main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps61094dssr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps61094dssr: viewers · Ray
package.json tps61094dssr: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
page.json tps61094dssr: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
README.md tps61094dssr: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray
tps61094dssr-etched.fit.json tps61094dssr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61094dssr-etched.glb tps61094dssr: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
tps61094dssr-etched.step tps61094dssr: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) · Ray
tps61094dssr.glb plain STEP: one free product with face colours (generated model was nested; tscircuit read it white) · Ray
tps61094dssr.kicad_mod Publish 0.1.0 · Ray
tps61094dssr.kicad_sym tps61094dssr: factory component page (tier=lcsc) · Ray
tps61094dssr.lbr tps61094dssr: factory component page (tier=lcsc) · Ray
tps61094dssr.step plain STEP: one free product with face colours (generated model was nested; tscircuit read it white) · Ray

TPS61094DSSR

Texas Instruments · DC-DC Converters · WSON-12-EP(2x3)

TPS61094DSSR from Texas Instruments, in a WSON-12-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OSEL input Boost output voltage selection pin; connect a resistor to ground to select one of sixteen voltages in range 2.7V to 5.4V.
2 MODE input Operation mode selection pin used with EN pin to set device operation mode per mode selection table.
3 EN input Operation mode selection pin used with MODE pin to set device operation mode per mode selection table.
4 VIN power_in IC power supply input with recommended operating voltage range 0.7V to 5.5V.
5 SW output Switching node pin connected to the drain of internal low-side power MOSFET and source of internal high-side power MOSFET.
6 SUP input Buck converter output pin to sense the supercap voltage with recommended operating range 2.0V to 5.4V.
7 PGND power_in Power ground return path for the device.
8 AGND power_in Signal ground return path for the device.
9 VOUT power_out Output of device providing regulated power with programmable boost mode range 2.7V to 5.4V.
10 VOUT power_out Output of device providing regulated power with programmable boost mode range 2.7V to 5.4V.
11 ICHG input Buck charging current selection pin; connect a resistor to ground to select one of sixteen currents in range 2.5mA to 600mA.
12 VCHG input Buck charging voltage selection pin; connect a resistor to ground to select one of sixteen voltages in range 1.7V to 5.4V.
13 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-12-EP(2x3)
Category Power Management (PMIC)
Pins 13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VIN, VOUT, SW, SUP, MODE, EN, OSEL, VCHG, ICHG -0.3 6.5 V 4
SW spike voltage -0.7 8 V SW spike at 10 ns 4
SW spike voltage -0.7 9 V SW spike at 1 ns 4
Operating junction temperature TJ -40 125 °C 4
Storage temperature Tstg -65 150 °C 4
VIN input voltage VIN 0.7 5.5 V 4
VOUT boost output voltage VOUT 1.8 5.4 V 4
VSUP buck output voltage VSUP 2 5.4 V 4
Junction temperature TJ -40 125 °C 4
Effective inductance L 0.7 2.2 2.86 µH 4
VIN input voltage range VIN 0.7 5.5 V 5
Boost output voltage setting range VOUT 2.7 5.4 V 16 options 5
Buck charge voltage range VSUP 1.7 5.4 V 16 options 5
Undervoltage lockout threshold at VOUT pin (rising) VOUT_UVLO 1.6 1.7 1.8 V VOUT rising 5
Undervoltage lockout threshold at VOUT pin (falling) VOUT_UVLO 1.5 1.6 1.7 V VOUT falling 5
Output voltage accuracy in Boost mode (PWM) VOUT_PWM_ACY -2 0 2 % VIN = 1.8 V, PWM mode 5
Output short circuit current ISHORT 190 300 500 mA 5
Charge termination voltage accuracy in Buck mode VSUP_ACY -2 0 2 % 6
Charge termination voltage hysteresis in Buck mode VSUP_HYS 50 75 100 mV 6
Programmable charging current options ICHG_SET 2.5 600 mA 15 options; IC enabled, no load, VIN = 5 V, VSUP = 0.8 V to 4 V, TJ up to 85°C 6
ICHG setting charging current accuracy (ICHG = 2.5 mA or 5 mA) ICHG_ACY -2 0 2 mA ICHG = 2.5 mA or 5 mA; VIN = 5 V, VSUP = 0.8 V to 4 V 6
ICHG setting charging current accuracy (ICHG ≥ 10 mA) ICHG_ACY -20 0 20 % ICHG ≥ 10 mA; VIN = 5 V, VSUP = 0.8 V to 4 V 6
High side switch valley current limit in Boost mode ISW_LIM 1.7 2 2.6 A 6
Enter Bypass mode threshold (VIN above VOUT target) VBYPASS 50 100 150 mV Enter Bypass mode when VIN ≥ VOUT_TARGET + VBY_PASS 6
Thermal resistance, junction-to-ambient RθJA 58.4 °C/W DSS 12-PINS 4
Thermal resistance, junction-to-ambient RθJA 55.3 °C/W Standard EVM 4
Thermal resistance, junction-to-case (top) RθJC(top) 23 °C/W DSS 12-PINS 4
Thermal resistance, junction-to-board RθJB 55.6 °C/W DSS 12-PINS 4
Junction-to-top characterization parameter ΨJT 1.6 °C/W DSS 12-PINS 4
Junction-to-top characterization parameter ΨJT 1.5 °C/W Standard EVM 4
Junction-to-board characterization parameter YJB 22.9 °C/W DSS 12-PINS 4
Junction-to-board characterization parameter YJB 22.3 °C/W Standard EVM 4
Thermal resistance, junction-to-case (bottom) RθJC(bot) 10 °C/W DSS 12-PINS 4

CAD (KiCad official)

  • Symbol: TPS61094DSSR
  • Footprint: Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65
  • 3D model: WSON-12-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps61094dssr-etched.step / tps61094dssr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61094dssr.step / tps61094dssr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 a1cff3d94efe598f, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF