component
TPS61093DSKR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(2.5x2.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps61093dskr
7990492
TPS61093DSKR
Texas Instruments · DC-DC Converters · WSON-10-EP(2.5x2.5)
TPS61093DSKR from Texas Instruments, in a WSON-10-EP(2.5x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground of the IC. |
| 2 | VIN | power_in | IC supply voltage input, operating range 1.6 V to 6 V. |
| 3 | CP1 | bidirectional | Flying capacitor connection for internal charge pump, 10 nF typical. |
| 4 | CP2 | bidirectional | Flying capacitor connection for internal charge pump, 10 nF typical. |
| 5 | EN | input | Enable pin (HIGH = enabled); pulling low for 1 ms disables IC with <1 μA quiescent current. |
| 6 | SS | input | Soft start pin; RC network programs ramp timing with t_SS = C_SS × 0.5 V / 5 μA. |
| 7 | FB | input | Feedback input at 0.5 V regulation voltage; external resistor divider programs output voltage. |
| 8 | OUT | power_out | Isolation switch output; switch between OUT and VO provides input/output isolation during shutdown. |
| 9 | SW | bidirectional | PWM switching node where internal 1.2 MHz switch operates with 0.4 Ω typical on-resistance. |
| 10 | VO | power_out | Boost converter output, maximum 17 V with 19 V overvoltage protection threshold and 0.6 V hysteresis. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(2.5x2.5) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS61093DSKR - Footprint:
Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(2.5x2.5) (KiCad packages3D, STEP)
- 3D model files:
tps61093dskr-etched.step/tps61093dskr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61093dskr.step/tps61093dskr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
59da0cc0961da184, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS61093DSKR
**Texas Instruments** · DC-DC Converters · WSON-10-EP(2.5x2.5)
TPS61093DSKR from Texas Instruments, in a WSON-10-EP(2.5x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground of the IC. |
| 2 | VIN | power_in | IC supply voltage input, operating range 1.6 V to 6 V. |
| 3 | CP1 | bidirectional | Flying capacitor connection for internal charge pump, 10 nF typical. |
| 4 | CP2 | bidirectional | Flying capacitor connection for internal charge pump, 10 nF typical. |
| 5 | EN | input | Enable pin (HIGH = enabled); pulling low for 1 ms disables IC with <1 μA quiescent current. |
| 6 | SS | input | Soft start pin; RC network programs ramp timing with t_SS = C_SS × 0.5 V / 5 μA. |
| 7 | FB | input | Feedback input at 0.5 V regulation voltage; external resistor divider programs output voltage. |
| 8 | OUT | power_out | Isolation switch output; switch between OUT and VO provides input/output isolation during shutdown. |
| 9 | SW | bidirectional | PWM switching node where internal 1.2 MHz switch operates with 0.4 Ω typical on-resistance. |
| 10 | VO | power_out | Boost converter output, maximum 17 V with 19 V overvoltage protection threshold and 0.6 V hysteresis. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(2.5x2.5) |
| Category | Power Management (PMIC) |
| Pins | 11 |
## CAD (KiCad official)
- Symbol: `TPS61093DSKR`
- Footprint: `Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm`
- 3D model: WSON-10-EP(2.5x2.5) (KiCad packages3D, STEP)
- 3D model files: `tps61093dskr-etched.step` / `tps61093dskr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61093dskr.step` / `tps61093dskr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61093) (28 pp, sha256 `59da0cc0961da184`, retrieved 2026-09-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps61093dskr-datasheet.pdf)