main
History Download
Ray tps61085dgkt: specified limits as data (metadata.characteristics, 37 rows from the datasheet) 206150b

TPS61085DGKT

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

TPS61085DGKT from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Compensation pin; output of transconductance error amplifier for external feedback network tuning with typical transconductance of 107 μA/V.
2 FB input Feedback input pin for output voltage regulation with nominal voltage of 1.238 V and input bias current of 0.1 μA typical.
3 EN input Enable input; high level (≥2 V) enables device, low level (≤0.5 V) disables with shutdown current of 1 μA maximum.
4 PGND power_in Power ground terminal for device return current.
5 SW output Switch output pin driving internal MOSFET with peak current limit of 2.0 A minimum and on-resistance of 0.13 Ω typical at VGS = 5 V.
6 IN power_in Input supply pin with voltage range of 2.3 V to 6 V and operating quiescent current of 70-100 μA typical.
7 FREQ input Frequency select input; connect to GND for 650 kHz or to IN for 1.2 MHz switching frequency selection.
8 SS output Soft-start output pin with constant charge current of 10 μA typical for external capacitor to minimize startup inrush current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2.3 6 V 4
Boost output voltage range VS 18.5 V Minimum printed as VIN + 0.5 V 4
Operating free-air temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range -0.3 7 V Pin IN 3
Voltage range on pins EN, FB, SS, FREQ, COMP -0.3 7 V 3
Voltage on pin SW -0.3 20 V 3
Operating junction temperature -40 150 °C 3
Storage temperature -65 150 °C 3
Input voltage range VIN 2.3 6 V 4
Boost output voltage VS 18.5 V Minimum printed as VIN + 0.5 V 4
Operating quiescent current into IN IQ 70 100 μA Device not switching, VFB = 1.3 V 4
Feedback regulation voltage VFB 1.23 1.238 1.246 V 4
N-channel MOSFET on-resistance rDS(on) 0.13 0.2 Ω VIN = VGS = 5 V, ISW = current limit 4
N-channel MOSFET on-resistance rDS(on) 0.15 0.24 Ω VIN = VGS = 3.3 V, ISW = current limit 4
SW leakage current Ilkg 10 µA EN = GND, VSW = 6 V; minimum printed as TBD 4
N-channel MOSFET current limit ILIM 2 2.6 3.2 A 4
Soft-start current ISS 7 10 13 μA VSS = 1.238 V 4
Oscillator frequency fS 0.9 1.2 1.5 MHz FREQ = VIN 4
Oscillator frequency fS 480 650 820 kHz FREQ = GND 4
Shutdown current into IN ISDVIN 1 μA EN = GND 4
Undervoltage lockout threshold UVLO 2.2 V VIN falling 4
Undervoltage lockout threshold UVLO 2.3 V VIN rising 4
Thermal shutdown TSD 150 °C Temperature rising 4
Thermal shutdown hysteresis TSD(HYS) 14 °C 4
High level input voltage VIH 2 V VIN = 2.3 V to 6 V 4
Low level input voltage VIL 0.5 V VIN = 2.3 V to 6 V 4
Input leakage current Ilkg 0.1 μA EN = FREQ = GND 4
Transconductance error amplifier gm 107 μA/V 4
Feedback input bias current IFB 0.1 μA VFB = 1.238 V 4
Line regulation 0.0002 %/V VIN = 2.3 V to 6 V, IOUT = 10 mA 4
Load regulation 0.11 %/A VIN = 3.3 V, IOUT = 1 mA to 400 mA 4
Junction-to-ambient thermal resistance (DGK) RθJA 189.3 °C/W 4
Junction-to-case (top) thermal resistance (DGK) RθJC(top) 57.1 °C/W 4
Junction-to-board thermal resistance (DGK) RθJB 109.9 °C/W 4
Junction-to-top characterization parameter (DGK) ψJT 3.5 °C/W 4
Junction-to-board characterization parameter (DGK) ψJB 108.3 °C/W 4

CAD (KiCad official)

  • Symbol: TPS61085DGKT
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: tps61085dgkt-etched.step / tps61085dgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61085dgkt.step / tps61085dgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 1bb954788393db7f, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF