3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61094DSSR
Texas Instruments · DC-DC Converters · WSON-12-EP(2x3)
TPS61094DSSR from Texas Instruments, in a WSON-12-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OSEL | input | Boost output voltage selection pin; connect a resistor to ground to select one of sixteen voltages in range 2.7V to 5.4V. |
| 2 | MODE | input | Operation mode selection pin used with EN pin to set device operation mode per mode selection table. |
| 3 | EN | input | Operation mode selection pin used with MODE pin to set device operation mode per mode selection table. |
| 4 | VIN | power_in | IC power supply input with recommended operating voltage range 0.7V to 5.5V. |
| 5 | SW | output | Switching node pin connected to the drain of internal low-side power MOSFET and source of internal high-side power MOSFET. |
| 6 | SUP | input | Buck converter output pin to sense the supercap voltage with recommended operating range 2.0V to 5.4V. |
| 7 | PGND | power_in | Power ground return path for the device. |
| 8 | AGND | power_in | Signal ground return path for the device. |
| 9 | VOUT | power_out | Output of device providing regulated power with programmable boost mode range 2.7V to 5.4V. |
| 10 | VOUT | power_out | Output of device providing regulated power with programmable boost mode range 2.7V to 5.4V. |
| 11 | ICHG | input | Buck charging current selection pin; connect a resistor to ground to select one of sixteen currents in range 2.5mA to 600mA. |
| 12 | VCHG | input | Buck charging voltage selection pin; connect a resistor to ground to select one of sixteen voltages in range 1.7V to 5.4V. |
| 13 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-12-EP(2x3) |
| Category | Power Management (PMIC) |
| Pins | 13 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VIN, VOUT, SW, SUP, MODE, EN, OSEL, VCHG, ICHG | -0.3 | 6.5 | V | 4 | |||
| SW spike voltage | -0.7 | 8 | V | SW spike at 10 ns | 4 | ||
| SW spike voltage | -0.7 | 9 | V | SW spike at 1 ns | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN input voltage | VIN | 0.7 | 5.5 | V | 4 | ||
| VOUT boost output voltage | VOUT | 1.8 | 5.4 | V | 4 | ||
| VSUP buck output voltage | VSUP | 2 | 5.4 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Effective inductance | L | 0.7 | 2.2 | 2.86 | µH | 4 | |
| VIN input voltage range | VIN | 0.7 | 5.5 | V | 5 | ||
| Boost output voltage setting range | VOUT | 2.7 | 5.4 | V | 16 options | 5 | |
| Buck charge voltage range | VSUP | 1.7 | 5.4 | V | 16 options | 5 | |
| Undervoltage lockout threshold at VOUT pin (rising) | VOUT_UVLO | 1.6 | 1.7 | 1.8 | V | VOUT rising | 5 |
| Undervoltage lockout threshold at VOUT pin (falling) | VOUT_UVLO | 1.5 | 1.6 | 1.7 | V | VOUT falling | 5 |
| Output voltage accuracy in Boost mode (PWM) | VOUT_PWM_ACY | -2 | 0 | 2 | % | VIN = 1.8 V, PWM mode | 5 |
| Output short circuit current | ISHORT | 190 | 300 | 500 | mA | 5 | |
| Charge termination voltage accuracy in Buck mode | VSUP_ACY | -2 | 0 | 2 | % | 6 | |
| Charge termination voltage hysteresis in Buck mode | VSUP_HYS | 50 | 75 | 100 | mV | 6 | |
| Programmable charging current options | ICHG_SET | 2.5 | 600 | mA | 15 options; IC enabled, no load, VIN = 5 V, VSUP = 0.8 V to 4 V, TJ up to 85°C | 6 | |
| ICHG setting charging current accuracy (ICHG = 2.5 mA or 5 mA) | ICHG_ACY | -2 | 0 | 2 | mA | ICHG = 2.5 mA or 5 mA; VIN = 5 V, VSUP = 0.8 V to 4 V | 6 |
| ICHG setting charging current accuracy (ICHG ≥ 10 mA) | ICHG_ACY | -20 | 0 | 20 | % | ICHG ≥ 10 mA; VIN = 5 V, VSUP = 0.8 V to 4 V | 6 |
| High side switch valley current limit in Boost mode | ISW_LIM | 1.7 | 2 | 2.6 | A | 6 | |
| Enter Bypass mode threshold (VIN above VOUT target) | VBYPASS | 50 | 100 | 150 | mV | Enter Bypass mode when VIN ≥ VOUT_TARGET + VBY_PASS | 6 |
| Thermal resistance, junction-to-ambient | RθJA | 58.4 | °C/W | DSS 12-PINS | 4 | ||
| Thermal resistance, junction-to-ambient | RθJA | 55.3 | °C/W | Standard EVM | 4 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 23 | °C/W | DSS 12-PINS | 4 | ||
| Thermal resistance, junction-to-board | RθJB | 55.6 | °C/W | DSS 12-PINS | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 1.6 | °C/W | DSS 12-PINS | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 1.5 | °C/W | Standard EVM | 4 | ||
| Junction-to-board characterization parameter | YJB | 22.9 | °C/W | DSS 12-PINS | 4 | ||
| Junction-to-board characterization parameter | YJB | 22.3 | °C/W | Standard EVM | 4 | ||
| Thermal resistance, junction-to-case (bottom) | RθJC(bot) | 10 | °C/W | DSS 12-PINS | 4 |
CAD (KiCad official)
- Symbol:
TPS61094DSSR - Footprint:
Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 - 3D model: WSON-12-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps61094dssr-etched.step/tps61094dssr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61094dssr.step/tps61094dssr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
a1cff3d94efe598f, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).