← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# TPS61094DSSR++**Texas Instruments** · DC-DC Converters · WSON-12-EP(2x3)++TPS61094DSSR from Texas Instruments, in a WSON-12-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OSEL | input | Boost output voltage selection pin to select one of sixteen output voltages from 2.7V to 5.4V by connecting a resistor to ground. |+| 2 | MODE | input | Operation mode selection pin that works with EN pin to set device operating mode. |+| 3 | EN | input | Enable input pin that works with MODE pin to set device operating mode; has 800kΩ internal pulldown resistor. |+| 4 | VIN | power_in | IC power supply input with operating voltage range of 0.7V to 5.5V and UVLO threshold of 1.7V typical. |+| 5 | SW | output | Switching node connected to the drain of low-side MOSFET and source of high-side MOSFET, switching at 1MHz frequency. |+| 6 | SUP | output | Buck converter output for charging supercapacitor; configured from 1.7V to 5.4V termination voltage with internal sensing. |+| 7 | PGND | power_in | Power ground pin for power return path and thermal dissipation. |+| 8 | AGND | power_in | Signal ground pin for analog circuit reference. |+| 9 | VOUT | power_out | Output power node of boost/buck converter providing regulated voltage from 2.7V to 5.4V. |+| 10 | VOUT | power_out | Output power node of boost/buck converter providing regulated voltage from 2.7V to 5.4V. |+| 11 | ICHG | input | Charging current selection pin to select one of sixteen charging currents from 2.5mA to 600mA by connecting resistor to ground. |+| 12 | VCHG | input | Charging termination voltage selection pin to select one of sixteen voltages from 1.7V to 5.4V by connecting resistor to ground. |+| 13 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-12-EP(2x3) |+| Category | Power Management (PMIC) |+| Pins | 13 |++## CAD (KiCad official)++- Symbol: `TPS61094DSSR`+- Footprint: `Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65`+- 3D model: WSON-12-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `tps61094dssr-etched.step` / `tps61094dssr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61094dssr.step` / `tps61094dssr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61094) (41 pp, sha256 `a1cff3d94efe598f`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61094dssr-datasheet.pdf)
page.jsonadded+187@@ -0,0 +1,187 @@+{+ "slug": "tps61094dssr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps61094dssr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps61094dssr.kicad_sym",+ "tps61094dssr.kicad_mod",+ "tps61094dssr.glb",+ "tps61094dssr.step",+ "tps61094dssr.lbr",+ "docs/hero.png",+ "docs/tps61094dssr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS61094DSSR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-12-EP(2x3)",+ "pin_count": 13,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps61094",+ "parts": {+ "symbol": "tps61094dssr.kicad_sym",+ "footprint": "tps61094dssr.kicad_mod",+ "model_3d": "tps61094dssr-etched.glb",+ "model_3d_plain": "tps61094dssr.glb",+ "model_3d_step": "tps61094dssr-etched.step",+ "model_3d_step_plain": "tps61094dssr.step",+ "lbr": "tps61094dssr.lbr"+ },+ "distributor_links": {+ "lcsc": "C3034939",+ "digikey": "296-TPS61094DSSRTR-ND",+ "mouser": "595-TPS61094DSSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:45:44Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TPS61094DSSRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS61094DSSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OSEL",+ "type": "input",+ "description": "Boost output voltage selection pin to select one of sixteen output voltages from 2.7V to 5.4V by connecting a resistor to ground."+ },+ {+ "number": "2",+ "name": "MODE",+ "type": "input",+ "description": "Operation mode selection pin that works with EN pin to set device operating mode."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable input pin that works with MODE pin to set device operating mode; has 800kΩ internal pulldown resistor."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "IC power supply input with operating voltage range of 0.7V to 5.5V and UVLO threshold of 1.7V typical."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Switching node connected to the drain of low-side MOSFET and source of high-side MOSFET, switching at 1MHz frequency."+ },+ {+ "number": "6",+ "name": "SUP",+ "type": "output",+ "description": "Buck converter output for charging supercapacitor; configured from 1.7V to 5.4V termination voltage with internal sensing."+ },+ {+ "number": "7",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground pin for power return path and thermal dissipation."+ },+ {+ "number": "8",+ "name": "AGND",+ "type": "power_in",+ "description": "Signal ground pin for analog circuit reference."+ },+ {+ "number": "9",+ "name": "VOUT",+ "type": "power_out",+ "description": "Output power node of boost/buck converter providing regulated voltage from 2.7V to 5.4V."+ },+ {+ "number": "10",+ "name": "VOUT",+ "type": "power_out",+ "description": "Output power node of boost/buck converter providing regulated voltage from 2.7V to 5.4V."+ },+ {+ "number": "11",+ "name": "ICHG",+ "type": "input",+ "description": "Charging current selection pin to select one of sixteen charging currents from 2.5mA to 600mA by connecting resistor to ground."+ },+ {+ "number": "12",+ "name": "VCHG",+ "type": "input",+ "description": "Charging termination voltage selection pin to select one of sixteen voltages from 1.7V to 5.4V by connecting resistor to ground."+ },+ {+ "number": "13",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin SUP is marked as 'I' (Input) in the datasheet pin function table but described as 'Output of buc"+ ],+ "pages_sent": 41,+ "cost_usd": 0.394,+ "at": "2026-10-01T17:45:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps61094",+ "pages": 41,+ "sha256": "a1cff3d94efe598f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}