← Commit history

Initial commit: component/tps61500pwp

Ray ·a22351f3e0 ·
2 files changed +254
README.mdadded+52
@@ -0,0 +1,52 @@+# TPS61500PWP++**Texas Instruments** · LED Drivers · HTSSOP-14-EP++TPS61500PWP from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switching node of the IC; connect to the switched side of the inductor. |+| 2 | SW | output | Switching node of the IC; connect to the switched side of the inductor. |+| 3 | VIN | power_in | Input supply pin; accepts supply voltage between 2.9 V and 18 V. |+| 4 | EN | input | Enable pin; voltage below 0.4 V for more than 10 ms turns off the IC; also used for PWM signal input for LED brightness dimming. |+| 5 | SS | output | Soft start programming pin; capacitor between SS pin and GND programs soft-start timing. |+| 6 | DIMC | input | Analog and PWM dimming method option pin; capacitor for analog dimming with internal RC filter, float for PWM dimming. |+| 7 | AGND | power_in | Signal ground of the IC. |+| 8 | COMP | output | Output of the transconductance error amplifier; external RC network connected to this pin for loop compensation. |+| 9 | FB | input | Feedback pin for positive voltage regulation at 200 mV; resistor connected to GND programs LED current. |+| 10 | FREQ | output | Switch frequency program pin; external resistor sets frequency from 200 kHz to 2.2 MHz. |+| 11 | OVP | input | Overvoltage protection input with 1.229 V reference; resistor divider programs OVP threshold to protect LED driver. |+| 12 | PGND | power_in | Power ground of the IC; connected to the source of the PWM switch. |+| 13 | PGND | power_in | Power ground of the IC; connected to the source of the PWM switch. |+| 14 | PGND | power_in | Power ground of the IC; connected to the source of the PWM switch. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | LED Drivers |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS61500PWP`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `tps61500pwp-etched.step` / `tps61500pwp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61500pwp.step` / `tps61500pwp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61500) (30 pp, sha256 `310f1f4868e1fcd3`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61500pwp-datasheet.pdf)
page.jsonadded+202
@@ -0,0 +1,202 @@+{+  "slug": "tps61500pwp",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps61500pwp",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps61500pwp.kicad_sym",+    "tps61500pwp.kicad_mod",+    "tps61500pwp.glb",+    "tps61500pwp.step",+    "tps61500pwp.lbr",+    "docs/hero.png",+    "docs/tps61500pwp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS61500PWP",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61500",+    "parts": {+      "symbol": "tps61500pwp.kicad_sym",+      "footprint": "tps61500pwp.kicad_mod",+      "model_3d": "tps61500pwp-etched.glb",+      "model_3d_plain": "tps61500pwp.glb",+      "model_3d_step": "tps61500pwp-etched.step",+      "model_3d_step_plain": "tps61500pwp.step",+      "lbr": "tps61500pwp.lbr"+    },+    "distributor_links": {+      "lcsc": "C1554283",+      "digikey": "296-34628-5-ND",+      "mouser": "595-TPS61500PWP"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T22:19:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-34628-5-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS61500PWP",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switching node of the IC; connect to the switched side of the inductor."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switching node of the IC; connect to the switched side of the inductor."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin; accepts supply voltage between 2.9 V and 18 V."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; voltage below 0.4 V for more than 10 ms turns off the IC; also used for PWM signal input for LED brightness dimming."+      },+      {+        "number": "5",+        "name": "SS",+        "type": "output",+        "description": "Soft start programming pin; capacitor between SS pin and GND programs soft-start timing."+      },+      {+        "number": "6",+        "name": "DIMC",+        "type": "input",+        "description": "Analog and PWM dimming method option pin; capacitor for analog dimming with internal RC filter, float for PWM dimming."+      },+      {+        "number": "7",+        "name": "AGND",+        "type": "power_in",+        "description": "Signal ground of the IC."+      },+      {+        "number": "8",+        "name": "COMP",+        "type": "output",+        "description": "Output of the transconductance error amplifier; external RC network connected to this pin for loop compensation."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin for positive voltage regulation at 200 mV; resistor connected to GND programs LED current."+      },+      {+        "number": "10",+        "name": "FREQ",+        "type": "output",+        "description": "Switch frequency program pin; external resistor sets frequency from 200 kHz to 2.2 MHz."+      },+      {+        "number": "11",+        "name": "OVP",+        "type": "input",+        "description": "Overvoltage protection input with 1.229 V reference; resistor divider programs OVP threshold to protect LED driver."+      },+      {+        "number": "12",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the PWM switch."+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the PWM switch."+      },+      {+        "number": "14",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the PWM switch."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 15 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint",+          "1/15 pins cited to the wrong page (name found elsewhere): ['13:PGND@p3']"+        ],+        "pages_sent": 30,+        "cost_usd": 0.4556,+        "at": "2026-09-26T22:18:51"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps61500",+        "pages": 30,+        "sha256": "310f1f4868e1fcd3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file