main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps61181arter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps61181arter: viewers · Ray
package.json tps61181arter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps61181arter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps61181arter · Ray
tps61181arter-etched.fit.json tps61181arter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61181arter-etched.glb tps61181arter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61181arter-etched.step tps61181arter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61181arter.glb Publish 0.1.0 · Ray
tps61181arter.kicad_mod Publish 0.1.0 · Ray
tps61181arter.kicad_sym Publish 0.1.0 · Ray
tps61181arter.lbr Publish 0.1.0 · Ray
tps61181arter.step Publish 0.1.0 · Ray

TPS61181ARTER

Texas Instruments · LED Drivers · WQFN-16-EP(3x3)

TPS61181ARTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground of the IC internally connected to the PWM switch source.
2 SW output Switching node connected to internal PWM switch drain, external Schottky diode and inductor.
3 VBAT power_in Battery supply input (4.5 to 24 V) providing pull-up voltage for Fault pin and input to internal LDO.
4 VO output Boost regulator output voltage monitoring pin (up to 38 V) connected to anode of WLED strings.
5 ISET input Resistor pin programming WLED output current.
6 Cin power_in LDO output supply voltage (2.7 to 3.6 V) requiring 0.1 μF bypass capacitor.
7 IFB1 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
8 IFB2 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
9 IFB3 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
10 GND power_in Signal ground of the IC.
11 DCTRL input Dimming control logic input (0 to 20 V) operating at 100 Hz to 1 kHz frequency.
12 IFB4 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
13 IFB5 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
14 IFB6 input Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop.
15 EN input Enable input (0 to 20 V); logic high enables IC and internal LDO.
16 Fault output Gate driver output providing pull-down drive to external PFET and fault reporting.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category LED Drivers
Pins 17

CAD (KiCad official)

  • Symbol: TPS61181ARTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps61181arter-etched.step / tps61181arter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61181arter.step / tps61181arter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 a22c966358df4bb3, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF