3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61085DGKT
Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm
TPS61085DGKT from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Compensation pin; output of transconductance error amplifier for external feedback network tuning with typical transconductance of 107 μA/V. |
| 2 | FB | input | Feedback input pin for output voltage regulation with nominal voltage of 1.238 V and input bias current of 0.1 μA typical. |
| 3 | EN | input | Enable input; high level (≥2 V) enables device, low level (≤0.5 V) disables with shutdown current of 1 μA maximum. |
| 4 | PGND | power_in | Power ground terminal for device return current. |
| 5 | SW | output | Switch output pin driving internal MOSFET with peak current limit of 2.0 A minimum and on-resistance of 0.13 Ω typical at VGS = 5 V. |
| 6 | IN | power_in | Input supply pin with voltage range of 2.3 V to 6 V and operating quiescent current of 70-100 μA typical. |
| 7 | FREQ | input | Frequency select input; connect to GND for 650 kHz or to IN for 1.2 MHz switching frequency selection. |
| 8 | SS | output | Soft-start output pin with constant charge current of 10 μA typical for external capacitor to minimize startup inrush current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.3 | 6 | V | 4 | ||
| Boost output voltage range | VS | 18.5 | V | Minimum printed as VIN + 0.5 V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range | -0.3 | 7 | V | Pin IN | 3 | ||
| Voltage range on pins EN, FB, SS, FREQ, COMP | -0.3 | 7 | V | 3 | |||
| Voltage on pin SW | -0.3 | 20 | V | 3 | |||
| Operating junction temperature | -40 | 150 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Input voltage range | VIN | 2.3 | 6 | V | 4 | ||
| Boost output voltage | VS | 18.5 | V | Minimum printed as VIN + 0.5 V | 4 | ||
| Operating quiescent current into IN | IQ | 70 | 100 | μA | Device not switching, VFB = 1.3 V | 4 | |
| Feedback regulation voltage | VFB | 1.23 | 1.238 | 1.246 | V | 4 | |
| N-channel MOSFET on-resistance | rDS(on) | 0.13 | 0.2 | Ω | VIN = VGS = 5 V, ISW = current limit | 4 | |
| N-channel MOSFET on-resistance | rDS(on) | 0.15 | 0.24 | Ω | VIN = VGS = 3.3 V, ISW = current limit | 4 | |
| SW leakage current | Ilkg | 10 | µA | EN = GND, VSW = 6 V; minimum printed as TBD | 4 | ||
| N-channel MOSFET current limit | ILIM | 2 | 2.6 | 3.2 | A | 4 | |
| Soft-start current | ISS | 7 | 10 | 13 | μA | VSS = 1.238 V | 4 |
| Oscillator frequency | fS | 0.9 | 1.2 | 1.5 | MHz | FREQ = VIN | 4 |
| Oscillator frequency | fS | 480 | 650 | 820 | kHz | FREQ = GND | 4 |
| Shutdown current into IN | ISDVIN | 1 | μA | EN = GND | 4 | ||
| Undervoltage lockout threshold | UVLO | 2.2 | V | VIN falling | 4 | ||
| Undervoltage lockout threshold | UVLO | 2.3 | V | VIN rising | 4 | ||
| Thermal shutdown | TSD | 150 | °C | Temperature rising | 4 | ||
| Thermal shutdown hysteresis | TSD(HYS) | 14 | °C | 4 | |||
| High level input voltage | VIH | 2 | V | VIN = 2.3 V to 6 V | 4 | ||
| Low level input voltage | VIL | 0.5 | V | VIN = 2.3 V to 6 V | 4 | ||
| Input leakage current | Ilkg | 0.1 | μA | EN = FREQ = GND | 4 | ||
| Transconductance error amplifier | gm | 107 | μA/V | 4 | |||
| Feedback input bias current | IFB | 0.1 | μA | VFB = 1.238 V | 4 | ||
| Line regulation | 0.0002 | %/V | VIN = 2.3 V to 6 V, IOUT = 10 mA | 4 | |||
| Load regulation | 0.11 | %/A | VIN = 3.3 V, IOUT = 1 mA to 400 mA | 4 | |||
| Junction-to-ambient thermal resistance (DGK) | RθJA | 189.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DGK) | RθJC(top) | 57.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DGK) | RθJB | 109.9 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DGK) | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DGK) | ψJB | 108.3 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS61085DGKT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tps61085dgkt-etched.step/tps61085dgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61085dgkt.step/tps61085dgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
1bb954788393db7f, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).