main
History Download
Ray Initial commit: component/tps61500pwp a22351f

TPS61500PWP

Texas Instruments · LED Drivers · HTSSOP-14-EP

TPS61500PWP from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching node of the IC; connect to the switched side of the inductor.
2 SW output Switching node of the IC; connect to the switched side of the inductor.
3 VIN power_in Input supply pin; accepts supply voltage between 2.9 V and 18 V.
4 EN input Enable pin; voltage below 0.4 V for more than 10 ms turns off the IC; also used for PWM signal input for LED brightness dimming.
5 SS output Soft start programming pin; capacitor between SS pin and GND programs soft-start timing.
6 DIMC input Analog and PWM dimming method option pin; capacitor for analog dimming with internal RC filter, float for PWM dimming.
7 AGND power_in Signal ground of the IC.
8 COMP output Output of the transconductance error amplifier; external RC network connected to this pin for loop compensation.
9 FB input Feedback pin for positive voltage regulation at 200 mV; resistor connected to GND programs LED current.
10 FREQ output Switch frequency program pin; external resistor sets frequency from 200 kHz to 2.2 MHz.
11 OVP input Overvoltage protection input with 1.229 V reference; resistor divider programs OVP threshold to protect LED driver.
12 PGND power_in Power ground of the IC; connected to the source of the PWM switch.
13 PGND power_in Power ground of the IC; connected to the source of the PWM switch.
14 PGND power_in Power ground of the IC; connected to the source of the PWM switch.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category LED Drivers
Pins 15

CAD (KiCad official)

  • Symbol: TPS61500PWP
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: tps61500pwp-etched.step / tps61500pwp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61500pwp.step / tps61500pwp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 310f1f4868e1fcd3, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF