main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps61093dskr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps61093dskr: viewers · Ray
package.json tps61093dskr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps61093dskr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps61093dskr · Ray
tps61093dskr-etched.fit.json tps61093dskr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61093dskr-etched.glb tps61093dskr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61093dskr-etched.step tps61093dskr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61093dskr.glb Publish 0.1.0 · Ray
tps61093dskr.kicad_mod Publish 0.1.0 · Ray
tps61093dskr.kicad_sym Publish 0.1.0 · Ray
tps61093dskr.lbr Publish 0.1.0 · Ray
tps61093dskr.step Publish 0.1.0 · Ray

TPS61093DSKR

Texas Instruments · DC-DC Converters · WSON-10-EP(2.5x2.5)

TPS61093DSKR from Texas Instruments, in a WSON-10-EP(2.5x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground of the IC.
2 VIN power_in IC supply voltage input, operating range 1.6 V to 6 V.
3 CP1 bidirectional Flying capacitor connection for internal charge pump, 10 nF typical.
4 CP2 bidirectional Flying capacitor connection for internal charge pump, 10 nF typical.
5 EN input Enable pin (HIGH = enabled); pulling low for 1 ms disables IC with <1 μA quiescent current.
6 SS input Soft start pin; RC network programs ramp timing with t_SS = C_SS × 0.5 V / 5 μA.
7 FB input Feedback input at 0.5 V regulation voltage; external resistor divider programs output voltage.
8 OUT power_out Isolation switch output; switch between OUT and VO provides input/output isolation during shutdown.
9 SW bidirectional PWM switching node where internal 1.2 MHz switch operates with 0.4 Ω typical on-resistance.
10 VO power_out Boost converter output, maximum 17 V with 19 V overvoltage protection threshold and 0.6 V hysteresis.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2.5x2.5)
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: TPS61093DSKR
  • Footprint: Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm
  • 3D model: WSON-10-EP(2.5x2.5) (KiCad packages3D, STEP)
  • 3D model files: tps61093dskr-etched.step / tps61093dskr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61093dskr.step / tps61093dskr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 59da0cc0961da184, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF