: connect an external resistor divider to this pin, or connect FB directly to the output for the fixed 3.3 V version."
      },
      {
        "number": "6",
        "name": "MODE",
        "type": "input",
        "description": "Active-high MODE pin on the TPS62026: pulling MODE high forces fixed-frequency PWM operation, and pulling it low enables Power Save Mode (PFM at light load, fixed-frequency PWM at medium to heavy load)."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "bidirectional",
        "description": "Switch pin of the converter, connected to the drain of the internal power MOSFETs."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "bidirectional",
        "description": "Switch pin of the converter, connected to the drain of the internal power MOSFETs (second SW pin)."
      },
      {
        "number": "9",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground (second PGND pin)."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DGQ package has a PowerPAD thermal pad. The datasheet says it must be connected to GND, but it g; The package hint 'MSOP-10-EP' is matched to the DGQ package, which the datasheet calls a 10-pin MSOP; Pins 2/3, 7/8 and 9/10 are shared-name pins. Each is listed separately with its printed number, as t",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0503,
        "at": "2026-10-12T01:17:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps62020",
        "pages": 31,
        "sha256": "092ca3f3b8670f56",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps62026dgq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps62026dgq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "64a30728b3d28d13bb19103fe83cc534e1a9e1c2411cd7baff7f171ae38befe9",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}