main
Ray tps61181arter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 05a7388
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps61181arter",
  "title": "TPS61181ARTER",
  "brief": "Texas Instruments LED Drivers, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "tps61181arter",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS61181ARTER",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61181a",
    "parts": {
      "symbol": "tps61181arter.kicad_sym",
      "footprint": "tps61181arter.kicad_mod",
      "model_3d": "tps61181arter-etched.glb",
      "model_3d_plain": "tps61181arter.glb",
      "model_3d_step": "tps61181arter-etched.step",
      "model_3d_step_plain": "tps61181arter.step",
      "lbr": "tps61181arter.lbr"
    },
    "distributor_links": {
      "lcsc": "C2679379",
      "digikey": "296-38818-2-ND",
      "mouser": "595-TPS61181ARTER"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T07:02:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-38818-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS61181ARTER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground of the IC internally connected to the PWM switch source."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Switching node connected to internal PWM switch drain, external Schottky diode and inductor."
      },
      {
        "number": "3",
        "name": "VBAT",
        "type": "power_in",
        "description": "Battery supply input (4.5 to 24 V) providing pull-up voltage for Fault pin and input to internal LDO."
      },
      {
        "number": "4",
        "name": "VO",
        "type": "output",
        "description": "Boost regulator output voltage monitoring pin (up to 38 V) connected to anode of WLED strings."
      },
      {
        "number": "5",
        "name": "ISET",
        "type": "input",
        "description": "Resistor pin programming WLED output current."
      },
      {
        "number": "6",
        "name": "Cin",
        "type": "power_in",
        "description": "LDO output supply voltage (2.7 to 3.6 V) requiring 0.1 μF bypass capacitor."
      },
      {
        "number": "7",
        "name": "IFB1",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "8",
        "name": "IFB2",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "9",
        "name": "IFB3",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground of the IC."
      },
      {
        "number": "11",
        "name": "DCTRL",
        "type": "input",
        "description": "Dimming control logic input (0 to 20 V) operating at 100 Hz to 1 kHz frequency."
      },
      {
        "number": "12",
        "name": "IFB4",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "13",
        "name": "IFB5",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "14",
        "name": "IFB6",
        "type": "input",
        "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."
      },
      {
        "number": "15",
        "name": "EN",
        "type": "input",
        "description": "Enable input (0 to 20 V); logic high enables IC and internal LDO."
      },
      {
        "number": "16",
        "name": "Fault",
        "type": "output",
        "description": "Gate driver output providing pull-down drive to external PFET and fault reporting."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Fault pin (pin 16) is marked as input 'I' in PIN ASSIGNMENTS table on page 5, but the description cl",
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 30,
        "cost_usd": 0.3428,
        "at": "2026-09-27T07:01:52"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps61181a",
        "pages": 30,
        "sha256": "a22c966358df4bb3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61181arter.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61181arter-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5ab06dcffeec31cd4454481dc0969d8caf863c6d5d0c73c534d47a00862c832c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-16-EP(3x3)",
      "Category": "LED Drivers",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps61181arter"
  ],
  "discovery_pitch": "TPS61181ARTER (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61181arter.kicad_sym",
    "tps61181arter.kicad_mod",
    "tps61181arter.glb",
    "tps61181arter.step",
    "tps61181arter.lbr",
    "docs/hero.png",
    "docs/tps61181arter-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}