TPS61100PWR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps61100pwr",
  "title": "TPS61100PWR",
  "brief": "Texas Instruments DC-DC Converters, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps61100pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS61100PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps61100.pdf",
    "parts": {
      "symbol": "tps61100pwr.kicad_sym",
      "footprint": "tps61100pwr.kicad_mod",
      "model_3d": "tps61100pwr-hero.glb",
      "model_3d_plain": "tps61100pwr.glb",
      "model_3d_step": "tps61100pwr-etched.step",
      "model_3d_step_plain": "tps61100pwr.step",
      "lbr": "tps61100pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2658860",
      "digikey": "TPS61100PWR-ND",
      "mouser": "595-TPS61100PWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T04:29:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TPS61100PWR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS61100PWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBAT",
        "type": "power_in",
        "description": "Supply pin; the device starts up from VBAT with an undervoltage lockout at approximately 0.7 V and operates with supply voltages down to 0.8 V."
      },
      {
        "number": "2",
        "name": "LBI",
        "type": "input",
        "description": "Low battery comparator input, with the comparator enabled together with EN."
      },
      {
        "number": "3",
        "name": "ENPB",
        "type": "input",
        "description": "Pushbutton boost-enable input: 0 (GND) enables the converter and 1 (VBAT) disables it, and a low signal forces start-up while EN is low."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Boost-enable input: 1 (VBAT) enables the converter and 0 (GND) puts it into shutdown with the load disconnected from the battery."
      },
      {
        "number": "5",
        "name": "ADEN",
        "type": "input",
        "description": "Auto-discharge enable: 1 (VBAT) enables discharge of the output capacitors during shutdown and 0 (GND) disables it."
      },
      {
        "number": "6",
        "name": "LDOSENSE",
        "type": "input",
        "description": "LDO feedback input for voltage adjustment; it must be connected to LDOOUT in fixed-output-voltage versions."
      },
      {
        "number": "7",
        "name": "LDOEN",
        "type": "input",
        "description": "LDO-enable input: 1 (VBAT) enables the LDO and 0 (GND) disables it."
      },
      {
        "number": "8",
        "name": "LDOIN",
        "type": "input",
        "description": "LDO input pin that supplies the integrated 120 mA LDO."
      },
      {
        "number": "9",
        "name": "LDOOUT",
        "type": "output",
        "description": "LDO output pin of the integrated second-output regulator."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Control/logic ground and the reference for all control functions; it must be connected to PGND at only one point close to this pin."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for the boost NMOS switch, kept separate from GND to avoid ground shift from high switch currents."
      },
      {
        "number": "12",
        "name": "LBO1",
        "type": "output",
        "description": "Low battery comparator output 1, an open-drain output."
      },
      {
        "number": "13",
        "name": "LBO2",
        "type": "output",
        "description": "Low battery comparator output 2, an open-drain output."
      },
      {
        "number": "14",
        "name": "SWN",
        "type": "input",
        "description": "Boost switch input connected to the internal boost switch node; pin 14 and pin 16 are both SWN and must both be connected."
      },
      {
        "number": "15",
        "name": "PGOOD",
        "type": "output",
        "description": "Boost output power-good open-drain output: 1 indicates good and 0 indicates failure."
      },
      {
        "number": "16",
        "name": "SWN",
        "type": "input",
        "description": "Boost switch input connected to the internal boost switch node; pin 16 and pin 14 are both SWN and must both be connected."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on this pin."
      },
      {
        "number": "18",
        "name": "SKIPEN",
        "type": "input",
        "description": "Power-save mode enable: 1 (VBAT) enables power save mode and 0 (GND) disables it."
      },
      {
        "number": "19",
        "name": "VOUT",
        "type": "output",
        "description": "Boost converter output; the adjustable output is set up to 5.5 V by the external feedback divider."
      },
      {
        "number": "20",
        "name": "FB",
        "type": "input",
        "description": "Boost-voltage feedback input for adjustable-output versions."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types GND (pin 10) and PGND (pin 11) are listed as I/O in the datasheet; they are typed power_in; The VOUT description cites the adjustable output limit of 5.5 V from the Features list (page 1), not; The PW pinout diagram text is scrambled in extraction. Pin assignments were taken from the Terminal "
        ],
        "pages_sent": 9,
        "cost_usd": 0.0545,
        "at": "2026-10-12T04:29:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps61100.pdf",
        "pages": 38,
        "sha256": "bc3d483e43501243",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61100pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61100pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a9fae1fe1b27062966860b745aa54b5775971913a027610641dfa45a693cb82f",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Power Management (PMIC)",
      "Pins": "20"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "bc3d483e43501243",
      "rows": [
        {
          "name": "Input voltage range on VBAT, LBI, SKIPEN, EN, ENPB, ADEN, FB, LDOEN",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Input voltage range on SWN, VOUT, LDOIN, LDOOUT, LDOSENSE, PGOOD, LBO1, LBO2",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature range",
          "symbol": "TA",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Lead temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "1.6 mm from case for 10 s",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage at VBAT",
          "symbol": "VI",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.8,
          "typ": null,
          "max": 3.3,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Boost inductor",
          "symbol": "L",
          "kind": "recommended_operating",
          "unit": "µH",
          "min": 4.7,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Boost input capacitor",
          "symbol": "Ci",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Boost output capacitor",
          "symbol": "Co",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": 22,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "LDO input capacitor",
          "symbol": "Ci",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "LDO output capacitor",
          "symbol": "Co",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": 1,
          "typ": null,
          "max": 2.2,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Operating virtual junction temperature",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance, junction to ambient (20-pin TSSOP, PW)",
          "symbol": "RΘJA",
          "kind": "thermal",
          "unit": "K/W",
          "min": null,
          "typ": 155,
          "max": null,
          "conditions": "PW (TSSOP-20) package",
          "source_page": 25,
          "source": "datasheet"
        },
        {
          "name": "Input voltage for start-up",
          "symbol": "VI(b)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.85,
          "max": 1.1,
          "conditions": "RL >= 66 Ω at Vo = 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Input voltage once started",
          "symbol": "VI(b)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.8,
          "typ": null,
          "max": 3.3,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Output voltage",
          "symbol": "Vo(b)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.5,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Minimum possible output power",
          "symbol": "",
          "kind": "electrical",
          "unit": "mW",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "PW package, VBAT >= 1.5 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Reference voltage",
          "symbol": "Vref",
          "kind": "electrical",
          "unit": "mV",
          "min": 485,
          "typ": 500,
          "max": 515,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Oscillator frequency",
          "symbol": "f",
          "kind": "electrical",
          "unit": "kHz",
          "min": 320,
          "typ": 500,
          "max": 800,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Switch current limit",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": 1200,
          "typ": 1500,
          "max": 1800,
          "conditions": "Vo = 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Startup current limit",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 610,
          "max": null,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Boost switch on resistance",
          "symbol": "",
          "kind": "electrical",
          "unit": "mΩ",
          "min": null,
          "typ": 180,
          "max": 300,
          "conditions": "Vo = 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Sync switch on resistance",
          "symbol": "",
          "kind": "electrical",
          "unit": "mΩ",
          "min": null,
          "typ": 180,
          "max": 300,
          "conditions": "Vo = 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Total accuracy (boost output)",
          "symbol": "",
          "kind": "tolerance",
          "unit": "%",
          "min": -3,
          "typ": null,
          "max": 3,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Auto discharge switch resistance (boost)",
          "symbol": "",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 400,
          "max": null,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Boost quiescent current into VBAT",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 25,
          "max": 40,
          "conditions": "IO = 0 mA, VEN = VBAT = 3.3 V, Vo = 3.3 V, ENLDO = 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Boost quiescent current into VOUT",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 12,
          "max": 20,
          "conditions": "IO = 0 mA, VEN = VBAT = 3.3 V, Vo = 3.3 V, ENLDO = 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Boost shutdown current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.5,
          "max": 5,
          "conditions": "VEN = 0 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO input voltage range",
          "symbol": "VI(LDO)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.5,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO output voltage",
          "symbol": "Vo(LDO)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.9,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO output current",
          "symbol": "Io(LDO)",
          "kind": "electrical",
          "unit": "mA",
          "min": 120,
          "typ": null,
          "max": 270,
          "conditions": "VI >= 1.8 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO output current",
          "symbol": "Io(LDO)",
          "kind": "electrical",
          "unit": "mA",
          "min": 80,
          "typ": null,
          "max": null,
          "conditions": "VI < 1.8 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO short circuit current limit",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 500,
          "max": null,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Minimum voltage drop (LDO)",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "VI >= 1.8 V, Io(LDO) = 120 mA",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Total accuracy (LDO output)",
          "symbol": "",
          "kind": "tolerance",
          "unit": "%",
          "min": -3,
          "typ": null,
          "max": 3,
          "conditions": "Io >= 1 mA",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Line regulation (LDO)",
          "symbol": "",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": null,
          "max": 0.6,
          "conditions": "LDOIN change from 1.8 V to 2.6 V at 100 mA",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Load regulation (LDO)",
          "symbol": "",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": null,
          "max": 0.6,
          "conditions": "Load change from 10% to 90%",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Auto discharge switch resistance (LDO)",
          "symbol": "",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 400,
          "max": null,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO quiescent current (LDOIN row)",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 27,
          "max": 40,
          "conditions": "LDOIN = 7 V, VBAT = 1.2 V, EN = 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO quiescent current (VBAT row)",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 27,
          "max": 40,
          "conditions": "LDOIN = 7 V, VBAT = 1.2 V, EN = 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LDO shutdown current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 1,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "LBI1 voltage threshold",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "mV",
          "min": 390,
          "typ": 400,
          "max": 410,
          "conditions": "VLBI voltage decreasing",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBI2 voltage threshold",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "mV",
          "min": 440,
          "typ": 450,
          "max": 460,
          "conditions": "VLBI voltage decreasing",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBI3 voltage threshold",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "mV",
          "min": 490,
          "typ": 500,
          "max": 510,
          "conditions": "VLBI voltage decreasing",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBI input hysteresis",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBI input current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "EN = Vbat or GND",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBO1 output low voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.04,
          "max": 0.4,
          "conditions": "Vo = 3.3 V, IOL = 10 µA",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBO1 output leakage current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "VLBO = 3.3 V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBO2 output low voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.04,
          "max": 0.4,
          "conditions": "Vo = 3.3 V, IOL = 10 µA",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "LBO2 output leakage current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "VLBO = 3.3 V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "EN, ENPB, LDOEN, SKIPEN and ADEN input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "× VBAT",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "EN, ENPB, LDOEN, SKIPEN and ADEN input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "× VBAT",
          "min": 0.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "EN, ENPB, LDOEN, SKIPEN and ADEN input clamped current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "Clamped on GND or VBAT",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Powergood threshold",
          "symbol": "",
          "kind": "electrical",
          "unit": "xVo",
          "min": 0.9,
          "typ": 0.92,
          "max": 0.95,
          "conditions": "Vo = 3.3 V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Powergood output low voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.04,
          "max": 0.4,
          "conditions": "Vo = 3.3 V, IOL = 10 µA",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Powergood output leakage current",
          "symbol": "",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Overtemperature protection",
          "symbol": "",
          "kind": "electrical",
          "unit": "°C",
          "min": null,
          "typ": 140,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Overtemperature hysteresis",
          "symbol": "",
          "kind": "electrical",
          "unit": "°C",
          "min": null,
          "typ": 20,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Powergood delay",
          "symbol": "",
          "kind": "electrical",
          "unit": "µs",
          "min": null,
          "typ": 30,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps61100pwr"
  ],
  "discovery_pitch": "TPS61100PWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61100pwr.kicad_sym",
    "tps61100pwr.kicad_mod",
    "tps61100pwr.glb",
    "tps61100pwr.step",
    "tps61100pwr.lbr",
    "docs/hero.png",
    "docs/tps61100pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps61100pwr-hero.glb",
    "tps61100pwr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}