Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS61165DBVT

Texas Instruments · LED Drivers · SOT-23-6

TPS61165DBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin for the IC, connect to a supply voltage between 3 V and 18 V.
2 CTRL input Control pin of the boost converter, a multifunctional pin used for enable control, PWM dimming and digital (EasyScale) dimming.
3 SW passive Switching node of the device; connect the switched side of the inductor here, also used to sense output voltage for open LED protection (40 V rated).
4 GND power_in Ground pin.
5 COMP output Output of the transconductance error amplifier; connect an external capacitor to this pin to compensate the converter.
6 FB input Feedback pin for current; connect the sense resistor from FB to GND (regulated to 200 mV).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Nixie Tube Driver/LED Driver
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage on VIN VIN -0.3 20 V 4
Voltage on CTRL -0.3 20 V 4
Voltage on FB and COMP -0.3 3 V 4
Voltage on SW -0.3 40 V 4
Operating junction temperature (abs max) TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage range VI 3 18 V 4
Output voltage range VO 38 V minimum is VIN 4
Inductor L 10 22 μH 4
PWM dimming frequency fdim 5 100 kHz 4
Input capacitor CIN 1 μF 4
Output capacitor CO 1 10 μF 4
Operating ambient temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 210.1 °C/W DBV (SOT-23) 4
Junction-to-case (top) thermal resistance RθJC(top) 46.8 °C/W DBV (SOT-23) 4
Junction-to-board thermal resistance RθJB 56.7 °C/W DBV (SOT-23) 4
Junction-to-top characterization parameter ψJT 0.5 °C/W DBV (SOT-23) 4
Junction-to-board characterization parameter ψJB 50.2 °C/W DBV (SOT-23) 4
Input voltage range VI 3 18 V 5
Operating quiescent current into VIN IQ 2.3 mA Device PWM switching no load 5
Shutdown current ISD 1 μA CRTL=GND, VIN = 4.2 V 5
Undervoltage lockout threshold UVLO 2.2 2.5 V VIN falling 5
CTRL logic high voltage V(CTRLh) 1.2 V VIN = 3 V to 18 V 5
CTRL logic low voltage V(CTRLl) 0.4 V VIN = 3 V to 18 V 5
CTRL pull down resistor R(CTRL) 400 800 1600 kΩ 5
Voltage feedback regulation voltage VREF 196 200 204 mV 5
Feedback regulation voltage under brightness control V(REF_PWM) 47 50 53 mV VFB = 50 mV 5
Feedback regulation voltage under brightness control V(REF_PWM) 17 20 23 mV VFB = 20 mV 5
Voltage feedback input bias current IFB 2 μA VFB = 200 mV 5
Oscillator frequency fS 1 1.2 1.5 MHz 5
Maximum duty cycle Dmax 90 93 % VFB = 100 mV 5
Error amplifier transconductance Gea 240 320 400 umho 5
N-channel MOSFET on-resistance RDS(ON) 0.3 0.6 Ω VIN = 3.6 V 5
N-channel MOSFET on-resistance RDS(ON) 0.7 Ω VIN = 3.0 V 5
N-channel leakage current ILN_NFET 1 μA VSW = 35 V, TA = 25°C 5
N-Channel MOSFET current limit ILIM 0.96 1.2 1.44 A D = Dmax 5
Open LED protection threshold Vovp 37 38 39 V Measured on the SW pin 5
Easy Scale detection time tes_det 260 μs CTRL pin low 5
Easy Scale detection delay tes_delay 100 μs 5
Easy Scale detection window time tes_win 1 ms Measured from CTRL high 5
CTRL pulse width to shutdown toff 2.5 ms CTRL high to low 5
Thermal shutdown threshold Tshutdown 160 °C 5
Thermal shutdown hysteresis Thysteresis 15 °C 5
Start time of program stream tstart 2 μs 6
End time of program stream tEOS 2 360 μs 6
High time low bit tH_LB 2 180 μs Logic 0 6
Low time high bit tL_HB 2 180 μs Logic 1 6
Acknowledge output voltage low VACKNL 0.4 V Open drain, Rpullup =15 kΩ to VIN 6
Duration of acknowledge condition tACKN 512 μs See (1) 6

CAD (KiCad official)

  • Symbol: TPS61165DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps61165dbvt-etched.step / tps61165dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61165dbvt.step / tps61165dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 bb0e9f995c5f8e0b, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF