main
Ray
Publish 0.1.0
41784b8
TPS61165DBVT
Texas Instruments · LED Drivers · SOT-23-6
TPS61165DBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin for the IC, connect to a supply voltage between 3 V and 18 V. |
| 2 | CTRL | input | Control pin of the boost converter, a multifunctional pin used for enable control, PWM dimming and digital (EasyScale) dimming. |
| 3 | SW | passive | Switching node of the device; connect the switched side of the inductor here, also used to sense output voltage for open LED protection (40 V rated). |
| 4 | GND | power_in | Ground pin. |
| 5 | COMP | output | Output of the transconductance error amplifier; connect an external capacitor to this pin to compensate the converter. |
| 6 | FB | input | Feedback pin for current; connect the sense resistor from FB to GND (regulated to 200 mV). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VIN | VIN | -0.3 | 20 | V | 4 | ||
| Voltage on CTRL | -0.3 | 20 | V | 4 | |||
| Voltage on FB and COMP | -0.3 | 3 | V | 4 | |||
| Voltage on SW | -0.3 | 40 | V | 4 | |||
| Operating junction temperature (abs max) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage range | VI | 3 | 18 | V | 4 | ||
| Output voltage range | VO | 38 | V | minimum is VIN | 4 | ||
| Inductor | L | 10 | 22 | μH | 4 | ||
| PWM dimming frequency | fdim | 5 | 100 | kHz | 4 | ||
| Input capacitor | CIN | 1 | μF | 4 | |||
| Output capacitor | CO | 1 | 10 | μF | 4 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 210.1 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 46.8 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-board thermal resistance | RθJB | 56.7 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-top characterization parameter | ψJT | 0.5 | °C/W | DBV (SOT-23) | 4 | ||
| Junction-to-board characterization parameter | ψJB | 50.2 | °C/W | DBV (SOT-23) | 4 | ||
| Input voltage range | VI | 3 | 18 | V | 5 | ||
| Operating quiescent current into VIN | IQ | 2.3 | mA | Device PWM switching no load | 5 | ||
| Shutdown current | ISD | 1 | μA | CRTL=GND, VIN = 4.2 V | 5 | ||
| Undervoltage lockout threshold | UVLO | 2.2 | 2.5 | V | VIN falling | 5 | |
| CTRL logic high voltage | V(CTRLh) | 1.2 | V | VIN = 3 V to 18 V | 5 | ||
| CTRL logic low voltage | V(CTRLl) | 0.4 | V | VIN = 3 V to 18 V | 5 | ||
| CTRL pull down resistor | R(CTRL) | 400 | 800 | 1600 | kΩ | 5 | |
| Voltage feedback regulation voltage | VREF | 196 | 200 | 204 | mV | 5 | |
| Feedback regulation voltage under brightness control | V(REF_PWM) | 47 | 50 | 53 | mV | VFB = 50 mV | 5 |
| Feedback regulation voltage under brightness control | V(REF_PWM) | 17 | 20 | 23 | mV | VFB = 20 mV | 5 |
| Voltage feedback input bias current | IFB | 2 | μA | VFB = 200 mV | 5 | ||
| Oscillator frequency | fS | 1 | 1.2 | 1.5 | MHz | 5 | |
| Maximum duty cycle | Dmax | 90 | 93 | % | VFB = 100 mV | 5 | |
| Error amplifier transconductance | Gea | 240 | 320 | 400 | umho | 5 | |
| N-channel MOSFET on-resistance | RDS(ON) | 0.3 | 0.6 | Ω | VIN = 3.6 V | 5 | |
| N-channel MOSFET on-resistance | RDS(ON) | 0.7 | Ω | VIN = 3.0 V | 5 | ||
| N-channel leakage current | ILN_NFET | 1 | μA | VSW = 35 V, TA = 25°C | 5 | ||
| N-Channel MOSFET current limit | ILIM | 0.96 | 1.2 | 1.44 | A | D = Dmax | 5 |
| Open LED protection threshold | Vovp | 37 | 38 | 39 | V | Measured on the SW pin | 5 |
| Easy Scale detection time | tes_det | 260 | μs | CTRL pin low | 5 | ||
| Easy Scale detection delay | tes_delay | 100 | μs | 5 | |||
| Easy Scale detection window time | tes_win | 1 | ms | Measured from CTRL high | 5 | ||
| CTRL pulse width to shutdown | toff | 2.5 | ms | CTRL high to low | 5 | ||
| Thermal shutdown threshold | Tshutdown | 160 | °C | 5 | |||
| Thermal shutdown hysteresis | Thysteresis | 15 | °C | 5 | |||
| Start time of program stream | tstart | 2 | μs | 6 | |||
| End time of program stream | tEOS | 2 | 360 | μs | 6 | ||
| High time low bit | tH_LB | 2 | 180 | μs | Logic 0 | 6 | |
| Low time high bit | tL_HB | 2 | 180 | μs | Logic 1 | 6 | |
| Acknowledge output voltage low | VACKNL | 0.4 | V | Open drain, Rpullup =15 kΩ to VIN | 6 | ||
| Duration of acknowledge condition | tACKN | 512 | μs | See (1) | 6 |
CAD (KiCad official)
- Symbol:
TPS61165DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps61165dbvt-etched.step/tps61165dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61165dbvt.step/tps61165dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
bb0e9f995c5f8e0b, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS61165DBVT
**Texas Instruments** · LED Drivers · SOT-23-6
TPS61165DBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin for the IC, connect to a supply voltage between 3 V and 18 V. |
| 2 | CTRL | input | Control pin of the boost converter, a multifunctional pin used for enable control, PWM dimming and digital (EasyScale) dimming. |
| 3 | SW | passive | Switching node of the device; connect the switched side of the inductor here, also used to sense output voltage for open LED protection (40 V rated). |
| 4 | GND | power_in | Ground pin. |
| 5 | COMP | output | Output of the transconductance error amplifier; connect an external capacitor to this pin to compensate the converter. |
| 6 | FB | input | Feedback pin for current; connect the sense resistor from FB to GND (regulated to 200 mV). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VIN | VIN | -0.3 | | 20 | V | | 4 |
| Voltage on CTRL | | -0.3 | | 20 | V | | 4 |
| Voltage on FB and COMP | | -0.3 | | 3 | V | | 4 |
| Voltage on SW | | -0.3 | | 40 | V | | 4 |
| Operating junction temperature (abs max) | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Input voltage range | VI | 3 | | 18 | V | | 4 |
| Output voltage range | VO | | | 38 | V | minimum is VIN | 4 |
| Inductor | L | 10 | | 22 | μH | | 4 |
| PWM dimming frequency | fdim | 5 | | 100 | kHz | | 4 |
| Input capacitor | CIN | 1 | | | μF | | 4 |
| Output capacitor | CO | 1 | | 10 | μF | | 4 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 210.1 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 46.8 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-board thermal resistance | RθJB | | 56.7 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-top characterization parameter | ψJT | | 0.5 | | °C/W | DBV (SOT-23) | 4 |
| Junction-to-board characterization parameter | ψJB | | 50.2 | | °C/W | DBV (SOT-23) | 4 |
| Input voltage range | VI | 3 | | 18 | V | | 5 |
| Operating quiescent current into VIN | IQ | | | 2.3 | mA | Device PWM switching no load | 5 |
| Shutdown current | ISD | | | 1 | μA | CRTL=GND, VIN = 4.2 V | 5 |
| Undervoltage lockout threshold | UVLO | | 2.2 | 2.5 | V | VIN falling | 5 |
| CTRL logic high voltage | V(CTRLh) | 1.2 | | | V | VIN = 3 V to 18 V | 5 |
| CTRL logic low voltage | V(CTRLl) | | | 0.4 | V | VIN = 3 V to 18 V | 5 |
| CTRL pull down resistor | R(CTRL) | 400 | 800 | 1600 | kΩ | | 5 |
| Voltage feedback regulation voltage | VREF | 196 | 200 | 204 | mV | | 5 |
| Feedback regulation voltage under brightness control | V(REF_PWM) | 47 | 50 | 53 | mV | VFB = 50 mV | 5 |
| Feedback regulation voltage under brightness control | V(REF_PWM) | 17 | 20 | 23 | mV | VFB = 20 mV | 5 |
| Voltage feedback input bias current | IFB | | | 2 | μA | VFB = 200 mV | 5 |
| Oscillator frequency | fS | 1 | 1.2 | 1.5 | MHz | | 5 |
| Maximum duty cycle | Dmax | 90 | 93 | | % | VFB = 100 mV | 5 |
| Error amplifier transconductance | Gea | 240 | 320 | 400 | umho | | 5 |
| N-channel MOSFET on-resistance | RDS(ON) | | 0.3 | 0.6 | Ω | VIN = 3.6 V | 5 |
| N-channel MOSFET on-resistance | RDS(ON) | | | 0.7 | Ω | VIN = 3.0 V | 5 |
| N-channel leakage current | ILN_NFET | | | 1 | μA | VSW = 35 V, TA = 25°C | 5 |
| N-Channel MOSFET current limit | ILIM | 0.96 | 1.2 | 1.44 | A | D = Dmax | 5 |
| Open LED protection threshold | Vovp | 37 | 38 | 39 | V | Measured on the SW pin | 5 |
| Easy Scale detection time | tes_det | | | 260 | μs | CTRL pin low | 5 |
| Easy Scale detection delay | tes_delay | | | 100 | μs | | 5 |
| Easy Scale detection window time | tes_win | | | 1 | ms | Measured from CTRL high | 5 |
| CTRL pulse width to shutdown | toff | | | 2.5 | ms | CTRL high to low | 5 |
| Thermal shutdown threshold | Tshutdown | | 160 | | °C | | 5 |
| Thermal shutdown hysteresis | Thysteresis | | 15 | | °C | | 5 |
| Start time of program stream | tstart | 2 | | | μs | | 6 |
| End time of program stream | tEOS | 2 | | 360 | μs | | 6 |
| High time low bit | tH_LB | 2 | | 180 | μs | Logic 0 | 6 |
| Low time high bit | tL_HB | 2 | | 180 | μs | Logic 1 | 6 |
| Acknowledge output voltage low | VACKNL | | | 0.4 | V | Open drain, Rpullup =15 kΩ to VIN | 6 |
| Duration of acknowledge condition | tACKN | | | 512 | μs | See (1) | 6 |
## CAD (KiCad official)
- Symbol: `TPS61165DBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `tps61165dbvt-etched.step` / `tps61165dbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61165dbvt.step` / `tps61165dbvt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps61165.pdf) (38 pp, sha256 `bb0e9f995c5f8e0b`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps61165dbvt-datasheet.pdf)